Instruction Manual
Taramps TPS 408F
400W Musical
Warning: The installation of this product must be carried out by a qualified professional.
TPS 408F PASSIVE SPEAKER BOX WITH ONE 8-INCH SPEAKER
The TPS 408F is an 8-inch passive subwoofer with Front-Firing projection, perfect for those who want more impact even in compact environments. It is 400 Watts of full-bodied bass, with MDF structure and installation made easy by the 4 Ohm impedance. Ideal for residential areas, stores, clinics, gyms, bars, among others, delivering an engaging and sophisticated sound experience.
Technical Specifications
| Musical Program Power | 400W Musical |
| Power RMS | 200W RMS |
| Subwoofer Diameter | 8 INCHES |
| Impedance | 4 Ohms |
| Frequency Response (-3 dB) | 10 Hz to 250 Hz |
| Resonance Frequency | 29 Hz |
| Dimensions (WxHxD) | 13.19" x 10.71" x 15.04" (335 x 272 x 382 mm) |
| Acoustic Components | 1x 8" SPEAKER |
| Cone Material | Polypropylene |
| Gabinet | Vented Box |
| Cabinet Finish | Laminate |
| Color | Ebony Black |
| Grille Finish | Black Fabric |
| Cabinet Weight | 25.08 lb (11,4 Kg) |
| Warranty | 12 Months |
Product Dimensions
Note: To obtain a better sound quality, it is important to position the back of your speaker box next to the wall, at a maximum distance of 7.87" (20cm) and minimum of 3.94" (10cm).
Diagram Description: The diagram shows two views of the speaker box. The first view is a front view with dimensions 15.04" (382.00 mm) width and 13.19" (335.00 mm) height. The second view is a side view with dimensions 10.71" (272.00 mm) width.
Connecting the Subwoofer
1 - INPUT - Connect output of amplifier to passive box.
Connect the amplifier output to the subwoofer input.
Diagram Description: The diagram illustrates connecting the amplifier output to the passive box. It shows a THS 6000 amplifier with connections labeled CH3/CH4, X-OVER (OFF, LPF, HPF, ROUTE, L/R, L+R, R), and notes to set the X-OVER of channels 3 and 4 to LPF. It also shows a connection from the amplifier to the TPS 408F passive box. Another diagram shows connecting the output of the amplifier from the active speaker box (TAS 408F) to the passive speaker box (TPS 408F).
Note: Make BRIDGE Connection on the THS 6000.
Note: CONNECT THE OUTPUT OF THE AMPLIFIER FROM THE ACTIVE SPEAKER BOX TO THE PASSIVE SPEAKER BOX.
