Tristar VE 5898 / VE 5899 Stand Fan

Safety Instructions

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the appliance unattended while it is connected to the supply.
• This appliance is only to be used for household purposes and only for the purpose it is made for.
• To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
• Never insert your fingers or any other object into the air outlet. Take special care to warn children of these dangers.
• Do not use the unit: near a source of fire. in an area exposed to direct sunlight. in an area where water is likely to splash. near a bath, a shower or a swimming pool.
• ⚠️ WARNING: Do not wrap the cable around the main body of the appliance during or after use.
• ⚠️ WARNING: Misuse of the appliance could cause personal injury.
• This appliance is intended to be used in household and similar applications such as: Staff kitchen areas in shops, offices and other working environments. By clients in hotels, motels and other residential type environments. Bed and breakfast type environments. Farm houses.

Regulatory Information and Symbols

• This product complies with conformity requirements of the applicable European regulations or directives.
• Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or local store for recycling advice.
• The Green Dot is the registered trademark of Der Grüne Punkt – Duales System Deutschland GmbH and is protected as a trademark worldwide.
• The universal recycling symbol ♻️, logo, or icon is an internationally recognized symbol used to designate recyclable materials. The recycling symbol is in the public domain and is not a trademark.
• The Eurasian Conformity mark (EAC) is a certification mark to indicate products that conform to all technical regulations of the Eurasian Customs Union.
• In a double-insulated appliance, two insulation systems are provided instead of an earth wire. No earthing means is provided on a double-insulated appliance, nor should a means for earthing be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should only be done by qualified service personnel. The replacement parts for a double-insulated appliance must be identical to the parts they replace. A double-insulated appliance is labelled with the words 'CLASS II' or 'DOUBLE INSULATED'. It can also be identified with the double insulation symbol.
• The product and packaging materials are recyclable, subject to extended manufacturer responsibility. Dispose it separately, following the illustrated packaging symbols, for better waste treatment. The Triman logo is valid in France only.

Parts Description

The fan consists of the following parts:

1. Front guard
2. Fan blade lock button
3. Fan blades
4. Locknut for the rear guard
5. Rear guard
6. Oscillation pen
7. Clip
8. Control buttons
9. Knob for height adjustment
10. Base
11. Stand feet
12. Remote control

Before First Use

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
• Connect the power cable to the socket. (Note: Make sure the indicated voltage on the device matches the local voltage before connecting the device. Voltage 220V-240V~ 50-60Hz.)

Assembly

• Place the feet on the pedestal and push / click them into place.
• Insert the base tube into the pedestal and turn to lock it into place.
• Remove height adjustment ring by unscrewing and sliding up.
• Slide stand cover down onto the base and screw the height adjustment ring back in place.
• Loosen height adjustment ring to extend the extension rod and tighten back into place.
• Loosen rear fixing knob and attach extension rod.
• Unscrew the rear locking ring from the motor shaft in anti-clockwise direction.
• Set the rear cage and fit it well on the two position holes and make sure these holes are properly put through the holes on the rear cage.
• Hold the rear cage and screw the rear locking ring into the motor front cover in a clockwise direction.
• Install the fan blade onto motor shaft and fit the fan blade lock cap.
• Loosen the screw and nut on the bottom of the rear cage.
• Open front cage clips and position onto rear cage ensuring the screw bottom is aligned between both.
• Tighten screw and nut.
• Close the cage clips over both front and rear cage.

Use

• Use the speed control knobs to choose the desired ventilation level.
• To make the fan head oscillate, push down the Oscillation Knob.
• To stop the fan head from oscillating, pull-up the Oscillation Knob.
• Press the off button to turn off the fan.

Using the Remote Control

• Press the on/speed control button to turn on the appliance. With each press on the on/speed control button you will be able to switch the fan speed between low, medium, and high.
• Select the wind type setting be pressing the mode button on the remote control. With each press on the mode button you will be able to switch the fan between normal wind, nature wind and sleep wind.
• Press the timer button to activate the timer.
• When the fan is on, press the timer key to set the desired shut down time 0.5-7.5 hours.
• Press the off button to turn off the fan.

Cleaning and Maintenance

• Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
• Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.

Environment and Disposal

• This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances.
• This symbol ♻️ on the appliance, instruction manual and packaging puts your attention to this important issue.
• The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment.
• Ask your local authorities for information regarding the point of recollection.

Support

You can find all available information and spare parts at www.tristar.eu!