DUALTRON VICTOR LIMITED Personal Mobility PRODUCT MANUAL

Product Overview

This manual provides comprehensive information for the Dualtron Victor Limited electric scooter, a personal mobility device designed for efficient and enjoyable transportation. It covers various aspects from initial setup to riding and maintenance.

Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions.

The pictures shown are for illustration purposes only. Actual product may vary.

Diagram and Functions

The Dualtron Victor Limited features a range of components and controls:

• Components: EY4 display, Front brake lever, Handle post (Steering tube), Horn, Locking slide, Running headlight, Front suspension, Front fender, Front motor, 10-inch wide tube tire, Front arm, Rubber deck, Spoiler/Footrest with light, Rear fender, Rear brake, Disc, Kick stand, Charging port.
• Multiswitch Controls:
  • Turn Signal Button: Press the left/right side to activate turn signals. They will blink until pressed again.
  • Headlight Button: Press to turn the headlight on or off.
  • Horn Button: Press to activate the horn.
  • Ambient Light Button: Press to turn the ambient lighting on or off.
  • Warning Light Button: Press to activate hazard lights (left and right signals blinking simultaneously). Press again to deactivate.
  • Motor System Selection Button: Switch between SINGLE and DUAL drive modes.
  • Accelerator: Pull the throttle to increase speed.

Specifications

Product

• Model: Dualtron Victor Limited
• Battery Capacity: 60V28Ah CN / 60V35Ah Samsung
• Range: 90km / 110km
• Charging Ambient Temperature: 0 to 40°C (BMS protection activates above 55°C)
• Battery Management System: Over-heating, short circuit, over-current, over-discharge, and over-charge protection.
• Max. load: 120kg
• Recommended Age: 16-60 years old
• Required Height: 3'11" - 6'6" (120-200 cm)

Display

• Type: EY4 LCD Bluetooth Display (Connects to DUALTRON APP)

Motor

• Motor Type: BLDC Hub Motor
• Nominal Power: 1300W*2

Machine

• Net Weight: 39.1kg
• Max. Slope: Around 70% (35°)
• Drive System: Single/ Dual drive
• Speed: 25km/h
• Dimensions (L x W x H): 1230x600x1300mm
• Folded Dimensions (L x W x H): 1230x260x560mm
• Wheelbase: Approx. 970mm
• Ground Clearance: Approx. 140mm
• Traversable Terrain: Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
• Operating Temperature: -5 to 45°C
• Storage Temperature: -20 to 50°C

Brake

• Machine Brake: Nutt Hydraulic Brake
• Electric Brake: ABS&EBS (Protection program activates at battery temperatures exceeding 55°C)

Charger

• Input Voltage: 100-120V/200-240V~
• Max. Output Voltage: 66.4V 1.7A

Tire

• Type: 10x3.0-6.5 tubeless tire
• Tire Pressure: 50 psi
• Material: Rubber

Suspension

• Type: F&R suspension cartridge (replaceable)
• Optional Settings: Softest, Medium soft, Medium, Medium hard, Hardest

Disclaimer: This information is for convenience and informational purposes only and does not constitute legal advice. Dualtron disclaims all warranties related to completeness and accuracy. Users are responsible for understanding and complying with all applicable laws and regulations.

*Theoretical Range: Tested with a full battery, 75kg load, 25°C, at 25 km/h on pavement.

*Typical Range: Tested with a full battery, 75kg load, 25°C, at 50 km/h on pavement. Factors affecting range include speed, starts/stops, and ambient temperature.

*Max. Speed: Tested with a full battery, 75kg load, 25°C, on a straight, flat road with no wind. Environmental factors like uneven roads, temperature, and wind can affect max speed.

Packing List

Accessories Included:

• Battery charger x 1
• Multitool x 1
• Manual

Assembly

Follow these steps for assembly:

1. Raise the steering tube: Ensure the folding latch engages correctly. Failure to do so may cause the steering tube to detach unexpectedly, leading to damage.
2. Tighten the folding mechanism: Press down the quick release lever firmly to secure the folding mechanism.
3. Check the safety button: Ensure the safety button is in its proper position.
4. Attach the handlebars: Lift the handles, slide the hoops, and secure the handles using the quick releases.

Bluetooth Connection

APP Download Guide

1. Scan the QR code to download the DUALTRON app.

2. Choose the appropriate mobile phone system (iOS or Android) to install the app and complete registration/login.

Connecting the Scooter:

• Power on the scooter.
• Open the DUALTRON app and click "Search vehicle" to pair with your scooter. The Bluetooth symbol will light up when connected.
• Select "Bind as owner" to ensure only authorized users can connect. Authorizations are managed within the app.

How to Ride

1. Power On and Mode Selection: Power on the scooter and select the desired speed mode. Note: Speed modes can also be adjusted via the DUALTRON app.
2. Starting to Glide: Stand on the footboard with one foot and push off with the other to begin gliding. Ensure SAFE mode is deactivated (this can be done via the DUALTRON app or by squeezing the brake lever).
3. Stable Riding: Place both feet on the footboard and stand stably. Pull the throttle to accelerate.
4. Slowing Down: Release the throttle and squeeze the brake levers to slow down.
5. Turning: Shift your body weight and slightly turn the handlebar. Be mindful of road conditions and ensure adequate turning space.

Important Safety Note: Hard braking can lead to serious danger or injury. Maintain a moderate speed and be aware of potential hazards.

Folding

Follow these steps to fold the scooter:

• Fold Handlebars: Fold the handlebars and slide the folding handle lock out of position to release them.
• Fold Steering Tube: Press both folding latches and then fold the steering tube. Ensure you hold the steering tube with your hand while pressing the safety latch to prevent it from falling and causing injury.
• Secure Folding: Slide the safety button up and open the quick release lever.
• Lock Handlebar Hook: Lock the handlebar hook to the footrest. Ensure the handlebar is locked when lifting the scooter.