PawHut Dog Kennel Assembly Instructions

Model Numbers: IN231000685V01_GL, D02-178V00

Please read these instructions carefully and retain them for future reference.

Hardware Included

1 x 8 (250+1800mm)
2 x 5 (1000mm)
3 x 1 (1030mm)
4 x 1 (1030mm)
5 x 2 (1040mm)
6 x 2 (397mm)
7 x 2 (790mm)
8 x 2
A x 36
B x 18 (+2 spare)
C x 18 (+2 spare)
D x 1
E x 1 (Roof Cover)
F x 1
G x 8
H x 1 (Steel Wire)
I x 1 (Ties)
J x 1
K x 1
L x 1
R x 1 (Chain Link Mesh)
S x 1 (Chain Link Mesh Panel)

Assembly Steps

Follow the numbered steps below for assembly. Two people are recommended for assembly.

Step 1-3: Frame Assembly

Assemble the base frame by connecting the tubes as shown in diagrams 1-3. Ensure all connections are secure.

Diagram 1 shows connecting parts labeled '1' to form the base structure.

Diagram 2 shows connecting two sets of frame pieces.

Diagram 3 illustrates securing the frame pieces with fasteners.

Step 4-5: Forming the Structure

Continue assembling the frame, creating the uprights and the angled roof supports as depicted in diagrams 4 and 5.

Diagram 4 shows the frame being extended and angled.

Diagram 5 shows the basic structure with angled roof supports.

Step 6-9: Completing the Frame

Add the remaining frame pieces, including the door frame, as shown in diagrams 6-9. Use parts labeled '7' and '8' as indicated.

Diagram 6 shows the placement of parts '7' and '8'.

Diagram 7 shows attaching an additional frame piece labeled '2'.

Diagram 8 shows the final frame assembly with the door opening.

Diagram 9 shows the completed frame with parts labeled '6' attached.

Step 10-14: Attaching the Roof and Mesh

Attach the roof cover (E) and the chain link mesh (R, S) to the frame using the provided ties (I) and steel wire (H). Refer to diagrams 10-14 for placement.

Diagram 10 shows the initial roof structure.

Diagram 11 shows the completed roof structure.

Diagram 12 shows the attachment of the mesh panels.

Diagram 13 shows the final assembly with the mesh attached and secured with ties (I), fasteners (D, K, L), and steel wire (H).

Diagram 14 provides a close-up of the mesh attachment points.

Installing the Chain Link Mesh

Unroll the compressed chain-link mesh roll on the ground and extend it. Check for and realign any misaligned or unhooked mesh wires. Roll it again. Use ties (I) to fix one side of the mesh to the braided door frame. Wrap the mesh around the dog kennel, using ties (I) to secure it at the top and bottom to prevent slipping. Tighten the mesh, fix it to another doorframe pillar, and remove any excess mesh. Finally, reinforce and secure with steel wire (H).

Important Notices and Warnings

Notice:

  1. Assembly requires at least 2 people to avoid damage to the steel tubes.
  2. Do not use the cage unless all bolts, screws, and knobs are firmly secured.
  3. Please use the product on a flat, hard ground.
  4. Do not climb on the product or attempt unauthorized revisions.
  5. Caution: Risk of pinching hands.

Warning:

A: Ensure every post is upright.

B: Fasten part (C) with the Rand electric tool in the correct direction.

C: Make sure every part (C) is assembled correctly before putting your kennel into use.

Contact Information

For any questions or assistance, please contact the customer care center of the respective importer.

Aosom LLC (USA)

Phone: 001-877-644-9366

Email: customerservice@aosom.com

Address: 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA

Aosom Canada Inc. (Canada)

Phone: (3) 416-792-6088

Email: customerservice@aosom.ca

Address: 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9

MH STAR UK LTD (UK)

Phone: (3) 0044-800-240-4004

Email: enquiries@mhstar.co.uk

Address: Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH

SPANISH AOSOM, S.L. (Spain & Portugal)

Phone (Spain): (3) 0034-931294512

Email (Spain): atencioncliente@aosom.es

Website (Spain): WWW.AOSOM.ES

Phone (Portugal): (3) 0034-931294512 (Mon-Fri 7:30 AM - 4:30 PM)

Email (Portugal): info@aosom.pt

Website (Portugal): WWW.AOSOM.PT

Address: C/ ROC GROS, N 15. 08550, ELS HOSTALETS DE BALENYÀ, SPAIN.

AOSOM Italy srl (Italy)

Phone: (3) 0039-0249471447

Email: clienti@aosom.it

Address: Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)

MH France (France)

Phone: 0033-1-84166106

Email: aosom@mhfrance.fr

Address: 2, rue Maurice Hartmann, 92130 Issy-les-Moulineaux

Aosom Germany (Germany)

Phone: (3) 0049-0(40)-88307530

Email: service@aosom.de

Address: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany

Disposal Information

Please consider donating or recycling this product. Options include donation to an association, delivery to a recycling center, or disposal.

Models: D02-178V00 Dog Kennel, D02-178V00, Dog Kennel, Kennel

File Info : application/pdf, 11 Pages, 6.02MB

PDF preview unavailable. Download the PDF instead.

IN231000685V01 GL D02-178V00

References

Corel PDF Engine Version 18.1.0.661 CorelDRAW X8

Related Documents

Preview PawHut D02-153V01 Dog Playpen Assembly Instructions
Step-by-step assembly guide for the PawHut D02-153V01 Dog Playpen, including a detailed parts list and instructions for setting up the outdoor dog kennel with canopy. Features clear diagrams explained in text.
Preview PawHut Heavy Duty Galvanized Steel Outdoor Dog Kennel Assembly Instructions
Detailed assembly instructions for the PawHut D02-225V00 heavy-duty galvanized steel outdoor dog kennel. Includes parts list, hardware list, and step-by-step visual guides with textual descriptions.
Preview PawHut D02-038 Outdoor Dog Kennel Assembly & Instruction Manual
Comprehensive assembly and instruction manual for the PawHut D02-038 outdoor dog kennel. Includes a detailed parts list, step-by-step assembly guide, and important safety notices for proper setup and use.
Preview PawHut Heavy Duty Outdoor Dog Kennel Assembly Instructions
Comprehensive guide for assembling the PawHut Heavy Duty Outdoor Dog Kennel, model D02-092. Includes parts list, hardware, and step-by-step assembly instructions.
Preview PawHut Outside Dog Kennel Assembly Instructions
Step-by-step assembly guide for the PawHut Outside Dog Kennel (4.6' x 4.6' x 5'), including parts list and assembly steps.
Preview PawHut Outdoor Dog Kennel Assembly Instructions
Assembly instructions and parts list for the PawHut Outdoor Dog Kennel with rotating bowl holders, model D02-093.
Preview PawHut Heavy Duty Dog Kennel Playpen Assembly Instructions
Comprehensive assembly guide for the PawHut Heavy Duty Dog Kennel Playpen, including parts list and step-by-step instructions. Model numbers IN220901166V01_GL, D02-049V03.
Preview PawHut Dog Kennel Assembly Instructions
Step-by-step assembly guide for the PawHut D02-048V05 dog kennel, including a detailed parts list, assembly steps, and important safety notices.