Numark Mixstream Pro Go Quickstart Guide
1. Getting Started
Package Contents: Mixstream Pro Go, Power Supply, USB Cable, Getting Started Card, Display Cleaning Cloth, Quickstart Guide, Safety & Warranty Manual.
Resources:
- Register your product: NUMARK.COM/MIXSTREAM-GET-STARTED
- Download the User Guide
- Download included software
- Watch tutorial videos
2. Connection Diagram
Connections:
- Power/Charging port
- USB-B Port: Connect to computer.
- USB-A Ports: Connect to hard drives or SoundSwitch DMX interfaces.
- Main Outputs (XLR or RCA)
- Mic Input (Front Panel, 1/4")
- Headphones (Front Panel, 1/4" and 1/8")
3. Operation
Engine DJ Standalone OS
Connect a USB drive or SD card, or use built-in Wi-Fi to connect to streaming services or access your library from the cloud.
7" HD Touchscreen
Multi-gesture support allows you to browse and load tracks and view responsive waveforms. Press VIEW to cycle between Performance and Library Views. Press SHIFT+VIEW to cycle between horizontal and vertical waveforms.
Built-In Battery
The CHARGING LED next to the POWER button will be solid red when charging and turn off when fully charged.
Onboard Speakers
With independent volume control using the SPEAKER LEVEL knob.
Smart Scratch
SCRATCH MODE buttons (SMART, NORMAL, SCRATCH): Press to disable or enable Smart Scratch. When enabled, the track's timeline continues when you use the platter to scratch. When the platter is released, the track will resume normal playback. When disabled, use the platter to scratch as you would with a vinyl record. Press SHIFT and this button to enable jog mode to adjust the track's speed with the platter.
Pad Modes: CUE (Set and jump to hot cue points), SAVED LOOP (Create and trigger manual loops), AUTO LOOP (Trigger automatic, time-based loops), ROLL (Trigger loop rolls as the track continues). Press each button a second time to access a second bank of values for the four performance pads.
Built-In Software Effects
Use the FX SELECT buttons to select an effect. Move the FX TOGGLE switch away to latch the effect. Hold the switch toward you to activate it momentarily. Use the touchscreen to adjust the FX RATE and WET/DRY.
Control Center
Press MENU to open the Control Center, where you can access Source, Wi-Fi, Record, User Profile, and Settings menus.
Engine Lighting
Press LIGHTING to open Engine Lighting view to control compatible light fixtures.
For More Information
Download the full user guide at ENGINEDJ.COM