Akko PC98 Plus User Manual
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Technical Specifications
| Dimensions | Approximately 386x136x41mm | Weight | Approximately 1.2kg |
|---|---|---|---|
| Country of Origin | China | Type | Mechanical Keyboard |
| Keycap | PBT Material | Connection | Bluetooth/USB/2.4Ghz |
| Interface | Type-C To USB | Battery Capacity | 3000mAh |
| Multimedia Keys | YES | N-Key Rollover | YES |
| Key/Lighting Effects Customization | The keyboard can only be customized with driver in wired mode | ||
HotKeys
Note: The following features are realized by the combination of "Fn" + corresponding key
| Key Combination | Function | Key Combination | Function |
|---|---|---|---|
| F1 | File Explorer | I | Insert |
| F2 | P | PrtSc | |
| F3 | Windows Search | C | Calculator |
| F4 | Browser Homepage | M | Mute |
| F5 | Media | < | Decrease Volume |
| F6 | Pause / Playback | > | Increase Volume |
| F7 | Previous Song | W | Swap WASD with ↑↓←→ |
| F8 | Next Song |
System Commands (Windows)
| Command | Action |
|---|---|
| Lock Windows Key | Press Fn and left Win key |
| Restore Factory Settings | Hold down Fn and press ~ key for 5S |
| Enter Windows system | Hold down Fn and press Q key for 3S |
| Enter Mac system | Hold down Fn and press O key for 3S |
System Commands (Mac)
| Key | Function | Key | Function |
|---|---|---|---|
| F1 | Decrease display brightness | F7 | Skip back (Audio) |
| F2 | Increases display brightness | F8 | Pause/Play (Audio) |
| F3 | Open mission control | F9 | Skip forward (audio) |
| F4 | Activate Siri | F10 | Mute |
| F5 | N/A | F11 | Volume down |
| F6 | N/A | F12 | Volume up |
| Left Win | Option | ||
| Left Alt | Command | ||
| Right Alt | Command | ||
| Fn + (F1~F12 ) | F1 ~ F12 |
Backlight Settings
Note: The following features are realized by the combination of "Fn" + corresponding key
| Key Combination | Function | Key Combination | Function |
|---|---|---|---|
| - | Lower Animation | Home | Effect1 - Effect5 |
| = | Faster Animation | End | Effect6 - Effect10 |
| L | Light On / Off | PgUp | Effect11 - Effect15 |
| ↑ | Bright | PgDn | Effect16 - Effect20 |
| ↓ | Dim | Z | PC Case Light Brightness Change |
| ← | Set animation direction to left | X | PC Case Light Animation Speed Change |
| → | Set animation direction to Right | Left Ctrl | PC Case Light Effect Change |
| \ | 7 different backlit colors + RGB loop | Left Alt | 7 different side LED colors + RGB loop |
Bluetooth Feature Overview
The keyboard supports multiple connection modes:
- Fn + E: Bluetooth device 1. Short press to connect with slow flashing blue LED; Press and hold to pair device with fast flashing blue LED.
- Fn + R: Bluetooth device 2. Short press to connect with slow flashing blue LED; Press and hold to pair device with fast flashing blue LED.
- Fn + T: Bluetooth device 3. Short press to connect with slow flashing blue LED; Press and hold to pair device with fast flashing blue LED.
- Fn + Y: 2.4G wireless device. Short press to connect with slow flashing green LED.
- Fn + U: Wired mode. The lighting effect will be restored when pairing succeeds.
Indicators:
- Num Lock
- Battery Level Indicator
- Lock Win
Bluetooth Setup Instructions
1. Switching to Bluetooth Mode
- When the keyboard is unplugged, turn the back switch to ON. Long press Fn + E / R / T to start pairing with Bluetooth devices. The keyboard enters pairing mode when blue LEDs under E / R / T keys flash quickly.
- When the keyboard is plugged in via USB, it automatically enters Bluetooth mode. Long press Fn + E / R / T to enable Bluetooth pairing. The keyboard enters pairing mode when blue LEDs under E / R / T keys flash quickly.
2. Setting the Bluetooth Profile
The keyboard supports Bluetooth 5.0 (device names: PC98BP-1, PC98BP-2, PC98BP-3) and Bluetooth 3.0 (device name: Akko PC98BP BT3.0). The system memorizes the last connected device before Bluetooth mode is turned off.
3. Bluetooth Pairing
The keyboard can be paired with PCs, Pads, and smartphones. When searching for Bluetooth devices, two groups of names may appear: Akko PC98BP BT3.0 (Bluetooth 3.0) and PC98BP-1 (Bluetooth 5.0). Select a group based on preference. Note: Some devices may only detect the Bluetooth 5.0 group.
4. Switching Bluetooth Device
After pairing up to 4 Bluetooth devices, press Fn+E / Fn+R / Fn+T / Fn+Y for at least 3 seconds to quickly switch between them.
5. Shutting off the Keyboard
Turn off the power switch on the back panel for power saving. The keyboard enters sleep mode after 15 minutes of inactivity and can be woken by pressing any key. Note: Windows system's battery saver mode may affect sleep activation time.
6. Resetting the Keyboard
If you forget a paired device or experience Bluetooth connection issues, remove the PC98 keyboard from your computer's Bluetooth cache.
Key/Lighting Effects Customization Instruction
- Key and lighting effects customization can be programmed using the Akko driver.
- In wired mode, lighting effects can also achieve audio visualizer effects with the Akko driver.
- Download the "Akko Cloud" driver from the Akko website.
- Users can download the driver via en.akkogear.com.
Akko Warranty and Service Statement
1. Akko provides a 1-year warranty for customers in mainland China for non-man-made damage. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko can provide instructions for self-repair, but users assume full responsibility for any loss during self-repair.
3. Disassembling the keyboard without manufacturer/seller's instruction will immediately void the warranty.
4. Return and warranty policies may vary by platform and are subject to the specific distributor at the time of purchase.
Precautions
Man-made damage is not limited to immersion, falling off, and pulling off wires with excessive forces, etc. Please handle the electronic product with care.
Contact Information
After-sales Phone: 0755-27728007
After-sales QQ: 981572876
Official service hours are Monday to Friday, 10:00 AM to 6:00 PM. Holidays are based on national statutory holidays.
Please note that service times may vary due to uncontrollable factors such as repair time, logistics, and parts procurement. Actual repair times will be assessed based on the damage situation.
