ULTIMEA Apollo S40 Pro User Manual

WE ARE READY TO HELP

For assistance, visit support.ultimea.com or download the Ultimea app by scanning the QR code or searching on Google Play or Apple Store.

Contact Information:

• Email: support@ultimea.com
• US Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
• EU Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
• Social Media: @ultimea_official

1 ACCESSORIES LIST

Included accessories:

• Power Adaptor (x1)
• HDMI ARC Cable (x1)
• Digital Optical Cable (x1)
• Stereo 3.5mm to RCA Audio Cable (x1)
• Stereo RCA to RCA Audio Cable (100mm) (x1)
• Stereo RCA to RCA Audio Cable (2.5m) (x1)
• Wall Mounting Kit (x2)
• Wall Bracket (x2)
• Remote Control (x1)
• Base (x2)
• User Manual (x1)

2 SOUNDBAR CONTROLS

Control Panel

1 VOL+: Volume Up

2 VOL-: Volume Down

3 Power Button: Press to power on / off.

4 SOURCE: Press to switch source: ARC - OPTICAL - BT - AUX - USB. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Apollo S40 Pro).

Remote Control

1 Power Button: Press to power on / off.

2 ARC: Press to switch to HDMI ARC source.

3 BT: Press to switch to Bluetooth source and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually on your mobile phone / PC / TV (BT ID: Apollo S40 Pro).

4 OPT: Press to switch to OPTICAL source.

5 AUX: Press to switch to AUX source.

6 LED: Press to turn off LED, press again to turn on.

7 USB: Press to switch to USB source.

8 +: Volume Up

9 -: Volume Down

10 <: Previous. For BT and USB mode only: Skip to previous track.

11 >: Next. For BT and USB mode only: Skip to next track.

12 ▷II: Play / Pause. For BT and USB mode only. USB mode: Hold for 3 seconds to switch between single loop playback and list loop playback.

13 MOVIE: Press to switch to MOVIE mode, the display will show: "ER 1".

14 GAME: Press to switch to GAME mode, the display will show: "E92".

15 MUSIC: Press to switch to MUSIC mode, the display will show: "E93".

16 BASSMAX: Press to adjust bass level, the display will show: "65-3", "65-2", "65-1", "650", "651", "652", "653".

17 Mute: Mute / Recover the volume.

3 SOUNDBAR INSTALLATION

Horizontal placement:

1. Align the joints of the two parts.
2. Twist to connect.
3. Plug in the Stereo RCA to RCA Audio Cable.

Detached and stand on base:

1. Set the soundbar on the base and align the joints.
2. Twist to connect with the base.
3. Plug in the Stereo RCA to RCA Audio Cable.

4 REAR PANEL

Connections available:

• DC IN
• ARC
• OPTICAL
• USB
• AUX
• SUB OUT (Connect to active subwoofer - not included)

USB Port: Supports MP3 files with 128GB max memory.

5 CONNECT TO TV VIA HDMI OUT ARC

Step 1: Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.

Step 2: Connect the other end into the ARC port of the soundbar.

Step 3: Press the "ARC" button on the remote control to select "ARC" input.

Troubleshooting: If there is no sound, try setting the TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM). Ensure the "CEC" function on your TV is turned on. When eARC / ARC is connected, your TV remote control can control the soundbar and TV simultaneously (Turn on/off, Adjust volume).

6 CONNECT TO TV VIA OPTICAL / AUX

OPTION 1: OPTICAL

1. Make sure the TV's port is OPTICAL OUT, connect both sides of the cable to OPTICAL, for both the TV and the soundbar.
2. Ensure the optical plug is inserted correctly. Do not insert the plug upside down and break the optical.

Note: If audio is coming from the internal TV speakers, mute or minimize the TV volume.

Troubleshooting: If there is no sound, try setting the TV audio output to PCM.

OPTION 2: AUX

1. Connect the 3.5mm to RCA audio cable to connect to your TV's RCA AUDIO OUT port.
2. Ensure the color of the cables ends matches the color of the TV ports.

Note: Please remember to unplug the AUX cable from TV and Soundbar when you want to switch to another mode.

7 CONNECT TO BLUETOOTH®

Press the "BT" button on the soundbar or press the "BT" button on the remote control to enter Bluetooth pairing mode.

Go to the Bluetooth setting on your phone, find and select "Apollo S40 Pro" to connect the soundbar.

Note: If it's already in Bluetooth mode and connected, press and hold the "BT" button for 3 seconds to disconnect the current device and choose to connect to a new device manually on your mobile phone / PC / TV.

8 PLACEMENT OPTIONS

Horizontal placement:

The soundbar should be placed at or near ear level.

Detached and stand on base:

The soundbar should be placed at or near ear level.

9 WALL MOUNT INSTALLATION

Follow the diagrams to mount the soundbar on the wall.

10 SPECIFICATIONS

SAFETY INSTRUCTIONS

Please read this user manual carefully and save it for future reference.

• Do not make unauthorized alterations to the product.
• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device.
• Clean with a dry, soft lint-free cloth. Do not use corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose batteries to extreme heat sources.
• Ideal operating temperature: 41°F/5°C to 95°F/35°C.
• Install the adapter near the device and ensure it is easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

PROPER DISPOSAL INSTRUCTIONS

This mark on the product or packaging indicates it should not be disposed of with other household waste. Recycle responsibly to promote sustainable reuse of material resources.

Waste Electrical & Electronic Equipment: Contact the retailer or local government for details on environmentally safe recycling. Business users should contact their suppliers.

FCC REGULATORY COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, try the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE WARNINGS

1. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
2. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
3. WARNING: The adapter plug is used as disconnect device, the disconnect device shall remain readily operable.
4. Frequency: 2.402GHz-2.48GHz
5. The Max. transmit power: 10 dBm

ISED WARNINGS

This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and ompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Declaration of Conformity

Manufacturer: Ultimea Technology (Shenzhen) Limited

Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000

Declares under sole responsibility that the product:

• Trade Mark: ULTIMEA
• Product Name: Apollo S40 Pro 2.2 Channel Detachable Soundbar
• Model No.: U3301

is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/65/EU). The product is responsible for affixing the CE marking.

Standards Applied: EN 55032:2015/A1:2020, EN 55035:2017/A11:2020, EN IEC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013/A2:2021, ETSI EN 301 489-1 V2.2.3 (2019-11), ETSI EN 301 489-17 V3.2.4 (2020-09), ETSI EN 300 328 V2.2.2 (2019-07), EN 50663: 2017, EN IEC 62368-1:2020+A11:2020, IEC 62321-3-1:2013, IEC 62321-4:2013+A1:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-8:2017.

Full Name: Yoyo.Yu

Position: Approbation Manager

Signature: Yoyo Yu

Place/Date: Shenzhen, China / Aug. 9-2024

Trade Marks:

Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by Ultimea Technology (Shenzhen) Limited is under license. Other trademarks and trade names are those of their respective owners.

HDMI: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Company Information:

• EC REP: Ultimea GmbH, Buchenring 57, 22359 Hamburg, Germany
• UK REP: EVATOST CONSULTING LTD, Office 101, 32 Threadneedle Street, London, United Kingdom, EC2R 8AY
• Other: Dynamic Inc. All rights reserved, registered in the United States and other countries. 9804 Crescent Center Drive, Suite 604, Rancho Cucamonga, CA 91730. Made in China.

Manufacturer: Ultimea Technology (Shenzhen) Limited, Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China 518000

Support: If you need support, kindly reach out to our service team. We are always glad to help.

• +1 888-598-8875 (US)
• +49 89-628-25828 (EU)
• support@ultimea.com
• support.ultimea.com

Certifications: FC, CE, RoHS

Social Media: Xf, @ultimea_official, YouTube, TikTok