PawHut Outdoor Dog Kennel Assembly Instructions
Model: D02-093
Important Information
Please read these instructions carefully and retain them for future reference.
Parts List
- A: Wire Panel (x11)
- B: Wire Panel with Door (x1)
- C: Roof Support Pole (x3)
- D: Roof Support Pole (x2)
- E: Waterproof Cover (x1)
- F: Connector Clip (x24)
- G: Panel Connector (x24)
- H: Roof Connector (x4)
- J: Door Latch (x1)
- K: Roof Connector (x2)
Hardware
- L: Tie-down Rope (x18)
- M: Screw (x28 + 1 spare)
- N: Rotating Bowl Holder (x2)
- P: Cap (x2)
Assembly Steps
-
Step 1
Arrange the wire panels (A and B) to form the base structure of the kennel. Panel B, with the door, should be placed as shown in the diagram.
Diagram shows 4 panels (A) and 1 panel (B) arranged in a square/rectangular shape, with panel B positioned at one side.
-
Step 2
Connect the panels using the connector clips (G) and panel connectors (F). Ensure the panels are securely attached. The diagram shows close-ups of how connectors G and F attach to the panel edges and how the panels join.
Diagram shows the kennel structure partially assembled, with connectors F and G being used to join panels. It also shows a checkmark [✔️] for correct assembly and a cross [❌] for incorrect assembly of panels.
-
Step 3
Attach the roof support poles (C) to the top of the kennel structure. Use the provided connectors. Ensure the poles are correctly oriented, with the loops facing upwards.
Diagram shows the kennel with three roof support poles (C) being attached to the top corners. Close-up views show correct and incorrect attachment methods.
-
Step 4
Install the remaining roof support poles (D) and secure them using the roof connectors (H and K) and screws (M). Attach the waterproof cover (E) over the assembled frame.
Diagram shows the installation of roof support poles (D) using connectors H, K, and screws M. It also shows the waterproof cover (E) being placed over the kennel.
-
Step 5
Attach the rotating bowl holders (N) to the designated spots on the kennel. Secure the waterproof cover (E) using the tie-down ropes (L). Attach the door latch (J) to the door.
Diagram shows close-ups of the tie-down rope (L) being attached to the cover, the rotating bowl holder (N) being attached to the kennel, and the door latch (J) being fitted to the door.
Contact Information
For any questions or assistance, please contact the customer care center:
- US: 001-877-644-9366, customerservice@aosom.com
- CA: 416-792-6088, customerservice@aosom.ca
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- ES: 0034-931294512, atencioncliente@aosom.es
- PT: 0034-931294512, info@aosom.pt
- DE: 0049-0(40)-88307530, service@aosom.de
- IT: 0039-0249471447, clienti@aosom.it
- FR: 0033-1-84166106, aosom@mhfrance.fr
Imported by:
- US: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- CA: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
- UK: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
- ES/PT: SPANISH AOSOM, S.L., C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
- DE: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany
- IT: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
- FR: MH France, 2, rue Maurice Hartmann 92130 Issy-les-Moulineaux, France
Made in China
Recycling Information
Please recycle or dispose of this product responsibly. [♻️]
