COOSPO H808S User Manual

Standard Accessories

• Heart Rate Monitor x 1 (CR2032 battery installed)
• Chest Strap x 1
• User Manual x 1

Product Introduction

The H808S transmits real-time heart rate data through Bluetooth or ANT+ to heart rate receiving devices, sports, and health apps, aiding in scientific exercise intensity management. This manual provides guidance for optimal product use. Please retain it for future reference.

Note: This product is intended for sports purposes only and is not a substitute for any medical device.

Function and Operation

Wearing the Heart Rate Monitor

Attention: Ensure the heart rate monitor is worn before attempting to pair it with your phone. If not worn, it will be in sleep mode and undetectable via Bluetooth.

1. Moisten the electrode areas of the chest strap.
2. Attach the heart rate monitor to the chest strap, ensuring the 'L' marking is towards the left.
3. Adjust the chest strap length for a snug yet comfortable fit against your body. Confirm that the moistened electrode areas are in firm contact with your skin and the front of the monitor is centrally and uprightly positioned.
4. When two "beep" sounds are heard and the LED flashes green, it indicates the heart rate sensor is correctly worn and detecting a heart rate signal.

Connect to the App

Turning on Bluetooth:

1. Navigate to Settings and toggle Bluetooth to the ON position.
2. Do not search for or attempt to pair the device on this screen; simply turn on Bluetooth and proceed to the Fitness App.
3. Start the App and connect with the device within the App.
4. When the device is pairing with the App via Bluetooth, the blue light will begin to flash.
5. When the heart rate monitor is removed, a "beep" will be heard, signaling that the product has stopped functioning.

Connecting with ANT+ Watch

1. Refer to the 'Wearing the Heart Rate Monitor' section on the first page for correct wear.
2. Locate and add the H808S in the ANT+ device list.
3. Follow the prompts on the watch to commence training and view real-time heart rate data on the display.

Note: When the heart rate monitor is removed, a "beep" will be heard, indicating the product stops working.

Maintenance

The H808S is a sophisticated electronic device. Adhering to the product's care instructions will ensure its stability and extend its service life.

Heart Rate Monitor

• Detach the connector from the strap after each use and dry the connector with a soft towel. Avoid using cleaning chemicals.

Chest Strap

• Rinse the strap under running water and hang it to dry after each use. Washing or drying the strap in a washing machine or dryer is strictly prohibited.
• Never use cleaning chemicals, as they can accelerate strap aging and reduce its service life.
• Do not stretch the strap or sharply bend the electrode areas.
• Store the heart rate monitor in a cool, dry environment. Avoid storing it in a wet or airtight environment to prevent oxidation.

Battery Replacement

If the device becomes undetectable, consider replacing the battery.

1. Use a coin to engage the groove, rotate it in the OPEN direction, and open the battery door.
2. Remove the old battery and dispose of it properly according to local environmental regulations.
3. Insert the new battery into the battery compartment with the positive (+) terminal facing upwards. Use a coin to rotate the battery door in the reverse direction of OPEN until it is securely closed.

To prevent danger, keep batteries away from children.

Specifications

Applicable Smart Phones

• iOS 7.0 or above, iPhone 4s model or above
• Android 4.3 or above with Bluetooth 4.0

Compatible Apps

CoospoRide, Wahoo Fitness, Zwift, Openrider, Runkeeper, Endomondo, Nike+ Run Club, Sports Tracker, Polar Beat, Apple Health, or other Apps with heart rate display features.

Note: When using Nike+ Run Club, please refer to the App's running settings for displaying heart rate data.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Warning

This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.