Casio PQ-10, 11, 12, DQ-541, 581, 582, 712 Alarm Clock User Manual
Product Overview
This document is the user manual for the Casio PQ-10, PQ-11, PQ-12, DQ-541, DQ-581, DQ-582, and DQ-712 alarm clocks.
Diagram Description: The diagram shows the front of the Casio alarm clock. It displays the time (e.g., 10:58), indicators for PM, Alarm, and Snooze function. Buttons labeled SNZ/LIGHT are visible. Selector switches are indicated for various modes like TM SET, AL SET, NORMAL, SNZ, AL ON, and AL OFF.
Setting the Time
- Move the selector to the TM SET position.
- Press the HR button to increase the hour value and the MIN button to increase the minute value. Holding down these buttons allows for rapid adjustment.
- Note: Although seconds are not displayed, they reset to 00 when the MIN button is pressed.
- After setting the time, return the selector to the NORMAL position.
Using the Alarm
The special feature of this clock is the snooze function, which allows you to sleep for a few extra minutes in the morning.
Setting the Alarm
- Move the selector to the AL SET position.
- Press the HR button to increase the hour value and the MIN button to increase the minute value. Holding down these buttons allows for rapid adjustment.
- After setting the alarm time, move the selector to the NORMAL position.
Turning the Alarm On and Off
When the selector is in the SNZ or AL ON position, the alarm is active. Moving it to the AL OFF position deactivates the alarm.
Alarm Operation
- Set the alarm time and activate the alarm.
- When the set alarm time is reached, the alarm will sound. The alarm will last for 1 minute unless interrupted by pressing the SNOOZE/LIGHT button.
- After 8 minutes, the alarm will sound again if the SNOOZE/LIGHT button was pressed.
- If the alarm is not turned off (by moving the selector to AL OFF), this cycle will repeat a second and third time.
You can stop the alarm at any time by moving the selector to the AL OFF position.
How to Check the Set Alarm Time
- Move the selector to the NORMAL position.
- Press the HR or MIN button to display the set alarm time.
Alarm Test
- Move the selector to the SNZ or AL ON position.
- Move the selector to the NORMAL position.
- Press the HR or MIN button; the alarm will sound.
Display Backlight
Press the SNOOZE/LIGHT button to illuminate the display.
Battery Replacement
The battery should be replaced when the display becomes dim and difficult to read.
- Lightly press the battery compartment cover, slide it in the indicated direction, and open it.
- Remove both old batteries.
- Insert new batteries. Observe polarity carefully. Incorrect insertion may cause batteries to explode and damage the watch.
- Replace the battery compartment cover.
Specifications
Timekeeping accuracy at normal temperature: +/- 60 seconds per month
Features: Daily alarm with snooze function
Battery life: Approximately 1 year (assuming the alarm sounds for 2 minutes daily and the backlight is used for 2 seconds daily)
Battery Type:
- PQ-10, PQ-11: Two LR-44 type batteries
- PQ-12, DQ-541, DQ-581, DQ-582: Two AAA size batteries (RO3/UM-4 type)
- DQ-712: Two AA size batteries (R6P/SUM-3 type)
Product Information
| Item | Details |
|---|---|
| Name | Electronic / Electro-mechanical quartz wristwatch (Men's/Women's) |
| Brand | CASIO |
| Manufacturer | CASIO COMPUTER Co., Ltd. (CASIO Computer Co., Ltd.) |
| Manufacturer Address | 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan |
| Importer | OOO "Casio", 127055, Moscow, Sushchevskaya St., Bldg. 27, p. 1, Russia |
| Country of Origin | Japan |
| Warranty Period | 1 year |
| Address for Claims | Indicated on the warranty card |
| Compliance | Product complies with GOST 26270-98 (cl.4.35) |
| Certificate of Conformity | No. ROSS JP. AY 46.D00003 |
