Midea 5.7L Air Cooler

Safety Instructions

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Unplug the appliance during filling and cleaning.
• Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
• [recycling-symbol] This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Installation Instructions

Name of Components

The air cooler unit features a main body with front vents, a water tank at the base, and wheels for mobility. Key components labeled include the water tank cover, water tank, honeycomb filter, and an ice box.

Foot-Wheel Installation

The diagram illustrates the underside of the air cooler, showing the attachment points for the front and rear foot-wheels.

Instructions for Use

Instructions for Operation

The control panel features several buttons: OFF, LOW, MED, HIGH, OSC. (Oscillation), and EVA./COOLER. Pressing these buttons activates or deactivates corresponding functions.

• [OFF] Key: Activates or deactivates the OFF function.
• [LOW], [MED], [HIGH] Keys: Adjust fan speed.
• [OSC.] Key: Activates or deactivates the Swing function.
• [EVA./COOLER] Key: Activates or deactivates the EVA/COOLER function.

Please Note: Buttons on the unit may differ based on the actual product model.

Using the Ice Box

The ice box is designed to be filled with water and ice for enhanced cooling. A 'Water Level' indicator is present. When humidifying, ensure the water level in the Water Tank remains under the MAX indication. Replenish water if the level drops below the MIN indication.

Guidelines for Water Filling and Cleaning of Water Tanks

• Please unplug the power plug when adding water and cleaning.
• Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly remove soap film with a dry cloth.
• Before starting up, ensure the pump module is fixed in place. If the pump module is placed incorrectly, the unit may not work properly.

Ways to Add Water

There are two methods for adding water:

1. Drain half the water tank (with the pump module still attached), then add water directly.
2. After detaching the pump module, use it to add water to or clean the water tank.

Water Tank Handling Steps

1. Push the water tank button out to a horizontal state.
2. Carefully pull out half of the tank; the water tank can be pushed back after adding water.
3. Turn the knob by hand (90° counterclockwise). Separate the water tank from the pump module (including the pipe).
4. After slowly pulling out the water tank, clean it and add water.
5. After cleaning and adding water, push the water tank back into place, fix the pump module, and lock the water tank with the knob.

Maintenance Instruction

The Air Cooler requires minimal maintenance. Do not attempt to repair it yourself; refer to qualified service personnel if service is needed.

• Before cleaning and assembling, the air cooler must be unplugged.
• To ensure sufficient air supply, the honeycomb filter and dust filter should be cleaned regularly.
• Wipe the exterior parts with a soft cloth and mild detergent.
• Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use gasoline or thinner as a cleaner.
• Do not allow water or any other liquid into the motor housing or interior parts.