Schneider Electric RM22TR33 3-Phase Control Relay
Product Data Sheet
Main Specifications
| Range of Product | Harmony Control Relays |
| Relay Type | Control relay |
| Product or Component Type | 3-phase control relay |
| Phase | 3 phase |
| Relay name | RM22TR |
| Relay monitored parameters | Overvoltage and undervoltage detection, Phase sequence, Phase failure detection |
| Time delay type | Adjustable 0.1...30 s, +/- 10% of the full scale value (Tt - time delay upon fault) |
| Switching capacity in VA | 2000 VA |
| Measurement range | 380...480 V voltage AC |
| Contacts type and composition | 2 C/O |
Complementary Specifications
| Reset time | 1500 ms at maximum voltage |
| Maximum switching voltage | 250 V AC |
| Minimum switching current | 10 mA 5 V DC |
| Maximum switching current | 8 A AC |
| [Us] Rated Supply Voltage | AC/DC |
| Supply voltage limits | 304...576 V AC |
| operating limits | 20% + 20% Un |
| Power consumption in VA | 15 VA (480 V AC 60 Hz) |
| Voltage detection threshold | < 100 V AC |
| Supply voltage frequency | 50...60 Hz +/- 10% |
| Output contacts | 2 C/O |
| Nominal output current | 8 A |
| Setting accuracy of the switching threshold | +/- 10% of the full scale |
| Switching threshold drift | <= 0.05% per degree centigrade depending permissible ambient air temperature, <= 1% within the supply voltage range |
| Setting accuracy of time delay | +/- 10% of the full scale |
| Time delay drift | <= 0.05% per degree centigrade depending permissible ambient air temperature, <= 1% within the supply voltage range |
| Hysteresis | 2% fixed selectable |
| Run-up delay at power-up | 650 ms |
| Maximum measuring cycle | 150 ms measurement cycle as true RMS value |
| Threshold adjustment voltage | 2...20% of Un selected |
| Voltage range | 380...480 V phase to phase |
| Repeat accuracy | +/- 0.5% input and measurement circuit, +/- 3% time delay |
| Measurement error | < 1% over the whole range with voltage variation, < 0.05 %/°C with temperature variation |
| Response time | <= 300 ms |
| Overvoltage category | III conforming to IEC 60664-1, III conforming to UL 508 |
| Insulation resistance | > 100 MOhm 500 V DC IEC 60255-27 |
| Mounting position | Any position |
| Connections - terminals | Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end; Screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end |
| Tightening torque | 5.3...8.9 lbf.in (0.6...1 N.m) IEC 60947-1 |
| Housing material | Self-extinguishing plastic |
| Status LED | LED (Yellow) relay ON; LED (Green) power ON |
| Mounting support | 35 mm DIN rail conforming to IEC 60715 |
| Electrical durability | 100000 cycles |
| Mechanical durability | 10000000 cycles |
| Utilisation category | AC-15 IEC 60947-5-1, DC-13 IEC 60947-5-1, AC-1 IEC 60947-4-1, DC-1 IEC 60947-4-1 |
| [Un] rated nominal voltage | self-powered |
| Safety reliability data | MTTFd = 388.1 years, B10d = 350000 |
| Contacts material | Cadmium free |
| Control Type | With test button |
| Width | 0.9 in (22.5 mm) |
| Net Weight | 0.20 lb(US) (0.09 kg) |
Environment
| Immunity to microbreaks | 10 ms |
Electromagnetic Compatibility
Immunity for residential, commercial and light-industrial environments conforming to IEC 61000-6-1
Immunity for industrial environments conforming to IEC 61000-6-2
Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
Emission standard for industrial environments conforming to IEC 61000-6-4
Electrostatic discharge - test level: 6 kV level 3 (contact discharge) conforming to IEC 61000-4-2
Electrostatic discharge - test level: 8 kV level 3 (air discharge) conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test - test level: 10 V/m level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 4 kV level 4 (direct) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV level 4 (capacitive coupling) conforming to IEC 61000-4-4
Surge immunity test - test level: 4 kV level 4 (common mode) conforming to IEC 61000-4-5
Surge immunity test - test level: 2 kV level 4 (differential mode) conforming to IEC 61000-4-5
Conducted and radiated emissions class B group 1 conforming to CISPR 11
Conducted and radiated emissions class B conforming to CISPR 22
Standards
IEC 60255-1
Product Certifications
- GL
- CSA
- RCM
- CE
- EAC
- CCC
- UL
Environmental Conditions
| Ambient Air Temperature for Storage | -40...158 °F (-40...70 °C) |
| Ambient air temperature for operation | -4...122 °F (-20...50 °C) 60 Hz; -4...140 °F (-20...60 °C) 50 Hz AC/DC |
| Relative humidity | 93...97% (77...131 °F (25...55 °C)) IEC 60068-2-30 |
| Vibration resistance | 0.075 mm (10...58.1 Hz) not in operation IEC 60068-2-6; 1 gn (10...58.1 Hz) not in operation IEC 60068-2-6; 0.035 mm (58.1...150 Hz) in operation IEC 60068-2-6; 0.5 gn (58.1...150 Hz) in operation IEC 60068-2-6 |
| Shock resistance | 15 gn (11 ms) not in operation IEC 60068-2-27; 5 gn (11 ms) in operation IEC 60068-2-27 |
| IP degree of protection | IP20 (IEC 60529 terminals); IP40 (IEC 60529 housing); IP50 (IEC 60529 front panel) |
| Pollution degree | 3 (IEC 60664-1); 3 (UL 508) |
| Dielectric test voltage | 2.5 kV AC 50 Hz, 1 min (IEC 60255-27) |
Ordering and Shipping Details
| Category | US10CP222380 |
| Discount Schedule | 0CP2 |
| GTIN | 3606480792199 |
| Returnability | Yes |
| Country of origin | ID |
Packing Units
Package 1
| Unit Type | PCE |
| Number of Units in Package | 1 |
| Height | 1.22 in (3.100 cm) |
| Width | 3.46 in (8.800 cm) |
| Length | 3.94 in (10.000 cm) |
| Weight | 3.739 oz (106.000 g) |
Package 2
| Unit Type | S02 |
| Number of Units in Package | 40 |
| Height | 5.91 in (15.000 cm) |
| Width | 11.81 in (30.000 cm) |
| Length | 15.75 in (40.000 cm) |
| Weight | 10.344 lb(US) (4.692 kg) |
Package 3
| Unit Type | P06 |
| Number of Units in Package | 640 |
| Height | 29.53 in (75.000 cm) |
| Width | 23.62 in (60.000 cm) |
| Length | 31.50 in (80.000 cm) |
| Weight | 178.707 lb(US) (81.060 kg) |
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via our ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
Environmental footprint
| Carbon footprint (kg CO2 eq, Total Life cycle) | 95 |
Materials and Substances
| Packaging made with recycled cardboard | Yes |
| Packaging without single use plastic | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| SCIP Number | 3c095d35-159c-493c-8604-58788d456aa9 |
| REACH Regulation | REACH Declaration |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Repack and remanufacture
| Take-back | No |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Dimensions Drawings
Dimensions
Side view:
Height: 79.5 mm (3.13 in.)
Front view:
Width: 22.5 mm (0.89 in.)
Depth: 90 mm (3.54 in.)
Mounting and Clearance
Rail Mounting
Depth: 83.5 mm (3.29 in.)
Height: 80 mm (3.15 in.)
Connections and Schema
3-Phase Voltage Control Relay
Wiring Diagram
Legend:
- L1, L2, L3: Supply to be monitored
- 11-14, 12: 1st C/O contact of output relay
- 21-24, 22: 2nd C/O contact of output relay
Technical Description
Function Diagrams
Phase Failure Detection (U measured < 0.7 x nominal supply voltage)
Diagram showing voltage levels over time with phase failure detection.
Control of Overvoltage and Undervoltage
Diagram showing voltage levels, thresholds, and hysteresis over time.
Legend:
- Un: Nominal supply voltage
- R: Output relay
- Tt: Overvoltage and undervoltage threshold delay (adjustable on front panel from 0.3 to 30 s)
- H: Hysteresis
- U>: Overvoltage threshold
- U<: Undervoltage threshold
- L1, L2, L3: Phases of the supply voltage monitored
- 11-12, 11-14: R1 output relay connections
- Relay status: black color = energized.
Technical Illustration
Dimensions
Side view:
Height: 79.5 mm (3.13 in.)
Front view:
Width: 22.5 mm (0.89 in.)
Depth: 90 mm (3.54 in.)
Offer Marketing Illustration
Product benefits / Features
Features
Harmony Control Relay
- Wide monitoring parameters (phase, current, voltage, liquid level, frequency, speed, temperature, and pump control) to meet your application needs.
- Experience unprecedented accuracy, predictive maintenance, and superior security.
- True RMS measurement that minimizes the possibility of unexpected trips from highly polluted networks (except RM17TG and RM22TG).
- Green Premium labelled products, promising compliance with the latest regulations, transparency on environmental impacts, as well as circular and low-CO₂ product.
- Compatible with a wide range of applications, such as hoisting, packaging, lifts, textile, pumping, and water.
Technical Benefits
Harmony Control Relay
- Compliant with IEC 60255-1 standard, and a wide array of product certifications such as UL, CE, CSA, EAC.
- Different product width to meet your needs: 17.5 mm/0.69 in., 22.5 mm/0.88 in., 35 mm/1.38 in.
- Dust and unintended human intervention avoided thanks to the IP50 lead-sealable settings protection cover.
- Diagnostic button to check downstream circuit immediately, shorten the commissioning and troubleshooting time.
- A Dial-Pointer LED indicator that enhances ease of operation in difficult environments such as dusty or low-light conditions.
Image of product / Alternate images
Alternative
Images of the RM22TR33 control relay from different angles.
Related Documents
 |
Schneider Electric Harmony Control Relays RM22TU21: 3-Phase Undervoltage Detection Data Sheet Detailed technical specifications for the Schneider Electric Harmony Control Relays RM22TU21, a 3-phase control relay with 8A, 2CO, and undervoltage detection, operating at 200-240V AC. |
 |
Schneider Electric Harmony Control Relays RM22TA33 Data Sheet Detailed product data sheet for the Schneider Electric Harmony Control Relays RM22TA33, a 3-phase control relay with 2 CO contacts, 5A rating, and a voltage range of 380-480V AC. Includes specifications, dimensions, wiring diagrams, and environmental data. |
 |
Schneider Electric Harmony 3 Phase Control Relay Product Information Comprehensive guide detailing the features, specifications, installation, and operation of Schneider Electric Harmony 3 Phase Control Relays, including models RM17, RM22, and RM35. Covers safety, connection examples, setting parameters, function diagrams, LED indications, and diagnostic functions. |
 |
Schneider Electric RM22TU23 3-Phase Control Relay Data Sheet Detailed product data sheet for the Schneider Electric Harmony Control Relays RM22TU23, a 3-phase control relay with undervoltage detection, 8A rating, and 2 C/O contacts. |
 |
Schneider Electric RM22TG20 3-Phase Control Relay Datasheet Technical datasheet for the Schneider Electric RM22TG20 3-Phase Control Relay, detailing its main characteristics, complementary features, environmental specifications, and dimensions. |
 |
Schneider Electric RM22TR31 3-Phase Voltage Control Relay Data Sheet Detailed product data sheet for the Schneider Electric Harmony Control Relay RM22TR31, featuring overvoltage and undervoltage detection, specifications, dimensions, and environmental data. |
 |
Schneider Electric Harmony 3 Phase Control Relay RM17, RM22, RM35 Datasheet Detailed datasheet for Schneider Electric Harmony 3-phase control relays (RM17, RM22, RM35 series). Covers product features, dimensions, safety information, installation, connection examples, setting examples, function diagrams, LED indications, and diagnostics. |
 |
Harmony Control Relay Application Guide: Features, Applications, and Selection Comprehensive guide to Schneider Electric's Harmony Control Relays, detailing their features, applications in motor protection, pump control, liquid level monitoring, and more, along with product selection and technical terminologies. |