Aiper Scuba E1 Pool Cleaner User Manual

Welcome

Thank you for choosing Aiper. You are now part of a family of millions who have already trusted Aiper for their pool care and enjoy the convenience of a perfectly clean pool.

This user manual will help you maintain your pool cleaner and ensure its maximum performance for years to come. Please take a few minutes to read this manual.

If you have any questions, please visit our website www.aiper.com and contact the customer service team for assistance or more information.

Aiper Customer Service

Email: service@aiper.com

Facebook: @AiperOfficial

Scan for Video Guide

Scan QR code for Customer Support access

Table of Contents

• Important Safety Precautions

• 1. Structure

• 2. Specifications & Operating Conditions

• 3. Charging

• 4. Using the Aiper Pool Cleaner

• 5. Operating the Device

• 6. Disassembly and Cleaning

• 7. Maintenance

• 8. LED Indicator

• 9. Packing List

• 10. Warranty

Important Safety Precautions

Read this manual carefully and use the device according to the manual's instructions. Aiper is not responsible for any losses or injuries caused by improper use of the device.

Instructions:

1. Do not operate the device when people or animals are in the pool.
2. Ensure the device is turned off when performing maintenance or cleaning, or when not in use.
3. This device is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed on the use of the device by a person responsible for their safety.
4. Children should be supervised to ensure they do not play with the device.
5. Use only the original, approved power adapter.
6. The adapter cable should only be replaced by an authorized electrician.
7. It is recommended to connect the charger to a surge protection device during charging.
8. Ensure the charging port is completely dry before charging the device.
9. During charging, the device should be placed in a cool, well-ventilated area. Customers should not cover the device during charging as it may cause overheating or material malfunction.
10. Do not operate the device out of water, as it may cause material malfunction or overheating.
11. Disassembly of the device's drive kit must be performed exclusively by certified professionals.
12. Do not operate the device while the pool filter is running.
13. Avoid puncturing the motor's oil seal ring as it contains grease. If punctured, a small amount of grease may leak into the pool.
14. Do not store or use the device near anything that generates excessive heat.
15. Do not puncture or strike the device's casing with force, as it will cause irreparable damage. Furthermore, do not drop the device.
16. Do not use third-party batteries. The device can only be used with battery model HYY0345219.
17. This device contains batteries that can only be replaced by qualified personnel.
18. This device contains non-replaceable batteries. When the battery reaches the end of its lifespan, the device must be disposed of properly.
19. Do not expose the device or battery to extreme temperatures.
20. Be aware of the risks of the device's terminals that operate with a battery or battery short circuit from metal objects.
21. Return batteries to recycling professionals. The battery must be removed from the device before disposal. The device must be disconnected from the power supply when the battery is removed. The battery must be disposed of safely.
22. Do not damage the battery during removal to avoid short circuits or liquid leakage. If leakage occurs from the battery, the liquid should not come into contact with skin or clothing and should be wiped immediately with a dry cloth. Then, send the battery to a suitable recycling facility or the designated after-sales service team.

1. Structure

Read this user manual carefully before operating the device.

Handle

Top cover

Extra fine filter

Filter basket

Power button

Bottom roller brush

Bottom wheel

Retrieval hook

Charger

2. Specifications & Operating Conditions

ATTENTION:

Do not use the device in a pool environment with conditions lower than those described below. Doing so may cause damage to the device, which will not be covered by the warranty.

• Temperature: 10-35°C (50-95°F)
• pH level: 7.0-7.4
• Chlorine: Maximum 4 ppm
• Sodium chloride: Maximum 5,000 ppm

3. Charging

CAUTION: Do not charge the device when exposed to direct sunlight.

1. Fully charge the device before using it for pool cleaning.
2. Before charging, remove the charging port cover to check if there is any residual water in the charging port. If so, dry the charging port with a cloth first.
3. Insert the charging cable into the device's charging port and then into an available outlet. The LED indicator on the device will start flashing, indicating that the device is charging. When fully charged, the LED indicator will remain lit.

Image depicting charging process: Device 1 connected to charger, Device 2 charging.

4. Using the Aiper Pool Cleaner

This device is designed for cleaning pools with a flat bottom, without slopes, up to 100 m²/1.100 ft².

Image showing pool dimensions 100 m²/1.100 ft² with device inside.

5. Operating the Device

1. Press and hold the power button for 2 seconds to turn the device on/off.
2. Once activated, the device will rotate the water pump for 1 second every 10 seconds, 3 times in total, to check if it has been placed inside the pool. If the device does not detect water during this process, it will automatically stop operating. The device will start cleaning after touching the bottom of the pool.
3. When the battery level is low, the device will automatically dock in the pool and stop cleaning.
4. Lift the device from the pool bottom using the retrieval hook to avoid getting wet. Users can attach the hook to a standard pool cleaning pole (not included) to extend the hook's length.
5. Attach the retrieval hook to the device's handle and lift it out of the water.
6. Hold the handle and let the device drain any accumulated water.

6. Disassembly and Cleaning

6.1 Cleaning the Filter Basket

1. Place the device in a safe position and remove the top cover. Ensure the device is stable before removing the top cover.
2. With the machine stabilized, lift the top cover to open it.
3. Remove the filter basket by lifting its handle.
4. Press the latch of the filter basket of the top shell and simultaneously pull up the handle of the top cover to open the filter basket.
5. Empty the filter basket, rinse it, and place it back in the device.

6.2 Cleaning the Extra Fine Filter

1. Place the device in a safe position and open the top cover.
2. Next, lift the handle of the extra fine filter frame to remove the extra fine filter assembly from the machine.
3. Remove the extra fine filter from its frame.
4. Place the extra fine filter on the ground and thoroughly rinse the front and then the back with a high-pressure water gun. Ensure all folds and crevices are completely cleaned. After cleaning, let it dry in a cool, ventilated area to prevent mold and prepare it for future use.

Notes:

• Rinse to clean the extra fine filter after each use to prevent debris accumulation and clogging.
• The extra fine filter can trap dust as small as 3 μm. Use it when there are minimally visible debris (such as pebbles, leaves, sand, fragments, and hair) but the water appears cloudy. Avoid using it when there is a large amount of such debris.
• Lift the machine out of the water after cleaning. Then, immediately rinse the extra fine filter to prevent prolonged accumulation of impurities, which makes the cleaning process difficult.
• Neutral detergents can be used for cleaning, but do not scrub the extra fine filter with a brush.
• Extra fine filter replacement schedule: As a consumable, it should be replaced every 4-6 weeks to ensure effective filtering.

7. Maintenance

7.1 Cleaning/Replacing the Bottom Roller Brush

1. Place the device securely with the bottom side facing upwards.
2. Hold the roller brush with one hand and support the machine with the other. Gently press the roller brush downwards as indicated by the arrow in the diagram below, then lift it to remove it.
3. After removing the roller brush, clean any entangled debris and debris remaining in the machine's brush holder.
4. After cleaning, reattach the roller brush. Check that it is correctly installed by holding its center and pulling it outwards. If installed correctly, it should not detach.

7.2 Cleaning/Replacing the Bottom Wheels

If the machine frequently changes direction unexpectedly, it may be due to the immobilization of the bottom wheels. Clean them as described below:

1. Place the device securely with the bottom side facing upwards.
2. Unscrew the bottom wheels.
3. Rinse any debris, sand, or residue from the inner slots of the wheels. Be careful not to lose internal components, such as springs.
4. Reattach the wheels to the machine and ensure they are tightened securely.

7.3 Cleaning the Drainage System

1. Remove the screws and the drainage cover.
2. Remove any objects entangled in the fan blades of the drainage system, then reattach the drainage cover and screws.

8. LED Indicator

9. Packing List

10. Warranty

This product has passed all quality inspections and safety tests conducted by the factory's technical department.

1. This product comes with a warranty covering the battery and motor from the date of purchase. The statutory provisions for warranty terms in the respective country will apply.
2. This warranty is void in case of modification, misuse, or repair of the product by unauthorized personnel.
3. The warranty covers only manufacturing defects and does not cover any damage due to improper handling of the product by the owner.
4. The order number or registration must be presented for any warranty claim or repair during the warranty period.
5. This is an additional warranty provided by AIPER INTELLIGENT SARL., 43-47 avenue de la Grande Armée, 75116 Paris, France. This warranty does not affect the free corrective actions for non-conformity for which the consumer turns to the seller, according to the law.
6. Warranty Email: service@aiper.com

Declaration of Conformity (CE)

Shenzhen Aiper Intelligent Co., Ltd. hereby declares that the product complies with all requirements of the applicable EU Directives 2014/35/EU (Low Voltage Directive), 2014/30/EU (Electromagnetic Compatibility), 2011/65/EU (RoHS). The full text of the Declaration of Conformity is available via the QR code.

The EU Declaration of Conformity can be requested from the following address: AIPER INTELLIGENT SARL, 43-47 avenue de la Grande Armée, 75116 Paris, France.

Image of recycling symbols and instructions.

This symbol indicates that this product should not be treated as household waste. It should be handed over to the appropriate collection point for the recycling of electrical and electronic equipment.