Portable Air Conditioner Owner's Manual

About This Product

This powerful portable air conditioner offers effective cooling for single rooms, creating a comfortable atmosphere. It also features ventilation and dehumidifying functions to circulate air and remove moisture. Designed as a self-contained system, it requires no permanent installation and can be easily moved to where it is most needed. It is ideal for kitchens, temporary residences, computer rooms, garages, and other spaces where outdoor unit installation is limited.

Item NO: A4210L-8K/10K

Applicable models: OL-A010L-05CD/06CD

Key Features

• High capacity in a compact size
• Fan, cooling, and dehumidifying functions
• Temperature setting and display
• LED digital display
• Electronic control with built-in timer and sleep mode
• Self-evaporating system for enhanced efficiency
• Auto shut-off when the tank is full
• Auto re-start after power outages
• Auto defrosting at low ambient temperatures
• Remote control
• 2-speed fan
• Casters for easy mobility

Important Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury, please read this manual carefully and understand all operating instructions before use. Always ensure the unit is operated safely and correctly.

• Allow the unit to stand upright for at least 24 hours before plugging in if it has been tilted.
• Do not operate with wet hands.
• Ensure the unit is placed on a firm, level surface with at least 19 inches of free space around it for proper air circulation.
• Keep air inlets and outlets clear of obstructions.
• Never install the unit near heat sources, direct sunlight, or in areas with excessive dust or poor ventilation.
• Do not use extension cords or adapter plugs.
• Ensure the unit is properly grounded.
• Unplug the power cord before cleaning or when not in use.

Installation Guide

The air conditioner requires venting outside. Follow these steps for proper installation:

1. Connect the hose connector to one end of the exhaust hose.
2. Connect the window kit adapter to the other end of the exhaust hose.
3. Extend the adjustable window kit to fit your window and connect the exhaust hose to it.
4. Secure the window kit in place, using duct tape if necessary, and seal any gaps for maximum efficiency.
5. Attach the hose connector to the exhaust air outlet of the unit.
6. Adjust the length of the flexible exhaust hose, avoiding bends, and place the unit near an electrical outlet.
7. Adjust the air outlet louver and switch on the unit.

Operation Modes

• Cooling: Lowers the room temperature. Adjust temperature and fan speed as needed.
• Ventilating: Circulates air without cooling. Adjust fan speed.
• Drying: Removes moisture from the air. Connect the drain hose to the unit's drain outlet. Fan speed is set to low.
• Sleep Mode: Activates in cool mode, gradually increasing the temperature for comfort.

Maintenance and Care

• Air Filter: Clean the removable air filter every two weeks to maintain efficiency and prevent damage. Rinse under running water and allow to air dry completely before reinstalling.
• Storage: For long-term storage, clean the unit, drain any remaining water, and dry it thoroughly. Store in a dry, well-ventilated area.
• Disposal: Do not dispose of electrical appliances as unsorted municipal waste. Use designated collection facilities and contact local authorities for proper disposal information.

Troubleshooting

Refer to the table for common issues and solutions, including unit not operating, reduced capacity, water leakage, excessive noise, and error codes.

Contact Information

For questions regarding missing parts, damaged products, assembly, or operation, please contact customer service at 213-4467172 or 661-4358826 (8:30 am - 5:30 pm PST). Dated proof of purchase is required for warranty service.

Address: 9733 Topanga Canyon Blvd. APT310, Chatsworth, CA 91311