VEVOR Nesting Tables YJX-CTS-005

Product Overview

This document provides original instructions for the VEVOR Nesting Tables, Model YJX-CTS-005. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the item received. VEVOR will not provide further notice for technology or software updates.

⚠️ WARNING

Please read this manual carefully before using the product. Failure to do so may result in serious injury.

Assembly Instructions: Please read and observe carefully all the assembly instructions before beginning assembly.

Assembly Personnel: ? x2 Unit should be assembled by two or more people.

Child Safety: ?? Please do not let your child climb on the product. If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come with the package.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Nesting Tables.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy. Do not allow children to play with or near this item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Nesting Tables.
4. Use as intended only.
5. Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

Parts:

• Part 1: Large round tabletop (x1)
• Part 2: Large circular base frame (x1)
• Part 3: Large curved support (x1)
• Part 4: Large vertical support legs (x3)
• Part 5: Small round tabletop (x1)
• Part 6: Small circular base frame (x1)
• Part 7: Small curved support (x1)
• Part 8: Small vertical support legs (x3)

Hardware:

• Hardware A: Screw M6×35mm (x6)
• Hardware B: Screw M6×25mm (x8)
• Hardware C: Screw M6×12mm (x12)
• Hardware D: Allen Wrench M4 (x1)
• Hardware E: Screw M6 (x8)

ASSEMBLY STEPS

Step 1: Assemble Large Table Base

Attach the three large vertical support legs (Part 4) to the large circular base frame (Part 2). Use six screws (Hardware C) and the Allen wrench (Hardware D). Ensure the legs are securely fastened to the base frame.

Diagram Description: Shows three vertical legs (4) being attached to the large circular base frame (2) using screws (C) and the Allen wrench (D).

Step 2: Attach Large Table Curved Support

Attach the large curved support (Part 3) to the assembly from Step 1. Use three screws (Hardware A) and the Allen wrench (Hardware D). The curved support connects to the vertical legs.

Diagram Description: Shows the large curved support (3) being attached to the vertical legs (4) of the partially assembled large table using screws (A) and the Allen wrench (D).

Step 3: Attach Large Tabletop

Place the large round tabletop (Part 1) onto the assembled base structure. Secure the tabletop using eight screws (Hardware B) and eight screws (Hardware E). Use the Allen wrench (Hardware D) for tightening.

Diagram Description: Shows the large tabletop (1) being placed on the assembled frame and secured with screws (B) and (E), using the Allen wrench (D).

Step 4: Complete Large Table

The large nesting table is now assembled.

Diagram Description: Shows the fully assembled large nesting table.

Step 5: Assemble Small Table Base

Attach the three small vertical support legs (Part 8) to the small circular base frame (Part 6). Use six screws (Hardware C) and the Allen wrench (Hardware D).

Diagram Description: Shows three vertical legs (8) being attached to the small circular base frame (6) using screws (C) and the Allen wrench (D).

Step 6: Attach Small Table Curved Support

Attach the small curved support (Part 7) to the assembly from Step 5. Use three screws (Hardware A) and the Allen wrench (Hardware D). The curved support connects to the vertical legs.

Diagram Description: Shows the small curved support (7) being attached to the vertical legs (8) of the partially assembled small table using screws (A) and the Allen wrench (D).

Step 7: Attach Small Tabletop

Place the small round tabletop (Part 5) onto the assembled base structure. Secure the tabletop using eight screws (Hardware B) and eight screws (Hardware E). Use the Allen wrench (Hardware D) for tightening.

Diagram Description: Shows the small tabletop (5) being placed on the assembled frame and secured with screws (B) and (E), using the Allen wrench (D).

Step 8: Complete Small Table

The small nesting table is now assembled.

Diagram Description: Shows the fully assembled small nesting table.

Manufacturer and Importer Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK Representative: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EU Representative: E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.