Experience JBL Clip 4
This guide provides a quick overview of your JBL Clip 4 portable speaker, designed for big audio, punchy bass, and rugged durability.
A vibrant image of people on a beach at sunset, holding sparklers, with the text 'QUICK START GUIDE' prominently displayed. The JBL and HARMAN logos are visible.
?What's in the Box
A diagram showing the contents of the box: a JBL Clip 4 portable speaker and a USB-C charging cable.
?Bluetooth Pairing
A step-by-step diagram illustrating Bluetooth pairing:
- Press the Bluetooth button on the JBL Clip 4 speaker.
- On a mobile phone, navigate to Bluetooth settings, turn Bluetooth ON, and select 'JBL Clip 4' from the devices list to connect.
▶️Play
A diagram showing the JBL Clip 4 speaker's playback controls:
- Press the Play/Pause button (▶️/⏸️) once to play or pause.
- Press the Skip Forward button (⏭️) twice to skip to the next track.
- Volume up (?) and down (?) buttons are also indicated for adjusting audio levels.
⚡Charging
A diagram showing the JBL Clip 4 speaker being charged via a USB-C cable. A red light indicates charging, and a flashing red light indicates low battery.
?Carabiner
A diagram demonstrating the integrated carabiner feature of the JBL Clip 4. An arrow indicates how to open the carabiner, and an illustration shows the speaker clipped to a backpack for easy portability.
??Waterproof & Dustproof (IP67)
A diagram illustrating the IP67 waterproof and dustproof rating of the JBL Clip 4. The speaker is shown partially submerged in water, with indicators for up to 30 minutes immersion at a depth of 1 meter.
⚙️Technical Specifications
| Feature | Specification |
|---|---|
| Transducer: | 40 mm / 1.5" |
| Output power: | 5 W RMS |
| Frequency response: | 100 Hz – 20 KHz |
| Signal-to-noise ratio: | > 85 dB |
| Battery type: | Lithium-ion polymer 3.885 Wh |
| Battery charge time: | 3 hours (5 V / 500 mA) |
| Music playtime: | up to 10 hours (varies by volume level and audio content) |
| Bluetooth® version: | 5.1 |
| Bluetooth® profile: | A2DP 1.3, AVRCP 1.6 |
| Bluetooth® transmitter frequency range: | 2400 – 2483.5 MHz |
| Bluetooth® transmitter power: | ≤ 10 dBm (EIRP) |
| Bluetooth® transmitter modulation: | GFSK, π/4 DQPSK, 8DPSK |
| Dimensions (W x H x D): | 86.30 x 134.50 x 46.0 mm / 3.4" x 5.3" x 1.8" |
| Weight: | 0.239 kg / 0.527 lbs |
?Battery Care and Safety Information
⚠️To protect battery lifespan, fully charge the JBL Clip 4 at least once every 3 months. Battery life varies due to usage patterns and environmental conditions.
Do not expose the JBL Clip 4 to liquids without removing cable connections. Do not expose the JBL Clip 4 to water while charging. This may result in permanent damage to the speaker or power source.
After a liquid spill, do not charge the speaker until it is completely dry and clean. Charging when wet might damage the speaker.
When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.
Compliance Information
This product is approved by Anatel (Brazil's National Telecommunications Agency) in accordance with telecommunications product evaluation procedures and applicable technical requirements. For more information, consult the Anatel website: www.anatel.gov.br. This equipment is not entitled to protection against harmful interference and may not cause interference in duly authorized systems.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Manufacturer: HARMAN International Industries, Incorporated, USA, 06901 Connecticut, Stamford, Atlantic Street 400, Office 1500. Made in China.
Importer: OOO "HARMAN RUS CIS", Russia, 127018, Moscow, Dvinchev St., 12, b. 1.
Warranty period: 1 year. Service life: 2 years.
Information on service centers: www.harman.com/ru.
Technical support: 8 (800) 700 0467.
Organization authorized to accept consumer claims: OOO "HARMAN RUS CIS".
Product certified.
The device manufacturing date is determined by two letter designations from the second group of symbols in the product's serial number, following the separator "-". The encoding corresponds to the Latin alphabet, starting from January 2010: 000000-MY0000000, where "M" is the month of manufacture (A - January, B - February, C - March, etc.) and "Y" is the year of manufacture (A - 2010, B - 2011, C - 2012, etc.).
EAC CE Markings.
