AGPTEK 3-in-1 Magnetic Wireless Charging Station
Model: FCS-PB13
Introduction
Thank you for purchasing the AGPTEK 3-in-1 Magnetic Wireless Charging Station. For the best user experience, please read this user manual carefully before use and keep it for future reference.
Email: support@agptek.com
For more information, please visit www.agptek.com.
Notes on Compatibility
- This charger supports the Qi 2.0-MPP charging protocol and works with phones, TWS earphones, and Apple Watch that meet Qi 1.0 and Qi 2.0 standards. The maximum power for phone wireless charging is 15W.
- Ensure your device supports Qi 1.0 or Qi 2.0 wireless charging protocols, or has a Qi-standard wireless receiver installed (not included).
- For best performance, use the original charging adapter and USB-C cable that came with your device.
- To use the charger's magnetic attachment feature, your smartphone must have built-in magnetic capabilities or be in a compatible magnetic case.
- This charger's watch module is specifically designed to wirelessly charge iWatch models 9/8/7/6/5/4/3.
Important Safety Instructions
General Precautions
- Use the device only for its intended purpose.
- The product features a built-in damping hinge. You will feel resistance and hear a sound when it reaches a stable angle. Do not force it.
- Keep the device out of reach of babies and children.
- Use the device indoors and in dry areas only. Avoid flammable, explosive, excessively hot, moist, or greasy environments.
- Do not use or place the device in strong magnetic environments.
- Ensure that no objects block the airflow around the charger to prevent overheating.
- Avoid dropping, striking, or applying excessive force to the charger. Stop using it if you notice severe swelling or deformation.
- Do not attempt to disassemble the device yourself.
- Always unplug the device from the wall outlet before cleaning. Disconnect by pulling directly on the plug, not the cable.
- Store the device between -20°C (-4°F) and 60°C (140°F) to ensure its longevity.
- Never throw the product into fire. Dispose of the device following local electronic waste regulations.
- Do not forcefully push the watch charging module forward. Refer to the diagram below for the correct opening direction.
Diagrams showing incorrect vs. correct opening direction are omitted as per instructions, but the text refers to them.
Magnet Safety Precautions
- Maintain a safe distance between the charger and medical devices like pacemakers or implanted defibrillators to avoid magnetic interference. Consult a healthcare provider if you have concerns.
- Prevent placing credit cards, magnetic ID cards, and similar items close to the charger to avoid data loss or damage.
- Keep metallic objects away from the charger to reduce the risk of unintended attachment or short circuits.
Product Overview
The product is a 3-in-1 magnetic wireless charging station. It features distinct areas for charging a phone, TWS earbuds, and an Apple Watch. It also includes a USB-C charging port and an LED indicator light. The device has adjustable angles for optimal placement.
- 1. Phone Charging Area: The primary magnetic charging pad for compatible smartphones.
- 2. TWS Earbuds Charging Area: A dedicated spot for charging wireless earbuds.
- 3. Charging Area for Apple Watch: A specific module designed for Apple Watch charging.
- 4. USB-C Charging Port: The input port for powering the charging station.
- 5. LED Indicator Light: Provides status information about the charging process.
- 6. Recommended Opening Angle: 55°
- 7. Recommended Opening Angle: 110°
How to Use
- Connect the wireless charging station to a power source using the provided adapter and USB-C cable.
- Place your device (Phone, TWS earbuds, or Apple Watch) on the corresponding charging area to start charging.
Specifications
| Model | FCS-PB13 |
|---|---|
| Input | 9V-3A / 12V-2A |
| Output | 15W Max (Phone), 5W (TWS), 3W (Apple Watch) |
| Sensing Distance | 3-6mm |
| Conversion Efficiency | ≥78% |
| Dimensions | 7 x 7 x 3 cm / 2.75 x 2.75 x 1.18 inches |
| Operating Temperature | -20°C (-4°F) to 60°C (140°F) |
LED Indicator Light Guide
- Power On: Blue and red lights flash three times.
- Standby: Light is off.
- Charging: Blue light breathes.
- Fully Charged: Light turns off.
- FOD (Foreign Object Detection): Red light flashes.
Package Contents
- 1 x 3-in-1 Wireless Charging Station
- 1 x 25W Charging Adapter (PD)
- 1 x USB-C Charging Cable
- 1 x Storage Box
- 1 x User Manual
Manufacturer Information
Manufacturer: AGPTEK
Address: 7706 18TH AVE, BROOKLYN, NY, 11214
Email: support@agptek.com
Manufacturing Location: Dongguan Juyuan Precision Technology Co., Ltd., Building B, Central Industrial Zone, Shijie Village Committee, Shijie Town, Dongguan City, Guangdong Province, China, 523305
