Midea Air Cooler

IMPORTANT SAFETY INSTRUCTIONS

Caution Read Rules for Safe Operation and Instructions Carefully.

WARNING

1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
2. Household and indoor use only.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
4. Unplug the appliance during filling and cleaning.
5. Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
6. Non-specialized personnel or unauthorized repair personnel shall not repair or modify the machine.
7. It is forbidden to operate with wet hands to avoid electric shock.
8. If the unit is not in use for a long time, unplug the power cord.
9. To prevent accidental injury or damage to the unit, please do not insert any foreign matter into the air inlet and outlet, because the unit incorporates a high-speed wind rotor.
10. It is prohibited to use this unit in environments with flammable and explosive gases, and direct sunlight for a long period shall be avoided.
11. Do not place this unit in an inclined or other uneven place to prevent the unit from falling and causing damage to the unit or internal parts.
12. This machine has a safety switch. If the honeycomb filter support has not been installed well, the unit will not work as usual; when the machine is working, do not remove the honeycomb filter frame.
13. At any time, the water level in the tank shall not exceed "MAX" (maximum) scale, and during humidification, the total water level in the tank shall be controlled and shall not be below "MIN" (minimum) scale.
14. After the water tank is filled with water, do not tilt or collide with the unit when placing or moving it. To move the unit body, please drive it slowly from the side to prevent water overflow.
15. In using the unit, prohibit overturning to avoid any accident. If the unit topples over accidentally and it contains water, unplug the power cord immediately and take it to a repair store.
16. Do not place items on the unit, and covering the outlet is strictly prohibited.
17. When washing the unit appearance, apply a damp cloth (or add a little cleaning agent) to wipe, and never use corrosive cleaning agent or solvent for cleaning. Never rinse the unit with water.
18. Do not have the air inlet and outlet of the unit close to walls, curtains, and other objects, or they may block the airflow and affect air supply.
19. When the unit is running, do not knock at or shock the unit body forcibly, or it may lead to automatic shutdown; in which case, simply restart the unit.
20. In summer, the water in the tank may easily deteriorate and generate odor; please pay attention to regular change of water. If the indoor temperature is below zero in winter humidification, it is best to use warm water for humidification.
21. Do not place the unit directly below the power outlet.
22. Do not use the unit around the tub, sprinkler, or swimming pool.
23. Product repair must be carried out in a designated agency.
24. To protect against the risk of electrical shock, do not immerse the unit, cord, or plug in water or other liquid.
25. Use a soft cloth moistened with mild soap, and then use a dry cloth to wipe it again.
26. Be aware that high humidity levels may encourage the growth of biological organisms in the Environment.
27. Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.

PRODUCT INTRODUCTION

Notice Pictures in the manual are for reference only, and real objects within the packaging box will prevail in the end.

Parts name

• Control part
• Water tank buckles
• Water tank
• Wet curtain
• Ice crystal box (The ice crystal box is a random gift)

INSTRUCTIONS

Guidance on feeding water and disassemble & washing of the water tank

Notice

• Please clean up water accumulated at the bottom of the water tank in a timely manner when the product is left unused.
• Please remove the power plug when feeding water and cleaning.
• Please make sure that the water pump module is fixed in position before startup. Random displacement of the water pump module can cause abnormalities in the product's cool wind function.

Two ways for feeding water:

1. Pull out half of the water tank, and feed water directly without disassembling the water pump module.
2. Separate water pump module, and fully pull out the water tank, to feed water or clean the water tank.

Step-by-step guide for water tank operations:

1. Pull the water tank buckle to the horizontal state.
2. Pull out the water tank to the position as shown in the figure (push the water tank inside after feeding water).
3. Unscrew the rotary knob in "—" shape manually (90° anticlockwise) to separate the water tank from the water pump module (including the water pipe).
4. Pull out the water tank slowly to clean it up or feed water.
5. After feeding water or cleaning the water tank, install the water pump module in the water tank. Insert the front hook into the slot of the water tank, and then rotate the rotary knob in "—" shape clockwise for 90°, and close it as shown in the figure.
6. Push the water tank inside slowly, and stir the water tank buckle to lock it up.

Usage of the ice crystal box

Notice

• The ice crystal box can be frozen repeatedly and recycled; you can also choose not to use it based on the temperature.
• Please keep the ice crystal box closed to prevent damage and liquid leakage.
• The ice crystal box is made of eco-friendly and toxic-free materials and can be refrigerated safely.
• When using the frozen ice crystal box in the water tank, the temperature at the air outlet will drop after operating the cool wind function.
• Ice blocks can be used to replace the frozen ice crystal box to exert the same cooling effect.
• Control the water level of the water tank to be lower than the "max" (maximum) indicating scale when feeding water. If the water level is lower than "min" (minimum) indicating scale, please feed water in time.

Instructions for ice crystal box usage:

1. Pull out half of the water tank below the machine.
2. Take the ice crystal box out of the package and place it inside a refrigerator to freeze for more than 3 hours. Put the frozen ice crystal box in the water tank, and feed water below the "max" (maximum) indicating scale.

INSTRUCTIONS

Operating instructions of the machine body

Display area

Control area

INSTRUCTIONS

Remote control button description

Notice

• The remote control should be normally used within 5 meters of the front of the product and 30 degrees of the deviation angle.
• The battery contains many heavy metals, acids, and bases, etc., which may threaten human health; waste batteries should be recycled separately.

Remote Control Buttons:

• Open/stop air swing
• Set wind type
• Open/close cool wind
• Startup/Standby
• '+' indicates accelerating wind speed
• '-' indicates decreasing wind speed
• Set the timed shutdown/ reserved startup

Battery Information: AAA Battery, 1.5 V. Use manganese or alkaline batteries of type "AAA". DO not use rechargeable batteries.

Note: Both machine body operation "?️" and remote control "?️" are buttons of wind type; Both machine body operation "❄️" and remote control "❄️" are buttons of cool wind;

CLEANING AND MAINTENANCE

Guidance on the disassembly and installation of wet curtain parts

1. Remove the wet curtain support.
2. Rotate the bottom buckle at first, and then remove the wet curtain.
3. Take out the wet curtain for cleaning.
4. Install wet curtain support.

Replace water

After stopping the cool wind function for 2 minutes, it's applicable to pull out the water tank to replace water, as water in the pipeline and wet curtain flows back to the water tank. [Stop the cool wind function for 2 minutes.]

SERVICE GUIDE

Troubleshooting

Please check the following points before asking others for inspection or maintenance.

MAINTENANCE INSTRUCTION

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed.

1. Before cleaning and assembling, the fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly remove soap film with dry cloth.