Lost Vape URSA NANO PRO 2 Pod Kit User Manual
Safety Warnings
Warning for vulnerable consumer groups: This product is not recommended for minors, pregnant or breastfeeding women, or individuals sensitive to nicotine.
Battery Caution: Do not expose the device to extreme temperatures. Do not disassemble the device without Lost Vape's recommendation.
Product Overview
The URSA NANO PRO 2 Pod Kit is a vaping device designed for ease of use and portability. It features a sleek design and advanced technology for an optimal vaping experience.
Getting Started
1. Install the Pod:
- Ensure the device is powered off.
- Insert the URSA cartridge into the device body until it clicks into place.
2. Install the Coil:
- Remove the pod from the device.
- Unscrew the base of the pod.
- Insert the coil into the pod.
- Screw the base back onto the pod.
- Fill the pod with e-liquid (do not exceed the maximum fill line).
- Wait for 5-10 minutes for the coil to prime.
3. Power On/Off:
- Press the power button 5 times within 2 seconds to turn the device on or off. The indicator light will flash to confirm.
Operation
1. Vaping:
- Press and hold the power button while inhaling. Release the button to stop vaping.
2. Adjusting Airflow:
- Locate the airflow control slider on the side of the device.
- Slide the control to adjust the airflow to your preference.
3. Charging:
- Connect the USB Type-C cable to the charging port on the device and to a power adapter.
- The indicator light will show the charging status.
Indicator Lights
| Indicator Status | Meaning |
|---|---|
| Breathing Light (Red) | Low battery |
| Solid Light (Red) | Charging |
| Light Off | Fully charged |
| Flashing Light (Multiple colors) | Device on/off or error status |
Troubleshooting
| Problem | Solution |
|---|---|
| No vapor production |
|
| Leaking |
|
| Weak vapor |
|
Maintenance
- Replace the coil when flavor diminishes or vapor production decreases.
- Clean the pod and device regularly with a dry cloth.
- Avoid exposing the device to water or moisture.
Specifications
Dimensions: [Specify dimensions if available]
Battery Capacity: [Specify battery capacity if available]
E-liquid Capacity: [Specify e-liquid capacity if available]
Coil Resistance: [Specify coil resistance if available]
Package Contents
- 1 x URSA NANO PRO 2 Device
- 1 x URSA Cartridge
- 1 x 0.8Ω MESHC Coil
- 1 x 1.0Ω MESHC Coil
- 1 x USB Type-C Cable
- 1 x User Manual
- 1 x Warranty Card
- 1 x Lanyard (optional)
Contact Information
For support or inquiries, please visit the Lost Vape website or contact their authorized distributors.
