Energizer Smart 5GHz WiFi Foldable Privacy Camera
QUICK START GUIDE
Model: EIX1-1006
GETTING STARTED
Thank you for choosing the Energizer Smart Camera. This quick start guide will help you with setup and installation.
Estimated Setup Time: 5-10 minutes
Package Includes:
- Smart Privacy Camera
- 6ft Cable
- USB Power Adapter
- Quick Start Guide
- Double Sided Tape
What You Need:
- Energizer Connect App
- 2.4GHz or 5GHz WiFi
Before setup, make sure your phone is connected to the 2.4GHz WiFi network that your device will be placed on.
CONNECT THE DEVICE
STEP 1
Download the free Energizer Connect app from the App Store (for iPhones) or Google Play Store (for Android phones).
STEP 2
Make sure your mobile device is connected to your WiFi network. Open the app and click "Create Account" by following the on-screen instructions.
After your initial sign in, your app will remember your password and log you in automatically. You can also choose to manually log out under Settings in the Main menu.
Verification Code: You may need to check your Spam folder for the verification code.
STEP 3
Plug the camera into a wall outlet using the provided cable and USB power adapter. The indicator light on the camera should start blinking RED for pairing mode. The camera will also make a chime sound, letting you know it has started up.
Indicator Light Status:
Red Blinking: Pairing Mode
Red Solid: Starting Up
Blue Blinking: Attempting to Pair
Blue Solid: Connected
Reset: If the LED is not blinking, then you are not in pairing mode. Reset the camera by using your finger to hold down the reset button for 5 seconds until you hear the camera make a chime sound.
Hold down for 5 seconds
Tip: If you would like to install a micro SD card, insert it as shown with the gold pins facing the reset button.
(micro SD card not included)
STEP 4
After logging in, click "+" on the top right of the screen and select "Add device".
STEP 5
Select the Camera category and confirm the indicator light is still blinking red. Click "Next Step".
Tip: If you don't hear the prompt, try pairing using EZ mode. See troubleshooting on page 10.
STEP 6
Confirm that the displayed WiFi network is your 2.4GHz WiFi or 5GHz network, enter your WiFi password and click "Confirm".
2.4GHz 5GHz
Enter Wi-Fi Password
[Password input field]
STEP 7
On the next screen, a QR Code will appear. Position your camera to scan this QR code on your phone. Click "Continue" when you are ready.
Touch the lens of the camera directly against the QR code on your phone and slowly move the camera away.
Beep!
Once you hear an audible prompt from the camera, click the "I Heard a Prompt" button.
LEGAL & WARRANTY
For detailed warranty information, please refer to the Energizer Connect app or visit the Energizer website.
TROUBLESHOOTING
Having Trouble with Setup?
If you encounter issues during setup, please consult the troubleshooting section within the Energizer Connect app or refer to the full user manual for detailed guidance.
For further assistance, visit [Energizer Support Website Link] or contact Energizer customer support.
