Major Tech LED Floodlight Instruction Manual

Introduction

This LED floodlight range is available in various wattages, offering flexible solutions for different lighting requirements. Designed to replace traditional floodlights, the range delivers high lumen outputs across models, ensuring excellent brightness and energy efficiency. Each unit features a durable 4mm strengthened clear glass cover, making it fully weatherproof (IP65 rated) and resistant to harsh environmental conditions. The light source consists of high-power SMD LEDs, which are thermally connected to an aluminium housing to ensure low heat emissions and extended lifespan. Depending on the model, the floodlights offer different IK impact protection ratings and include features such as wide voltage input compatibility and built-in surge protection. Installation must be carried out by a qualified electrical professional.

Installation

If any damage is noticed upon removing the product from the packaging, please return it to Major Tech before attempting installation. These lights must be installed by a qualified electrician. If the light is incorrectly installed by an unqualified individual, Major Tech reserves the right to refuse the return of the product.

Installation Steps

1. Disconnect the power supply before installation.
2. Remove the bracket from the floodlight for ease of installation.
3. Drill 2 holes, place the bracket over the holes and screw into the wall. Please ensure correct installation height (Refer to Specifications table).
4. Reconnect the floodlight to the bracket using the same connections as provided when the light was removed from the packaging.
5. Connect the brown wire to the mains 'Live', the blue wire to 'Neutral', and the yellow and green wire to earth.
6. Confirm connection once installed.

Diagrams illustrating installation steps: Figures 1 and 2 show the mounting bracket being attached to a wall with screws. Figure 3 depicts reconnecting the floodlight to its bracket. Figure 4 illustrates the wiring connections: brown wire to 'Live', blue wire to 'Neutral', and yellow/green wire to 'Earth'.

Maintenance

• Ensure the power is switched off before performing any maintenance.
• Clean the glass regularly using non-abrasive cleaners such as water and mild dishwashing liquid to maintain optimal light output.
• Wipe down the housing with a dry cloth to keep it clean and free of dust.

Multiple Installation Options

Diagrams showing various installation configurations: floodlight mounted on a wall, ceiling, or pole.

Specifications

Contact Information

Major Tech (Pty) Ltd

South Africa

• Website: www.major-tech.com
• Email: sales@major-tech.com

Australia

• Website: www.majortech.com.au
• Email: info@majortech.com.au

The product complies with relevant standards, indicated by the CE certification mark. Please follow local regulations for disposal, indicated by the recycling symbol ♻️.