JBC TET Precision Heater Hose Set
User Manual
Product Information
This manual applies to the following products: TE-TB
Brand: JBC
Website: https://www.jbctools.com
Contents ?
- TE Handle (Prod. No. TE-B) - 1 pc.
- Heating Element for TET (Prod. No. 0012374, for 100 V/120 V/230 V) - 1 pc.
- User Manual (Prod. No. 0033374) - 1 pc.
Replacing the TET Heater Hose Set ?️
Perform this operation only when the station is switched off.
Procedure:
- Using the spanner, unscrew the nut [1] and disconnect the tool's flexible hose [2].
- Insert the new hose, ensure it is fully inserted onto the connector [2] and tighten the nut [1].
Diagram Description: The process involves a JBC station, a handle, and the hose connection. A nut [1] is unscrewed to disconnect the hose [2] from the tool. A new hose is then inserted and the nut [1] is tightened.
Features
The TET Precision Heater Hose Set allows for repairs on small and medium SMD circuits. It works with the JTU control unit and TE nozzles.
Replacing the Heating Element ⚙️
Caution: Perform this operation only when the heating element is cold and the device is disconnected from power.
Procedure:
- Loosen screw [1] and pull the used heating element from the grip [2].
- Install the new heating element, ensure it is fully inserted into the stop [2] and tighten screw [1].
Diagram Description: The diagram shows the TE Handle, Heating Element, and TE Nozzle. A tool button activates/stops hot air flow. The heating element (Prod. No. 0012374) is connected to the handle (Prod. No. TE-B). The hose set (Prod. No. TE-TB) is also shown. The replacement involves loosening a screw [1] on the grip [2] to remove the old element and inserting the new one.
* Note: TE Nozzle not included in the set, available separately.
Technical Data
TET Precision Heater Hose Set
Product No.: TE-TB
| Hose length: | 1100 mm / 43.31 inches |
| Net weight: | 187.2 g / 0.413 lb |
| Packaging dimensions/weight (L x W x H): | 300 x 125 x 65 mm / 267.7 g (11.81 x 4.92 x 2.56 inches / 0.590 lb) |
Complies with CE standards. Device is safe regarding ESD requirements.
Warranty ?️
A two-year warranty is provided by JBC for this product, covering all manufacturing defects, including replacement of faulty parts and labor. The warranty does not cover product wear and tear or improper use. To benefit from the warranty, the user must return the product to its original distributor, paying for shipping.
Disposal: Do not dispose of this product with other waste. ♻️ According to EU Directive 2012/19/UE, used electronic equipment must be returned to an authorized waste disposal facility.
Certifications: CE, EAC, PS E
Product Code: 0033374-170725
