Momcozy LM02 Kneading Lactation Massager

IMPORTANT SAFETY INFORMATION

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

DECLARATION OF CONFORMITY

EU Compliance Statement: Hong Kong Lute Technology Co., Limited hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU.

DISPOSAL

At the end of the product life cycle, do not throw this product into the normal household garbage, but bring it to a collection point for the recycling of electronic equipment and battery. Waste Electrical and Electronic Equipment may have potentially harmful effects on the environment. Improper disposal may lead to the accumulation of harmful toxins in air, water and soil, which is harmful to human health. You have an obligation to dispose of the device correctly. Consult your municipal authority for information about disposal.

WARNING

• This Kneading Lactation Massager is intended for a single user. It is not recommended to rent or share.
• Do NOT allow anyone unfamiliar with this product to use it.
• Do NOT use if the charging cable or product is damaged. Contact our customer service team for an exchange.
• If the charging cable casing or wiring becomes loose, separated, or frayed, stop using the charging cable immediately and contact the device manufacturer.
• Parental or guardian supervision is required at all times if users have physical or intellectual disabilities.
• Do not clean or sterilize the product with a washing machine, microwave, or dishwashing machine.
• This kneading lactation massager is intended to help women overcome some breastfeeding challenges, like engorged breasts or clogged milk ducts. Please use it in strict accordance with the described purpose in this manual.
• Only use the charging cable that comes with the unit.

INDICATIONS FOR USE

Momcozy kneading lactation massager is intended to alleviate the pain and discomfort associated with breastfeeding, clogged ducts, engorgement, and mastitis. Moreover, it speeds up the let-down and milk flow.

PRODUCT OVERVIEW

• Kneading Lactation Massager * 1
• Charging Cable * 1
• Storage Bag * 1
• User Manual * 1

PRODUCT DESCRIPTION

The Momcozy LM02 features the following controls and indicators:

• Massage Ball Control: Activates and adjusts the massage balls.
• Temperature Indicator: Shows the current heat level.
• Heat Control: Adjusts the heat settings.
• Power & Vibration Control: Turns the device on/off and cycles through vibration patterns.
• Magnetic USB Charging: Port for charging the device.

Heat Control Levels:

• Low Heat (37 °C)
• Medium Heat (41 °C)
• High Heat (45 °C)

OPERATING THE MASSAGER

Power/Vibration Control

Press and hold for 1.5 seconds to enter standby mode; the indicator remains solid white. The massager cycles through 6 vibration patterns by pressing the power button.

Massage Ball Control

In standby mode, short press to activate the massage balls. The massager changes speed between low, medium, and pause by pressing this button.

Heat Control

In standby mode, short press to change heat levels (low, medium, high) or pause.

Battery Indicator

• In charging: The indicator will be blinking white.
• Fully charged: The indicator will be solid white.
• In working: The indicator will be solid white.
• Low battery: The indicator will be blinking white and go out when running out of battery.

CHARGING YOUR MASSAGER

1. Connect the charging cable provided to the massager.
2. Plug the USB into a computer or USB adapter (DC 5V 1.5A).
3. The indicator will be blinking white while the massager is charging.
4. The massager is fully charged when the indicator remains solid white.
5. It takes approximately 1.5 hours to get the device fully charged. Recharge the massager as needed.

HOW TO USE

1. Use the massage balls to reach deeper into the breast ducts and gently massage the clogged area on the breast.

   [Illustration: Deep-kneading massage balls being applied to the breast.]

2. Massage the clogged area on the breast with a comfortable vibration pattern.

   [Illustration: Massager placement for vibration on the breast.]

3. Allow a few minutes for the massager to reach full heat and warm the breast to stimulate milk flow.

   [Illustration: Massager placement for heating on the breast.]

4. Massage the clogged area on the breast with the curved side, while moving towards the nipple.

   [Illustration: Massager being moved towards the nipple on the breast.]

Note:

• When heating, the device will change from high heat to low heat after 20 minutes. It will shut off automatically after heating for 30 minutes.
• The device cannot be turned on when charging.
• Fully charge the battery before the first use.
• Allow a few minutes for the massager to reach full heat.

CARE AND STORAGE

• Always clean your massager before and after every use.
• Unplug from power source before cleaning.
• Clean with warm water.
• Do NOT submerge the massager in water.
• Allow the massager to air dry.
• Avoid direct sunlight.
• Store the massager in a clean and dust-free place.

PRODUCT SPECIFICATION

FCC COMPLIANCE

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

MANUFACTURER AND CONTACT INFORMATION

UK Representative: Prolinx Global LTD, 27 Old Gloucester Street London, WC1N 3AX, UK

EU Representative: Prolinx GmbH, Brehmstr. 56, 40239 Duesseldorf Germany

Manufacturer: Hong Kong Lute Technology Co., Limited, Room 02, 21/F, Hip Kwan Commercial Building, 38 Pitt Street, Yau Ma Tei, Kowloon, Hongkong

Email: support@momcozy.com

US Importer: PACIFIC FORTUNE MANAGEMENT INC, 145 E Duarte RD Suite AA 198 Arcadia CA 91006

Product Name: Kneading Lactation Massager

Model Number: LM02

Rated Input: 5V = 1A