Introduction to the Elinchrom ONE
This guide provides essential information to quickly set up and begin using the Elinchrom ONE, a portable lighting solution designed for photographers.
Key Features and Operations
Screen Views and Navigation
- Work Screen: Displays key settings and is shown after inactivity.
- Sub-menu Screen: Allows selection of features via scrolling.
- Screen Lock: Activates touch screen lock via the Menu and Settings.
Connection and Charging
- Operating Temperature: -10°C to 40°C; Charging temperature: 0°C to 40°C.
- USB-C Port: Used for charging and firmware updates.
- USB-C Charger: Use only the original Elinchrom charger.
- Charge Status: Indicated by the side logo color (Red: recharging, Orange: almost charged, Green: charged).
- Recharging Time: Approximately 100 minutes for a full charge.
Setup Menu Overview
Access the setup menu to configure various functions including:
- Action Mode, Photocell, Sound settings
- Flash and Modlamp parameters (e.g., Flash scale, Modlamp Timer)
- Auto stand-by and Auto-off timers
- EL logo mode and color
- Connection options like Skyport, Bluetooth, and Wi-Fi setup.
Control Panel and Display
- Navigate menus by tapping the screen with two fingers.
- Swipe gestures are used for changing values and selecting options.
- The display panel shows group information, battery status, and power settings.
- Group colors (blue, yellow, red, green) correspond to selected groups and illuminate the Elinchrom logo.
Support and More Information
For detailed specifications, troubleshooting, and further assistance, please visit the official Elinchrom website.
Elinchrom | What's your next adventure?
