MINISO TWS Bluetooth Headphones User Guide
Model: MINISO-207 | FCC ID: 2AEEF-207
Product Overview
This guide provides essential information for using your new MINISO TWS Bluetooth Headphones. Please read carefully and keep for future reference.
We aim to provide the best possible experience for you!
Specifications
- Item No.: MINISO-207
- Bluetooth Version: V5.3
- Speaker: 13mm Dynamic driver, 32Ω ± 15%
- Frequency Response: 20Hz-20KHz
- Audio Output: 105 ±3dB
- Battery: Rechargeable Lithium Polymer
- Earbuds: 40mAh*2
- Charging Case: 300mAh
- Playtime: Earbuds 5.5 hours (60% volume), Case 16.5 hours (Full Battery)
- Input: DC-5V/250mA
- Rapid Charge: 10 minutes charging = 2 hours playtime
- Range: 30+ft
- Protocols: HSP / HFP / A2DP / AVRCP
- Codecs: AAC/SBC
- Weight: 3.4g per earbud, 38.5g (earbuds + charging case)
- IP Rating: IPX4 (earbuds only)
- Includes: Disney Wireless Earbuds, Charging Case, Type-C Charging Cable
User Introduction
First Time Set Up: Bluetooth Pairing
To connect your headphones for the first time:
- Select "MINISO-207" in your device's Bluetooth settings.
- A voice prompt "Connected" will indicate a successful connection.
Visual Aid Description: The image shows two wireless earbuds and a charging case. It also depicts a smartphone screen displaying Bluetooth settings with "MINISO-207" highlighted for connection. Another diagram shows the left and right earbuds, with a label pointing to the touch-sensitive area ? on each earbud.
Easy Operation
Control your music, calls, and voice assistant with simple touch gestures:
- Previous Song: Double tap left/right earbud.
- Next Song: Triple tap left/right earbud.
- Answer Call / Play/Pause: Single tap left/right earbud.
- Reject Incoming Call / Hang Up: Press and hold left/right earbud.
- Access Siri / Google Now: Press and hold left/right earbud for 3 seconds.
Fitting the Earbuds
- Take out the earbuds from the charging case.
- Place the earbud in your ear canal and slightly rotate it to adjust for the best fit.
Visual Aid Description: An illustration shows how to place an earbud in the ear and rotate it for a secure and comfortable fit.
Charging Case LED Indicator
The LED indicator on the charging case provides information about battery status:
Battery Capacity Level (When not charging):
- Blinking Blue: Capacity is 30% or less.
- Steady Blue: Capacity is between 30% and 100%.
Battery Capacity Level (When case is being charged):
- Blinking Red: Capacity is up to 30%-95%.
- Steady Red: Battery is fully charged.
It takes approximately 90 minutes to fully charge the charging case battery.
It takes approximately 90 minutes to fully charge the earbuds' battery.
Earbud Working/Charging Time (Battery Full)
| Feature | Duration |
|---|---|
| Playing Time | 5.5 hours (60% volume) |
| Standby Time | 72 hours |
| Calling Time | 4.5 hours |
| Charging Time | 1.5 hours |
Note: The charging case can fully charge the earbuds approximately 4 times.
Trouble Shooting
No Sound in One Earbud / Earbuds Disconnected From Each Other
- Unpair or ignore "MINISO-207" in your device's Bluetooth settings.
- Take both earbuds out of the charging case. Keep the earbuds within 5cm (approx. 2 inches) of each other.
- Quickly double-tap on any one of the earbuds. A voice prompt "Dong" in both earbuds indicates they have successfully reconnected to each other.
Connection Failure to Bluetooth Device
- Unpair or ignore "MINISO-207" in your device's Bluetooth settings.
- Lock and then unlock your device's Bluetooth.
- Take both earbuds out of the charging case. Listen for the voice prompt "Dong" in both earbuds.
- Re-select "MINISO-207" in your device's Bluetooth settings.
Visual Aid Description: Two smartphone screens labeled 'A' and 'B' are shown, illustrating the process of connecting to "MINISO-207" via Bluetooth.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
