Xiaomi Redmi A2 User Manual

Getting Started

To turn on your device, press and hold the power button. Follow the on-screen instructions to set up your device.

For more information, visit the official website: www.mi.com/global/service/userguide

SIM Card Information

Do not insert non-standard SIM cards into the SIM card slot, as they may damage the slot.

Electrical and Electronic Equipment Waste (WEEE)

Please follow special precautions when disposing of this device. The WEEE symbol indicates that this product should not be disposed of with other household waste in the EU. Recycle responsibly to prevent harm to the environment and human health. Use return and collection systems or contact the retailer where you purchased the device.

Safety Precautions

General Safety:

• Read all safety information before using the device.
• Do not use unauthorized cables, power adapters, or batteries, as they may cause fire, explosion, electric shock, or other hazards.
• The operating temperature for this device is 0°C to 40°C. Using the device outside this range may damage it.
• Do not attempt to replace the built-in battery yourself.
• Charge the device only with the provided and authorized power cable or adapter.
• Use only authorized accessories compatible with your device.
• Disconnect the device from the charger and the power outlet once charging is complete. Do not charge the device for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Improper handling of batteries can cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to local regulations.
• Do not disassemble, strike, crush, or ignite the battery. If the battery appears deformed or damaged, stop using it immediately.
• Do not short-circuit the battery, as this may cause overheating, burns, or other injuries.
• Do not place the battery in an environment with high temperatures, as overheating may cause an explosion.
• Do not disassemble, strike, crush, or ignite the battery, as this may cause battery leakage, overheating, or explosion.
• Do not ignite the battery, as this may cause fire or explosion.
• The user cannot remove or replace the battery. Battery removal or repair should only be performed by an authorized service center.
• Keep the device dry.
• Do not attempt to repair the device yourself. Contact customer support or an authorized service center if any part of the device is not functioning properly.
• Connect other devices according to the instructions in the manual. Do not connect incompatible devices to this device.
• Power outlets should be installed near the equipment and should be easily accessible.

Specific Safety Measures:

• Comply with all applicable laws and regulations that restrict the use of mobile phones in certain situations and environments.
• Do not use the phone at gas stations or in potentially explosive atmospheres or environments, including fuel or chemical storage areas, or areas where air may contain chemicals, particles like grain, dust, or metal powder.
• Observe all posted signs for turning off wireless devices such as phones or other radio equipment.
• Turn off your mobile phone or wireless device when in a blasting area or in areas that require the "two-way radio" or "electronic devices" to be switched off to prevent potential hazards.
• Do not use the phone in hospital operating rooms, intensive care units, or cardiac pacemakers. Always comply with hospital and medical facility rules and regulations.
• If you wear a medical device, consult your doctor and the medical device manufacturer to determine if the phone interferes with the operation of your device. To avoid potential interference with a pacemaker, always keep the mobile phone at a minimum distance of 15 cm from the pacemaker. You can achieve this by holding the phone to the ear on the opposite side of the pacemaker and not carrying it in a breast pocket.
• To avoid interference with medical equipment, do not use the phone near hearing aids, cochlear implants, or other similar devices.
• Comply with all in-flight safety regulations and turn off your phone when required.
• When driving, use the phone in accordance with applicable traffic laws and regulations.
• Do not use the phone outdoors during a thunderstorm to avoid lightning strikes.
• Do not use the phone to make calls while it is charging.
• Do not use the phone in high humidity areas, such as bathrooms, as this may cause electric shock, injury, fire, or damage to the charger.

Safety Statement

Update your phone's operating system using the built-in software update feature or visit an authorized sales point. Updating the software through other means may damage the device, lead to data loss, security issues, or other risks.

EU Regulations

Radio Equipment Directive Compliance Statement

Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE digital mobile phone with Bluetooth and Wi-Fi network function 23028RN4DG complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

Radiofrequency Exposure Information (Specific Absorption Rate, SAR)

This device complies with government requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit set by the Federal Communications Commission is 1.6 W/kg. For devices worn on the body, this device has been tested and complies with the FCC radiofrequency exposure guidelines for use with an accessory that does not contain metal and is positioned a minimum of 1.5 cm from the body. Compliance with radiofrequency exposure for body-worn operation with accessories containing metal has not been tested or approved, and the use of such accessories should be avoided. Any accessory used with this device for body-worn operation must maintain a minimum distance of 1.5 cm from the body.

SAR Information (Highest Specific Absorption Rate):

• SAR limit for 10g: 2.0 W/kg
• SAR values: Head: 0.897 W/kg; Body: 0.997 W/kg (5 mm distance).

Legal Information

This device can be operated in all EU member countries. Please comply with national and local regulations of the countries where the device is used. The usability of this device may be limited depending on the operator. Wi-Fi connection (including Wi-Fi frequency bands, Wi-Fi standards, and other functions ratified in IEEE 802.11 standards) may vary depending on regional availability and local network support. The function may be added via OTA when and where applicable.

2.4 GHz Band Restrictions:

Norway: This subsection does not apply to the geographical area within a radius of 20 km from the center of the town of Ny-Ålesund.

Frequency Bands and Power

This mobile phone offers the following frequency bands only in the EU region and the maximum radio frequency power:

• GSM 900: 35.5 dBm
• GSM 1800: 32.5 dBm
• WCDMA Band 1/8: 25.7 dBm
• LTE Band 1/3/7/8/20/28/38/40/41: 25.7 dBm
• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz Band: 20 dBm

Federal Communications Commission (FCC) Regulations

This mobile phone complies with Part 15 of the FCC Rules. The following two conditions apply to the phone's operation: (1) This phone may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular environment. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiofrequency Exposure Information (Specific Absorption Rate, SAR)

This device meets government requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.

The SAR limit set by the Federal Communications Commission is 1.6 W/kg. For body-worn operation, this device has been tested and complies with FCC radiofrequency exposure guidelines for use with an accessory that does not contain metal and is positioned a minimum of 1.5 cm from the body. Compliance with radiofrequency exposure for body-worn operation with accessories containing metal has not been tested or approved, and the use of such accessories should be avoided. Any accessory used with this device for body-worn operation must maintain a minimum distance of 1.5 cm from the body.

FCC Note:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with FCC Class B limits.

E-label

The device has an electronic label with certification information. To access it, go to Settings > About phone > Certification, or open Settings and type "Certification" in the search bar.

Model Information

Model: 23028RN4DG

2302 indicates that the product will be launched after February 2023.

Model: MDY-09-EW / MDY-14-EQ

For more information about the adapter, please visit our official website: www.mi.com/global/service/userguide

Disclaimer

This quick guide is published by Xiaomi or its local subsidiary. Improvements and changes to this guide due to typographical errors, inaccuracies in current information, or improvements to programs and/or equipment made by Xiaomi may be required at any time and without notice. However, such changes will be included in new online versions of the quick guide (see details at www.mi.com/global/service/userguide). All images are for illustration purposes only and may not accurately represent the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer Address: No. 019, 9th Floor, Building 6, Middle Road 33 Xi'erqi, Haidian District, Beijing, China, 100085

Brand: Redmi

© Xiaomi Inc. All rights reserved.

Model: 23028RN4DG