Naxa NE-979 True Wireless Earphones & Charging Case
Instruction Manual
Introduction
Congratulations on choosing Naxa's True Wireless Bluetooth® Earphones & Charging Case. This manual will guide you through operating your new device. It is recommended to familiarize yourself with the Bluetooth functionality of your mobile phone or other external devices before using the Naxa True Wireless Bluetooth® Earphones & Charging Case.
Package Contents
- NE-979 Earphones & Charging Case
- USB Charging Cable
- Instruction Manual
Safety Instructions
Before using the device, please read the operating instructions carefully and keep this manual for future reference.
- Use the appliance only for its intended purpose.
- Warning: Do not expose the appliance to extreme temperatures, strong temperature fluctuations, direct sunlight, or humidity.
- To prevent potential auditory damage, avoid listening to music at high volumes for extended periods.
- Do not place naked flame sources, such as lit candles, on the appliance.
- This appliance is intended for use in temperate climates only.
- Dispose of electric and electronic equipment separately. Do not mix with unsorted municipal waste; ensure separate collection.
- Pay attention to the environmental aspects of battery disposal.
- The appliance contains non-replaceable batteries.
- Batteries (battery pack or installed batteries) must not be exposed to excessive heat (e.g., sunshine, fire).
- Batteries must be removed from the appliance before proper disposal.
- Remove the rechargeable battery only when intending to dispose of the appliance. Have this done by trained professionals.
- CAUTION! Risk of explosion if the battery is replaced with an incorrect type.
- Dispose of used batteries according to the provided instructions.
Product Breakdown
The Naxa NE-979 system consists of two wireless earphones and a charging case. The components are labeled as follows:
- Earphone Components:
- 1. Multi-Function Button: Used for playback control and call management.
- 2. LED Indicator (Earphones): Displays charging and pairing status.
- Charging Case Components:
- 3. Charging Case: Houses and charges the earphones.
- 4. LED Indicator 1 (Charging Status of Earphone): Shows the charging status of the earphones when they are placed inside the case.
- 5. LED Indicator 2 (Charging Status of Case): Shows the charging status of the charging case itself.
- 6. Power Button: Activates charging for the earphones when they are in the case.
- 7. Micro USB Port: Used for charging the charging case.
How to Use
Upon receiving the product, unpack all parts and check for any damage that may have occurred during transportation. If any parts are damaged or missing, please contact the Naxa after-sales service team. Clean the appliance and its components before use.
- Fully charge the earphones and the charging case before the first use.
- To charge, first charge the case, or insert the earphones into the case to charge both simultaneously using the micro-USB charging cable.
- Disconnect the USB cable once charging is complete.
WARNING: Never use detergents, solvents, abrasive products, scouring pads, abrasive cleaners, sharp objects, or wire brushes to clean the product.
Storage
- Store the earphones securely within the charging case.
- Recharge the charging case regularly, especially if it will not be used for extended periods (e.g., more than 6 months), to maintain battery health.
Bluetooth® Operation
- Remove the earphones from the charging case.
- Press and hold the Multifunction button (1) on both earphones for approximately 2 seconds. You will hear a "POWER ON" voice prompt, and the blue and red LEDs (2) on both earphones will begin to blink alternately, indicating Pairing Mode.
- On your mobile device, turn on Bluetooth. Search for available devices and select "NAXA NE-979" to establish a connection.
- Once pairing is successful, the blue LEDs (2) on both earphones will blink slowly, and you will hear a "CONNECTED" voice prompt.
Note: After successful pairing, the earphones will automatically reconnect to the last paired device when turned on within range and when Bluetooth is enabled on the mobile device.
A low battery level may result in a poor Bluetooth connection. If the Bluetooth connection is lost, recharge the batteries and repeat the pairing steps.
Playback
- To play a song through your Bluetooth earbuds, press the multi-function button once.
- To pause a song, press the multi-function button again.
Answering Calls
- To answer an incoming call, briefly press the multi-function button once.
- To end an active call, briefly press the multi-function button again.
- To reject an incoming call, press and hold the multi-function button for 2 seconds.
- To redial the last number, press the multi-function button twice.
Charging Earbuds
- Open the lid of the charging case.
- Insert the earphones into their respective slots within the case.
- Press the power button (6) located on the bottom of the charging case. The earphones will begin to charge.
- The LEDs (2) on the earphones indicate their charging status: Red light means charging; Off means fully charged.
Note: When the earphone batteries are low, an alert tone will sound, and the blue LED indicators (2) will blink slowly.
Charging Case
When fully charged, the case can provide approximately 2.5 full charges to the earphones.
- Insert the micro-USB connector of the charging cable into the micro-USB charging port (8) located on the back of the charging case.
- Connect the USB-A plug of the cable to a USB power adapter plugged into a wall socket or to a computer's USB port.
- The LED (4) on the charging case displays the charging status of the earphones when they are inside the case: Blue light indicates charging; Off indicates fully charged.
- The LED (5) on the charging case displays the charging status of the case itself: Red and blinking indicates charging; Solid Red indicates fully charged.
- Disconnect the USB cable once the charging process is complete.
Note: When the earphone batteries are low, a voice prompt will announce "low battery," and the LED indicators (2) will flash red.
LED Overview
| Charging Case Status | LED Indicator (5) |
|---|---|
| Charging | Red |
| Fully charged | Red |
| Earphones Status | LED Indicator (L/R) (2) | LED Indicator (4) |
|---|---|---|
| Charging in charging case | Red | Blue |
| Fully charged | Off | Off |
| Power on | Blinks red & blue alternately three times | Blinks red & blue alternately three times |
| Pairing mode | Blinks red and blue alternately | Blinks white and red alternately |
| Paired | Blinks blue slowly | Blinks blue slowly |
Specifications
- Bluetooth® Version: 5.0
- Charging Interface: Type-C
- Power Input: DC/5V, 0.5A
- Working Distance: Up to 33 Ft.
- Earbuds Battery Capacity: 45mAh/3.7V
- Supported Profiles: A2DP/AVCTP/AVDTP/AVRCP/HFP
- Music Time: Up to 3 Hours
- Charging Time: 1-2 Hours (Case), 1-1.5 Hours (Earphones)
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS: Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate the equipment.
Support
If you encounter any problems with your device, please consult the instructions in this manual. You can also visit www.naxa.com for the latest news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
Website: http://www.naxa.com/naxa_support/
MADE IN CHINA
