Quick Reference Guide

About your TCL LINKZONE 5G UW

This section describes the physical components of your TCL LINKZONE 5G UW.

• 1. Touch screen: Navigate the screen using your finger.
• 2. Power button:
  • To turn on, press and hold until the welcome message appears.
  • To turn off, press and hold until the Shutdown screen appears, then tap 'shutdown'.
  • Press and release to wake up the display.
• 3. USB-C port:
  • Connect to a power supply using the included USB-C cable and wall adapter.
  • Connect to an "On the Go" (OTG) Cable (sold separately) to recharge other accessories like a smartphone or Bluetooth headset.
• 4. LAN port: Connect an Ethernet cable to a computer for a secure connection.
• 5. Reset button: If the device is unresponsive, insert a sharp object (like a paper clip) into this hole for 3 seconds to reset. Note: All passwords will be reset to default settings.

Status Icons and LED Guide

Status Icons

• ? Home
• ? Network signal strength
• [LAN] LAN connection
• [USB] USB connection
• ? LINKZONE Wi-Fi network
• ? Connected devices
• ? Wi-Fi name/password
• ❌ No network service
• ? SIM card not available
• ? SIM card locked
• ? Unread messages
• ? The battery is fully charged.
• ⚠️ The battery is running low.
• ⚡ The battery is charging.

LED Guide

For a full list of LED definitions, see the User Manual at verizon.com.

Setting up TCL LINKZONE 5G UW

Your device comes with a Verizon 5G SIM card pre-installed.

Replacing the SIM Card:

If the SIM card needs replacement:

1. Open the back cover, remove the battery, and slide the SIM card out of the SIM Card Slot.
2. To reinstall, align the cutout tab and gently slide the card into the slot with the gold metal side down.
3. Reinstall the battery.
4. Close the back cover.

Note: Only a Verizon Nano SIM card can be used.

Step 1: Insert the Battery

To install the battery:

1. Align the metal contacts with the pins inside the battery compartment.
2. Press the battery down until it sits properly in place.
3. Press the back cover into place by aligning the tabs; it only fits one way.

Step 2: Charge the TCL LINKZONE 5G UW

1. Connect one end of a USB-C cable to the device and the other end to a wall charger.
2. Insert the wall charger into an AC power source and charge LINKZONE for 2 hours.

Using TCL LINKZONE 5G UW

Turn your LINKZONE on/off

1. Press and hold the power button to turn on your LINKZONE. Release when the display screen lights up.
2. After the wakeup animation, select your preferred language (English or Spanish) and tap Home screen icons to explore features.
3. A quick press of the power button wakes the display.
4. To turn LINKZONE off, press and hold the power button, then tap "Shutdown" or "Restart" to power cycle.

Connect to LINKZONE network

You have two options to connect:

1. Wired connection:

• Connect the LINKZONE to your computer using the provided USB-C cable.
• Connect an Ethernet cable from the LINKZONE's LAN port to your computer.

2. Wireless Connection:

• Tap "Wi-Fi Name/Password" on the LINKZONE Home Screen.
• On your wireless device, open Settings and turn on Wi-Fi.
• Select the network name (SSID) and enter the password.
• Alternate QR code method: Scan the QR code displayed on the LINKZONE screen using your smartphone's network settings scanner. The device will connect automatically.

Note: The Wi-Fi name and default passwords are also printed on the label underneath the battery.

You can access advanced settings and manage your LINKZONE network from the touchscreen. The Home screen displays network information.

Using TCL Connect App

You can use the TCL Connect App to control your TCL LINKZONE 5G UW.

Download the TCL Connect App:

• Scan the QR code provided on the product box.
• Download from Google Play (Android 5.0+) or the App Store (iOS 11.0+).

Using the App:

1. Open the TCL Connect App on your smartphone.
2. Tap the TCL-MW513U symbol.
3. Follow the on-screen instructions to complete the login process.

Use the app to change settings, monitor usage, and control your LINKZONE.

Note: The admin password is on the label underneath the battery. Keep it in a safe place.

Resetting TCL LINKZONE 5G UW

Note: Resetting disconnects devices and resets network names and passwords.

Reset your LINKZONE to factory settings using one of these methods:

1. Use a sharp object (like a paper clip) to press the "RESET" hole on the side of the LINKZONE for 3 seconds.
2. On the LINKZONE screen, navigate to Menu > Settings > Factory Reset.

Learning More and Support

Learning more:

• Visit verizonwireless.com/support for guides.
• Call 800.922.0204 to order a User Guide.
• A Spanish User Guide is available at verizonwireless.com/support.

Managing your account:

• My Verizon Mobile app: Manage your account, track usage, edit info, and pay your bill.
• International travel: For rates and features outside the US, visit verizonwireless.com/international.
• Customer service: Call 1.800.922.0204 or find support on Twitter @VZWSupport.

Additional Information

Verizon is the mobile carrier for this device. Many services are provided by third parties. Verizon is not responsible for your use of the device or third-party applications, including personal information shared. Specific third-party terms and conditions apply. Please review all applicable terms before use.

© 2022 Verizon Wireless. All rights reserved.

Printed in China.