L-Shaped Gaming Desk
Model: CB10515
This instruction booklet contains important safety information. Please read and keep for future reference.
Contact Information
If you're having difficulty, our friendly customer team is always here to help.
USA: cs.us@costway.com
AUS: cs.au@costway.com
GBR: cs.uk@costway.com
DEU: cs.de@costway.com
FRA: cs.fr@costway.com
ITA: cs.it@costway.com
ESP: cs.es@costway.com
POL: sklep@costway.com
Before You Start
- Please read all instructions carefully.
- Retain instructions for future reference.
- Separate and count all parts and hardware.
- Read through each step carefully and follow the proper order.
- We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Always place the product on a flat, steady and stable surface.
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Parts List
The following parts are included in the package:
- A x2
- B x2
- C x2
- D x1
- E x1
- F x2
- G x2
- H x1
- I x6
- J x4
- K x1
- L x1
Hardware
- M6X25mm (1) x7
- M6 Foot / M6-Fuß / M6 Pied / M6 Pie / M6 Piede / M6 Nóżka (2) x6
- Allen Wrench / Innensechskantschlüssel / Clé Allen / Llave Allen / Chiave a brugola / Klucz imbusowy (3) x1
- M6X12mm (4) x24
- M6X40mm (5) x6
- M6X30mm (6) x16
- M4X14mm (7) x14
- M4X10mm (8) x4
- (9) x4
- (10) x1
- (11) x1
- (12) x1
Assembly Steps
- Step 1: Attach part E to part H using screws (1) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 2: Attach parts B to the assembled E and H structure using screws (5) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 3: Attach parts A to the structure using screws (1) and part (10). Ensure screws are aligned before fully tightening.
- Step 4: Attach parts A to the structure using screws (6) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 5: Attach parts C to the structure using screws (6) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 6: Attach part E to the structure using screws (1) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 7: Attach part D to the structure using screws (5) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 8: Attach parts F to the structure using screws (2) and Allen Wrench (3). Ensure screws are aligned before fully tightening.
- Step 9: Continue assembling using parts (7), (8), (11), and (12) as indicated in the diagrams.
- Step 10: Final assembly check.
- Step 11: Attach the desk surface components using screws (4) and (9).
Important Note: Please do not fully tighten screws until all screws are aligned with the holes.
Return / Damage Claim Instructions
- DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
- Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
- Take a photo of the damaged part (if applicable). A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
- Send us an email with the images requested. Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.
