Kerbl Barney Chicken Coop Assembly Instructions

Model: BARNEY #81731

Parts List

The following parts are included in the kit:

Part 1 X 1
Part 2 X 1
Part 3 X 1
Part 4 X 1
Part 5 X 1
Part 6 X 1
Part 7 X 1
Part 8 X 2
Part 9 X 1
Part 10 X 1
Part 11 X 1
Part 12 X 1
Part 13 X 1
Part 14 X 1
Part 15 X 1
Part 16 X 1
A X 2
B X 1
C X 14
D X 18
E X 2
F X 1
G X 1
H X 1
I X 1

Assembly Steps

Follow these steps to assemble your Kerbl Barney chicken coop:

Step 1

Attach part E to part D. Use 3x D screws to secure part 2 to part 1.

Visual description: A close-up shows a screw (D) passing through a washer (E) and into a pre-drilled hole. The main diagram shows the base of the coop being formed with two side panels (labeled 1 and 2) being attached to the base supports.

Step 2

Attach part E to part D. Use 3x D screws to secure part 3 to the structure formed in Step 1. Ensure part 2 is aligned with the markings.

Visual description: Similar to Step 1, showing screw (D) and washer (E). The main diagram shows a third panel (labeled 3) being attached to the existing structure, with markings indicating alignment.

Step 3

Attach part E to part D. Use 3x D screws to secure part 4 to the structure. Use another 3x D screws to secure part 4 to the other side.

Visual description: Shows screw (D) and washer (E). The main diagram illustrates attaching panel 4, which has a window, to the coop structure using screws.

Step 4

Use 2x A screws to attach part 2 to the top of the coop structure.

Visual description: Shows screws labeled 'A'. The diagram shows two long screws being inserted into the top of the coop, connecting to panel 2.

Step 5

Insert part 6 into the designated slots on part 2. Then, insert part 5 into the slots on part 4.

Visual description: The diagram shows two long, thin pieces (parts 5 and 6) being slid into grooves on the coop's interior panels.

Step 6

Insert part 7 into the designated slot on part 2.

Visual description: A long, thin piece (part 7) is shown being inserted into a groove on the top interior panel of the coop.

Step 7

Insert part 8 into the designated slots on part 2.

Visual description: A long, thin piece (part 8) is shown being inserted into grooves on the top interior panel of the coop.

Step 8

Insert part B into the designated slots on part 2.

Visual description: A piece labeled 'B' is shown being inserted into grooves on the top interior panel of the coop.

Step 9

Attach part 9 to the top of the coop using 3x C screws.

Visual description: A close-up shows three screws (C) being used to attach a flat panel (part 9) to the top of the coop.

Step 10

Attach part 10 to the coop.

Visual description: A door (part 10) is shown being attached to the front of the coop.

Step 11

Insert part 11 into the coop.

Visual description: A panel (part 11) is shown being inserted into the coop's interior.

Step 12

Insert part 12 into the coop.

Visual description: A panel (part 12) is shown being inserted into the coop's interior, following part 11.

Step 13

Insert part 13 into the coop.

Visual description: A panel (part 13) is shown being inserted into the coop's interior, following part 12.

Step 14

Attach part 11 to the coop using 4x D screws. Use part E and D screws for attachment.

Visual description: Shows screws (D) and washers (E). The diagram shows panel 11 being attached to the coop with screws.

Step 15

Attach part 14 to the coop.

Visual description: A panel (part 14) is shown being attached to the coop.

Step 16

Attach part 14 to the coop using 2x D screws. Use part E and D screws for attachment.

Visual description: Shows screws (D) and washers (E). The diagram shows panel 14 being attached to the coop with screws.

Step 17

Attach part F to the coop. Use 3x C screws to secure the lid.

Visual description: Shows part F and screws (C). The diagram illustrates attaching a hinge (F) and then securing the coop's lid with screws.

Step 18

Attach part G to the coop. Use 2x C screws to secure the lid hinge.

Visual description: Shows part G and screws (C). The diagram illustrates attaching another hinge (G) to the coop's lid.

Step 19

Attach part H to the coop. Use 2x I screws to secure the lid.

Visual description: Shows part H and screws (I). The diagram illustrates attaching a latch or support (H) to the coop's lid.

Complete

Your Kerbl Barney chicken coop is now assembled.

Visual description: An illustration of the fully assembled chicken coop.

Contact Information

For inquiries or support, please contact the respective Kerbl branch:

Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach, Germany
Tel: +49 8086 933-100
Fax: +49 8086 933-500
E-Mail: info@kerbl.de
Website: www.kerbl.de
Kerbl Austria Handels GmbH
Wirtschaftspark 1
9130 Poggersdorf
Tel: +43 4224 81555
Fax: +43 4224 81555-629
E-Mail: order@kerbl-austria.at
Website: www.kerbl-austria.at
Kerbl France Sarl
3 rue Henri Rouby, B.P 46 Soultz
68501 Guebwiller Cedex, France
Tel: +33 3 89 62 15 00
Fax: +33 3 89 83 04 46
E-Mail: info@kerbl-france.com
Website: www.kerbl-france.com
Kerbl UK Limited
8 Lands End Way
Oakham, Rutland
LE15 6RF UK
Phone: +4401572722558
Fax: +44 01572 757614
E-Mail: enquiries@kerbl.co.uk
Website: www.kerbl.co.uk

Models: 81731, 81731 Barney Plastic Chicken Coop, 81731, Barney Plastic Chicken Coop, Chicken Coop, Coop

File Info : application/pdf, 12 Pages, 2.72MB

243062

References

Adobe PDF Library 17.0 Adobe InDesign 19.5 (Windows)

Related Documents

	Kerbl 82806 Hobbyfarming Chicken Coop Assembly Instructions Detailed assembly instructions for the Kerbl 82806 Hobbyfarming chicken coop, including a comprehensive parts list and step-by-step guidance for construction. Features advice on product care and a link to a video tutorial.
	KERBL EasyProtect Automatic Chicken Door Instructions This document provides instructions for the KERBL EasyProtect Automatic Chicken Door, including setup, operation, safety guidelines, and troubleshooting.
	Kerbl Automatic Chicken Door Control - Instructions for Use Comprehensive instructions for the Kerbl Automatic Chicken Door Control, model #70550. Learn about setup, operation, safety guidelines, and troubleshooting for your automatic chicken coop door.
	EU Declaration of Conformity - Kerbl Nitrile Gloves Premium Plus Official EU Declaration of Conformity for Kerbl Nitrile Gloves Premium Plus, detailing compliance with EU regulations and harmonized standards.
	KERBL Handstück mit Schneckenantrieb #18155 – Bedienungsanleitung Diese Bedienungsanleitung für das KERBL Handstück mit Schneckenantrieb #18155 bietet umfassende Informationen zur sicheren Verwendung, Wartung und Pflege dieses professionellen Werkzeugs für die Schur von Nutztieren wie Schafen, Ziegen, Lamas und Alpakas.
	Kerbl SMART-Energizer Electric Fence System Setup and Operation Guide Comprehensive guide for setting up and operating the Kerbl SMART-Energizer electric fence system, including app installation, device connection, earthing, fence connection, and battery care.
	PS1000/PS2000/PS3000 Scale Calibration Guide This guide provides instructions for calibrating the Kerbl PS1000, PS2000, and PS3000 scales, including parameter settings and calibration procedures.
	Contact Liquid 1 litre for AirOne / AirOne Flex Safety Data Sheet Safety data sheet for Contact Liquid 1 litre for AirOne / AirOne Flex, providing information on composition, first aid, fire-fighting measures, handling and storage, and toxicological information.