BEKANT Corner Table Assembly Instructions

Required Tools and Parts Overview

Before starting assembly, ensure you have the necessary tools, which typically include a hammer, spirit level, and screwdriver. The following parts are included:

• Screws (6x, 108490)
• Screws (6x, 130884)
• Screws (9x, 130885)
• Screws (9x, 130887)
• Foot (1x, 111032)
• Bracket (4x, 10002281)
• Screws (4x, 109598)
• Hook (1x, 124325)
• Bolt (2x, 111034)
• Bolt (1x, 100227)
• Bolt (4x, 100178)
• Hex key (1x, 124325)
• Bracket (1x, 121030)

Assembly Steps

Step 1: Place the table top upside down on a soft surface to prevent scratches. Attach the frame components as shown in the diagram.

Step 2: Secure the frame using the provided bolts (111034) and screws (111035). Ensure correct alignment and do not overtighten.

Step 3: Attach the legs to the frame using the specified screws (108490) and bolts (100227).

Step 4: Insert the adjustable feet into the bottom of the legs. Use the hex key (124325) to attach the leg supports to the frame, ensuring they are securely fastened.

Step 5: Repeat the process for the second leg assembly.

Step 6: Attach the table legs to the main frame using the bolts (111035) and the hex key (124325). Ensure the legs are perpendicular to the frame.

Step 7: Continue attaching the remaining legs and supports as indicated in the diagrams.

Step 8: Tighten all connections securely using the provided hex key (124325).

Step 9: Attach the crossbars to the underside of the table top using screws (130885) and (130887).

Step 10: Secure the brackets (10002281) to the frame using screws (109598).

Step 11: Attach the remaining brackets (10002281) in the same manner.

Step 12: Adjust the height of the legs by turning the adjustment screws. Use a spirit level to ensure the table is level.

Step 13: Attach the cable management hooks (124325) to the underside of the table using screws (138687).

Step 14: Ensure all parts are firmly attached and the table is stable.

Step 15: Adjust the leveling feet on the bottom of each leg to ensure the table is stable and level on uneven floors. Use a spirit level to check.

Step 16: Make final height adjustments as needed.

Step 17: To adjust the height, loosen the locking screws on the leg columns using the hex key (121030) and then adjust the height. Retighten the screws to lock the position.

Important Information

• Maximum weight capacity: 100kg.
• Ensure all screws and bolts are tightened properly before use.
• Handle parts with care to avoid damage.
• Assembly is best done with two people.

Product Information

The BEKANT series from IKEA offers functional and stylish furniture solutions for your workspace. This underframe is designed for corner table tops, providing a sturdy and adjustable base.

Brand: IKEA

Product Type: Furniture - Desk Underframe

Model: BEKANT

Article Number: AA-1010073-8