Tristar VE-5898 / VE-5899 Pedestal Fan - Instruction Manual

Safety Precautions

This appliance is not intended for use by children under 8 years old. Children aged 8 and above, or persons with reduced physical, sensory, or mental capabilities, may use the appliance if supervised or instructed on safe usage and understanding the risks. Children should not play with the appliance. Keep the appliance and its cord out of reach of children under 8. Cleaning and maintenance should only be performed by children over 8 under supervision.

The manufacturer is not liable for damages resulting from failure to follow safety instructions.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.

Never move the appliance by pulling the cord, and ensure the cord does not become entangled.

The appliance must be placed on a stable, level surface.

Do not leave the device unattended while connected to the power supply.

This appliance is intended for household purposes only and for the purpose for which it is made.

To protect against electric shock, do not immerse the cord, plug, or appliance in water or any other liquid.

Parts Description

• 1. Front guard
• 2. Fan blade lock button
• 3. Fan blades
• 4. Locknut for the rear guard
• 5. Rear guard
• 6. Oscillation pen
• 7. Clip
• 8. Control buttons
• 9. Knob for height adjustment
• 10. Base
• 11. Stand feet
• 12. Remote control

Before First Use

• Remove the appliance and accessories from the box. Remove any stickers, protective foil, or plastic from the device.
• Place the device on a flat, stable surface, ensuring at least 10 cm of free space around it. This device is not suitable for installation in a cabinet or for outdoor use.
• Plug the power cable into the socket. Ensure the voltage indicated on the device matches the local voltage (220V-240V 50/60Hz).

Assembly

• Unscrew the four screws from the stand feet and cross the stand feet.
• Place the pedestal on the feet and fasten the four screws.
• Remove the height adjustment ring by unscrewing and sliding it upwards.
• Slide the stand cover down onto the base and screw the height adjustment ring back into place.
• Loosen the height adjustment ring to extend the extension rod, then tighten it back into place.
• Loosen the rear fixing knob and attach the extension rod.
• Unscrew the rear locking ring from the motor shaft counter-clockwise.
• Set the rear cage, fitting it onto the two position holes, ensuring they align with the holes on the rear cage.
• Hold the rear cage and screw the rear locking ring clockwise into the motor front cover.
• Install the fan blade onto the motor shaft and fit the fan blade lock cap.
• Loosen the screw and nut at the bottom of the rear cage.
• Open the front cage clips and position the front cage onto the rear cage, ensuring the screw at the bottom is aligned between both.
• Tighten the screw and nut.
• Close the cage clips over both the front and rear cages.

Use

• Use the speed control knobs to select the desired ventilation level (low, medium, high).
• To make the fan head oscillate, push down the Oscillation Knob.
• To stop the fan head from oscillating, pull up the Oscillation Knob.
• Press the off button to turn off the fan.

Using the Remote Control

• Press the on/speed control button to turn on the appliance. Each press cycles through low, medium, and high fan speeds.
• Select the wind type by pressing the mode button: normal wind, nature wind, or sleep wind.
• Press the timer button to activate the timer.
• When the fan is on, press the timer key to set the desired shut-down time (0.5-7.5 hours).
• Press the off button to turn off the fan.

Cleaning and Maintenance

• Clean the appliance with a damp cloth. Do not use harsh or abrasive cleaners, scouring pads, or steel wool, as they can damage the device.
• Never immerse the electrical device in water or any other liquid. The device is not dishwasher-safe.

Environment

At the end of its service life, this appliance should not be disposed of with regular household waste. It must be taken to a central collection point for the recycling of electrical and electronic domestic appliances. The symbol on the appliance, in the instruction manual, and on the packaging highlights this important issue. The materials used in this appliance are recyclable. By recycling used domestic appliances, you contribute significantly to protecting our environment. Please contact your local authorities for information regarding collection points.

Support

All available information and spare parts can be found at www.tristar.eu.