Bertazzoni Gas Range Quick Reference Guide

How do I turn on my gas surface burners?

Aim your phone camera to the QR code to visualize these instructions on your phone.

Step 1: Press the knob for the desired burner all the way in while rotating to the MAX position. Spark plugs will start to tick, and gas will flow to the selected burner.

Step 2: Once the burner is lit, continue to keep the knob pressed in for 5 seconds.

Step 3: After 5 seconds, release the knob. The flame will continue to burn.

Step 4: Rotate the knob to the desired cooking level.

How do I turn on my gas oven?

Open the oven door completely.

Aim your phone camera to the QR code to visualize these instructions on your phone.

Step 1: Press the thermostat knob in the OFF position and keep it pressed all the way in for 2 seconds (count steadily).

Step 2: After 2 seconds, release the knob (3a) and rotate it to either the broil position (if lighting the broiler) or the maximum temperature position (if lighting the bake burner) (3b).

Note: Once the knob is released, spark plugs will tick for 10 seconds, and gas will flow for 10 seconds. The selected burner should light within 2-3 seconds.

Step 3: Once the spark plugs stop ticking, check that the bake or broil burner stays on.

Step 4: Leave the oven door open for an additional 20-25 seconds.

Step 5: At the end of the 20-25 seconds, close the oven door.

Step 6: Rotate the knob to the desired cooking temperature for the bake burner, if using the bake burner.

For more information, visit bertazzoni.com.