HATHASPACE

Specifications

Features: 5-in-1 Purification System

The air purification system consists of five stages:

• Cold Catalyst Filter: Targets and removes large particles like dust mites, pet hair, skin cells, and mold spores. It also aids in decomposing formaldehyde, ammonia, benzene, and TVOCs.
• Activated Carbon Filter: High Grade Active Carbon absorbs smoke, odors, gases, and volatile organic compounds (VOCs). Each filter contains over 300 grams of active carbon for enhanced absorption and longevity.
• Antibacterial Filter: Utilizes nano-materials to target bacteria and germs.
• True HEPA Filter: Removes 99.97% of airborne particles as small as 0.3 microns, including dust mites, pollen, mold spores, and pet dander.
• Ionizer/Anion Generation: Hathaspace's California Air Resources Board (CARB) approved anion feature charges air molecules to eliminate odors, smoke, and gases, and helps capture smaller particles. This can be turned on or off.

Smart Air Quality Sensor

The Smart Air Quality Sensor detects particles and odors in real-time, allowing the purifier to adjust automatically for consistently clean air, reduced power consumption, and lower electricity bills.

Filter Installation

1. Pull the front plate forward to release the magnets and remove the cover.
2. Turn buckles and gently pull out the filter.
3. Remove any packaging film from the filters before use.
4. Place Filter 2 (Antibacterial and HEPA Filter) back into the unit with the tab facing you.
5. Place filter 1 (Cold Catalyst Filter) back into the unit with the tab facing you.
6. Ensure filters are installed correctly with tabs facing you and lock them in place by turning the buckles.
7. Reinstall the front plate by aligning the top into the notches and allowing the bottom magnets to connect. Ensure the front plate is secure before powering on.

Filter Maintenance

Note: To ensure warranty validity and optimal performance, use only certified Hathaspace filters.

Guidelines:

• Replace filters every 4 months for optimal performance.
• Do not clean filters with water or other liquids. Use a keyboard duster to gently remove lint and hair.

Purchasing Additional Air Filters:

• Hathaspace Direct: hathaspace.com/collections/filters
• Amazon: amazon.com/hathaspace

Operation

The included remote control provides full control of the purifier (requires 2 AAA batteries, not included).

• Power On/Off: Plug in the purifier. The red power indicator will light up. Use the Power button on the unit or remote to turn it on/off. The purifier starts in AUTO mode, with the smart sensor automatically initiating. The fan speed adjusts automatically, starting high and then reducing as needed. In AUTO mode, the unit restarts in high mode and gradually adjusts to ensure clean air, adapting in real-time to the air environment.
• Timer: Set the purifier to turn off after a specified time, up to 12 hours. The time interval is displayed on the unit.
• Fan Speed: Adjust fan speed using the Speed button. Higher speeds increase airflow for faster purification. Options include Low (Green), Medium (Orange), High (Red), and AUTO mode, where fan speed adjusts based on air quality.
• Sleep Mode: Press the Sleep button to activate sleep mode. The unit runs at a whisper-quiet speed with the display lights off. The smart sensor also turns off. Press any button to exit sleep mode. To turn off display lights in other modes, press the Light button. Lights will turn back on when the unit is powered off and then on again.
• Ionizer: Press the Anion button to turn on the ionizer. The Anion light will turn green when active.
• Light: Press the Light button to turn the display lights on/off in any fan mode.

Precautions

Read the entire manual thoroughly before use and keep it for future reference.

Hazardous

• To avoid electric shock or fire, ensure the product is dry at all times and keep it away from water or other liquids.

Warning:

1. Ensure your local power supply voltage matches the rating on the machine's nameplate.
2. If the power cord is damaged, do not plug in or turn on the purifier. Contact team@hathaspace.com.
3. Do not block the air inlet or outlet with any objects.
4. For safety, do not allow children to handle the purifier unsupervised.
5. Keep filters away from high temperatures or sparks/flames.
6. This equipment has a polarized plug (one blade wider than the other) for reduced risk of electric shock. It fits a polarized outlet one way. If it does not fit, reverse the plug. If it still does not fit, contact qualified personnel to install a proper outlet. Do not alter the plug.

Notice:

1. Do not use the purifier as a chemical ventilator, dust cleaner, or cooker ventilation hood.
2. Ensure your power outlet is functioning properly.
3. Place the purifier on a dry, stable, and flat surface.
4. Maintain 8 inches of space on either side of the purifier and 12 inches above for proper airflow and efficiency. Containing the purifier in a small space will restrict airflow.
5. Do not place the purifier under an air conditioning unit or where water may drip onto it.
6. Handle the product gently; do not drop or hit it.
7. Do not operate this product while using flammable gas sprays (e.g., insect repellent) or common household cleaning chemicals.
8. Do not use this product near gas appliances, heating devices, or stoves.
9. Unplug the power cord when cleaning or changing filters.
10. Do not operate the purifier in spaces with drastic temperature changes, as this can cause condensation and damage electrical components.
11. This product is intended for household use under normal operating conditions.
12. Do not use this product in high humidity environments like bathrooms with showers, saunas, or steam rooms.

Smart Air Quality Sensor System Memory Reset Instructions:

If the air quality indicator displays red and the machine shuts off suddenly, you may need to reset the memory. Otherwise, the red display may persist.

1. Unplug the machine, wait 15-20 seconds, then plug it back in and start it.
2. Let the machine run for 1 minute. The air quality indicator should function normally.
3. Perform these reset steps in a clean environment without air pollution to avoid disrupting the air quality display lights.

Troubleshooting

For all other questions, email team@hathaspace.com.