Gol Pumps Technology
Data Sheet: Magnet Pump GMD-100 R
- Gol Pumps Technology INC
- Website: www.golpumps.us
- Website: www.golpumps.com
- Email: info@golpumps.com
Pump Data
| Brand: | GOL PUMPS | ||
| Model: | GMD - 100 R | ||
| Head Rate: | 31 FEET | Flow Rate: | 14.6 GPM |
| Head Min: | 8.3 FEET | Flow Max: | 31.7 GPM |
| Head Max: | 36.7 FEET | Flow Min: | 9.77 GPM |
| RPM: | 3450 rpm | ||
| Normal Power P2: | 0.34 HP | ||
| Fluid: | Water | ||
| Fluid Temperature: | at about 32 °F - 176 °F | ||
| Density: | water 1.2 kg/Dm³ = 2.65 lb | ||
| Fluid Viscosity: | 8.90 × 10⁻⁴ Pa·s | ||
| Kind of Workiny: | Horizontal | ||
| Delivery size: | 26 mm 1" (hose) | ||
| Suction size: | 26 mm 1" (hose) | ||
| Made in: | CHINA |
Motor Data
| Power P2: | 0.260 Kw |
| Power P1: | 0.365 Kw |
| Phase (PH): | 1 |
| Rate Voltage: | 115 V |
| Capacitor Need: | 6 µF/V |
| Frequency: | 60 Hz |
| Rated Speed (rpm): | 3450 rpm |
| Current (A): | 1.3 A |
| Cos Φ: | 0.95 |
| Degree of Protection (IP): | IP 55 |
| Safety Protection Degree: | E |
| Safety Protection Included: | Thermal Protector |
| Length of Cable: | 2 M |
| Kind of Plug: | NONE |
| Ambient Temp: | 40°C = 104°F |
Other Pump Data
| Pressuer Rating: | PN 6 |
| Min. Fluid Temp: | 0°C = 32°F |
| Max. Fluid Temp: | 80°C = 176°F |
| Ambient Temp: | 40°C = 104°F |
| Liquid Density: | 1.2 kg/Dm³ = 2.65 lb |
Special Specification
| Installation status: | Horizontal |
| Variable frequency: | NONE |
| Solid Passage: | * |
Materials
| Pump Casing: | PP |
| Rear Cover: | PP |
| Impeller: | PP |
| O-rings: | FXM |
| Rotation Bushings: | Silicon Carbide |
| Stationary Bushings: | Aluminum Oxid |
| Outer cover: | PP |
| Motor Case: | Aluminum |
Weight: 7.8 Kg
Standard Approve: CE Marking
Revision: 2021/02
Performance Curve
The performance curve illustrates the relationship between Head (H) in meters (m) and Flow Rate (Q) in Liters per minute (L/min) at 60Hz. Two curves are shown, labeled "70R" and "100R", indicating different performance characteristics. The graph features a grid with Head values from 0 to 14 meters on the Y-axis and Flow Rate values from 0 to 120 L/min on the X-axis.
Product Image
A visual representation of the Gol Pumps GMD-100 R magnet pump. It features a green motor housing with a black pump head assembly. The pump has inlet and outlet ports and is mounted on a base for stability.
Component Breakdown
An exploded view diagram shows the assembly of the pump head. Key components identified include:
- Motor (AL)
- Drive Magnet (PP)
- Inside Driven Magnet (PP)
- Impeller (PP)
- Rear Cover (PP)
- Casing O-Ring
- Silicon Bush
- Liner ring (Aluminum) oxid
- Aluminum oxid shaft
- Front Casing (PP)
- Silicon Washer
Dimensional Drawings
The document includes three views of the pump for dimensional reference:
Side View: Shows the overall length (L), height (H), and width (W) of the pump, with specific dimensions labeled 'a', 'b', 'c', 'd', 'e', 'f', 'g'.
Front View: Displays the motor's fan cover and mounting base, with dimensions labeled 'c' and 'W'.
Rear View: Highlights the motor casing and mounting points, showing overall height (175 mm) and width (156 mm), with specific dimensions like 110 mm and 43.5 mm.
Dimensions Table:
| Dimension | in | mm |
|---|---|---|
| A | 70 | |
| B | 100 | |
| C | 110 | |
| D | 75 | |
| E | 64.8 | |
| F | 43.5 | |
| G | 146.8 | |
| W | 156 | |
| H | 176 | |
| L | 321.8 |
Applicant Information
This pump is suitable for handling the following fluids:
- Corrosive Acids, Alkalis, Solvents, Brines
- Plating Solutions
- Sterile Solutions
- Other Mildly Corrosive Chemicals and Solutions that are Compatible with the Pump's Material of Construction
