ILIFE A10s Laser Navigation Robotic Vacuum User Manual

Introduction

Dear Customer,

Thank you for purchasing ILIFE A10s robot vacuum cleaner! You've joined the millions of people who clean with robots - the smarter way to get it down.

Please take a few moments to read this manual and get acquainted with your robot, to get the best performance from your robot. If you have any problem, please don't worry, you are supposed to contact our customer service first or visit our website at www.iliferobot.com for more information.

Stay connected with us on Facebook and Twitter to enjoy these exclusive benefits:

• Get support tailored to your specific robot, including answers to questions, maintenance tips, video demos, live chat and more.
• Get product updates and other valuable information about new robots, exclusive discounts and special promotions.

Connect with us right now at:

Facebook: facebook.com/iliferobotics

Twitter: twitter.com/ILIFEROBOTUS

Enjoy a thorough clean every day in your life!

Best regards,
ILIFE Innovation

ILIFE Customer Service

Russia

? 89299401228 (Mon-Fri: 9:00 - 18:00)

✉️ service_russia@iliferobot.com

Other countries

✉️ support@iliferobot.com

For more detailed information, please visit: www.iliferobot.com

Safety Instructions

Before using this product, please read the following safety precautions.

• Read this user manual thoroughly and carefully before using this product.
• Save this user manual.
• Any operations that oppose to descriptions in this user manual may lead to harm to human or this product.

WARNING

1. Only the certified technician may disassemble the product. Users are not allowed to disassemble or repair the product.
2. Only use the adapter provided by the factory. Using other un-matched adapter may cause electric shock, fire or product damage.
3. Do not touch the power cord, plug or adapter when your hands are wet.
4. Do not make clothes or part of a body drawn into the product's wheels.
5. Do not make this product close to cigarette, lighter, match or any flammables.
6. If the product is needed to clean, clean it after charging is stopped.
7. Do not over-bend the power cord or pressure the power cord with heavy or sharp objects.
8. This product is used only indoors, do not use it outdoors.
9. Do not sit on top of this product or attach an object on the top of it.
10. Do not use this product in wet or moist environment (any environment with liquid).
11. Before use, remove all the damageable objects (textile, glass, lighting, etc) and objects that could get caught in the brushes or suck passage(cords, clothing, papers, drapes, blinds, etc).
12. Do not place this product where it is easy to drop off (tables, chairs, etc).
13. Turn off the power switch during transportation or when you don't need to use this product for a long time.
14. Before use, check whether adapter and outlet are properly connected. Or else the battery may be damaged.
15. To avoid tripping, inform all the people in the house when this product is working.
16. Do not use this product when dustbin is full.
17. Use this product in temperature from -10° to 50° (centigrade degree).
18. Do not place this product in high-temperature environment.
19. The battery must be removed from the product before it is scrapped.
20. The product must be disconnected from the supply mains when removing the battery.
21. The battery is to be disposed of safety.
22. Use factory-authorized battery only, do not use unmatched battery.

? NOTE: This product could not be used by children, mentally challenged people or people lack of related experience and knowledge (Unless there people instruct or supervise them).

Product Components

Main Body

The main body of the robot vacuum cleaner includes the following parts:

• Top View: Circular robot with a central control button (Auto Button), WiFi Indicator light, Radar sensor component on top, and a Dustbin Release Button.
• Bottom View: Underside of the robot showing Cliff Sensors, Charging Pins, Battery Cover, Side Wheels, Nose Wheel, Side Brushes, Main Brush, and Dustbin.
• Side View (Dustbin area): Shows the Power Switch and Power Socket.

Dustbin

The dustbin assembly consists of:

• High Performance Filter
• Dustbin Release Button
• Dustbin compartment
• Isolation Support

Water Tank

The water tank assembly for mopping function includes:

• Water Tank
• Water Tank Release Button
• Water Inlet
• Mopping Cloth

Charging Dock

The charging dock includes:

• Charging Pins
• Power Socket
• Power Supply Indicator Light
• Adapter
• Mat

Remote Control

The remote control has the following features:

• Display: Shows time and status.
• Direction Buttons: For navigation control.
• Start/Pause Button: To start or pause cleaning.
• Function Buttons: Clock (⏰), Spot Mode, HOME (Auto Charge ?), Schedule (?), Suction Switch (?), Edge Mode.

Note: Direction buttons cannot be used during a cleaning cycle.

Accessories and Specifications

List of Accessories

The package includes:

• Main Body
• Charging Dock/Mat
• Water Tank/Mop Cloth
• Remote Control
• Power Adapter
• Cleaning Tool
• Rubber Brush
• Extra Side Brushes (x2)
• User Manual
• High Performance Filter

Product Specifications

How To Use

Charging

1. Placing Charging Dock

• Plug the adapter into the charging dock.
• Align it well and place the mat under the charging dock.
• Put the charging dock against a wall and remove obstacles and reflective objects about 1 meter on both sides and about 2 meters in front. The diagram shows these clearances: 1m (3.2') on each side and 2m (6.5') in front.
• Connect to power.

Note: Once connected to power, the indicator light on the charging dock stays on.

2. Turning on Power Switch

Turn on the power switch on the side of the main body. The switch has two positions: "-" for ON and "O" for OFF.

Note: Do not switch off the robot after use. Always keep the robot fully charged for the next task.

3. Charging the Robot

A. Auto Charge

• When the battery runs low in Auto mode, the robot will automatically search for the charging dock for recharge.
• While on standby, press the ? (HOME/Auto Charge) button on the remote control. The robot will start searching the charging dock for recharge.

Reminder: To avoid lowered charging performance, make sure the charging pads on the main body and charging dock are clean.

B. Manual Charge

• Turn on the power switch on the side of the main body.
• Plug in the adapter and connect to power.

Reminders:

1. For regular use, always leave the main body on the charging dock, and make sure its power switch is turned on.
2. If the robot will not be used for a long time, fully charge it before storing in a cool, dry place.
3. Do not charge the robot manually after a cleaning schedule is set. The robot will not execute scheduled cleaning after manual charge.

Start/Pause/Sleep

• Sleep: Robot is idle; Power switch is on and indicator light is off.
• Standby: Robot is not working; Power switch is on and light at main button is pulsing.
• Start: Robot is working; Green light at Auto button stays on.

1. Turn on the Robot

• Turn on the power switch on the side of the main body.
• Press the ▶️ (Start/Pause) button on the main body to start cleaning.
• Press the ▶️ (Start/Pause) button on the remote control to start cleaning.

Note: While in Sleep mode, press ▶️ to activate standby mode. Press ▶️ again to start cleaning.

2. Pause

Pause means switching from cleaning to standby. To pause a cleaning cycle, press the ▶️ (Start/Pause) button on the remote control or on the main body.

Note: The robot accepts new tasks once it is paused.

3. Sleep

• To enter Sleep Mode:
• A. Press and hold the ▶️ (Start/Pause) button for 3 seconds.
• B. Robot enters Sleep mode automatically after idling for 10 minutes.

Cleaning Modes

Multiple cleaning modes allow the robot to perform deep cleaning in different environments and on different floorings. Use the remote control to select a suitable cleaning mode.

* Before selecting cleaning modes, make sure the robot is standby (power switch is on and the auto button is lighting green).

1. Auto Mode

The most frequently used cleaning mode. Press the ▶️ (Start/Pause) button on the main body or ▶️ on the remote control. The robot plans a path and cleans along a zigzag pattern. During cleaning, the robot detects and cleans areas that have been missed. The diagram shows a zigzag cleaning path.

* The robot plans a cleaning path autonomously during a cleaning cycle. If the robot is moved manually or with the remote control, it will plan a new path and may repeat areas that have been cleaned.

* The robot may stop working briefly during a cleaning cycle. Wait patiently for it to detect areas that have been missed or to revise the cleaning path. The number and duration of these brief stops depend on the complexity of the home environment.

2. Spot Mode

The robot takes a square path to clean a specific area with concentrated dust and debris. The diagram shows a square cleaning pattern.

3. Edge Mode

While on standby, the robot moves forward until it detects a wall. It cleans around the edges of the walls about once. The diagram shows the robot cleaning along a wall.

4. Suction Switch

Suction can be strengthened or weakened to meet different cleaning needs. Press the ? (Suction Switch) button on the remote control to switch to different suction levels. The diagram shows the robot with different suction levels indicated.

5. Auto Charge

When the battery runs low during a cleaning cycle, the robot will automatically activate the "Auto Charge" function, searching and returning to the charging dock for recharge. Auto Charge can also be activated by pressing the ? (HOME/Auto Charge) button on the remote control. The diagram shows the robot returning to the charging dock.

6. Schedule Mode

Preset cleaning cycles at any specific time. Tap the ? (Schedule) button on the remote control. The display will show an icon and flashing "00:00". The diagram shows the schedule interface.

Schedule Mode (Detailed)

To offer a complete automatic cleaning experience, the robot receives preset cleaning schedules. Set local time and schedules with the remote control or mobile APP. The robot will start cleaning automatically at the preset time every day.

* Before setting local time and cleaning schedules, make sure the power switch on the main body is switched on. A green flashing light indicates the robot is activated from Sleep mode. To activate the robot, tap the ▶️ button on the main body or ▶️ on the remote control.

1. Set Local Time with Remote Control

• Tap the ⏰ (Clock) button. The remote control display will show and flashing "00:00".
• Adjust time with the direction buttons (up/down/left/right). Press the direction buttons to change from hours to minute.
• Press the ▶️ (Start/Pause) button to save local time.

* Voice announcement will confirm the completion of setting.

2. Set a Schedule

• Tap the ? (Schedule) button. The remote control display will show the schedule icon and flashing "00:00".
• Use direction buttons to adjust the schedule time.
• Press the ▶️ (Start/Pause) button to save a schedule.

* Voice announcement will confirm a successful schedule, and the robot will start working at the preset times.

3. Cancel a Schedule

Adjust schedule time to "00:00" and save; or turn off the power switch on the main body.

* Please pay attention to the voice prompt to see if the robot is successfully scheduled.

* Rescheduling is required after changing batteries in the remote control.

Water Tank

This product contains water tank components. After sweeping and vacuuming, replace the dustbin with the water tank for mopping function.

? Important Notes:

• If a cleaning cycle is paused for water refill or mop cloth cleaning, the robot will plan and start a new cleaning path. Completed areas may be cleaned again. For best performance, mop one room at a time.
• Manually move the robot to another room that requires mopping. Refill water and clean the mop cloth, if necessary, before the robot starts mopping.
• Do not use the water tank on carpet. To prevent the mop cloth from staining the carpet, roll up the carpet edges before mopping.
• Make sure there is enough water for mopping during cleaning. Refill water when needed. Remove the water tank before a refill.
• Remove the water tank before charging.

1. Water Refill

Open the water inlet cap. Slowly pour in water with a cup. The diagram shows pouring water into the tank.

2. Attach Mop Cloth

Close the cap tight and attach the mop cloth firmly. Secure with the rings on both sides. The diagram shows attaching the mop cloth.

3. Install Water Tank

Press the dustbin release button to remove the dustbin and replace it with the water tank. The diagram shows swapping the dustbin for the water tank.

4. Mopping

Press the ▶️ (Auto) button to start mopping and vacuuming. The diagram shows the remote control and the robot starting the mopping function.

APP Download

The robot can be controlled by the “ILIFEHOME” app. Scan the QR code to install the app on your iOS or Android device.

(Note: QR codes are excluded as per instructions. Users should search for "ILIFEHOME" app in their respective app stores.)

Maintenance

Make sure the main body is turned off and the adapter is unplugged before accessories maintenance.

Cleaning Side Brushes & Main Brush

Cleaning Side Brushes

Remove side brushes. Wipe clean with a clean cloth. The diagram shows removing and cleaning a side brush.

Cleaning Main Brush

Remove the main brush cover. Take out the main brush. Cut the hair winding around the brush for easy removal. The diagrams show removing the brush cover, taking out the brush, and cleaning it.

Cleaning Sensors & Charging Pins

Use cleaning tools or a soft cloth to clean the sensors and charging pins. Note: Remove dust or foreign objects on sensors and charging pins on the charging dock as soon as possible. The diagrams show the robot's sensors and charging pins.

Cleaning Dustbin & Filters

Clean dustbin and filters after each use:

• A. Take out the dustbin. Check the suction port if there is anything stuck in it. Clean suction port if needed.
• B. Wash replaceable primary filter with water every 15-30 days. Do not squeeze. Air dry after wash.
• C. Tap to remove dust from the high-performance filter. Do not wash with water.

The diagrams show the steps for cleaning the dustbin and its filters.

Cleaning Water Tank Components

1. Cleaning Mop Cloth

Remove: Take out the water tank and mop cloth after each use. The diagram shows removing the mop cloth.

Maintenance: Rinse and dry the mop cloth. The diagram shows rinsing and drying the mop cloth.

2. Cleaning Water Tank

Remove: After each use, remove the water tank and mop cloth, and empty the water tank. The diagram shows emptying the water tank.

Maintenance: Wipe the water tank with a dry cloth before air drying. Do not rinse the water tank directly with water. The diagram shows wiping the water tank.

Note: Do not submerge the vibrating water tank in water.

Troubleshooting

Alert Reference

In case of errors, the red light stays on with voice announcement.

Reminders:

If the solutions above don't help:

1. Restart the main body by turning on the power switch on the side.
2. If problems persist, send robot to the nearest repair service center.

For more detailed information, please visit: www.iliferobot.com