Yeedi DVX34 Robot Vacuum Cleaner Manual
2. Operating and Programming
2.3 yeedi App
To enjoy all available features, it is recommended to control your Robot via the yeedi App.
Before you start, make sure that:
- Your mobile phone is connected to a Wi-Fi network.
- The 2.4GHz band wireless signal is enabled on your router.
- The Wi-Fi indicator light on Robot is slowly flashing.
Wi-Fi Indicator Light
| Indicator Light | Scenario |
|---|---|
| Slowly flashing | Disconnected to Wi-Fi or waiting for Wi-Fi connection |
| Rapidly flashing | Connecting to Wi-Fi |
| Solid | Connected to Wi-Fi |
Tips: If you have any problems during the Wi-Fi setup process, refer to the Troubleshooting > Wi-Fi Connection section in this manual.
[App Store] [Google Play]
2.4 Start, Pause, Wake Up, Power Off
- Start: [Illustration of starting the robot]
- Pause: [Illustration of pausing the robot]
Note: The robot's Control Panel stops glowing after the robot is paused for a few minutes. Press the AUTO Mode Button on Robot to wake up the robot. - Wake Up: Press the AUTO button on Robot to wake it up
- Power OFF: [Illustration of powering off the robot]
Note: When Robot is not working, it is recommended to keep it switched ON and charging.
2.5 Mopping System
Note:
- To prolong the service life of the reservoir, it is recommended to use purified water or softened water for the mopping system.
- If you need to clean the carpet, please uninstall the Mopping Pad Plate first.
- Empty the reservoir after Robot finishes mopping.
[Illustration of mopping system steps 1-3]
3. Maintenance
3.1 Mopping System
Before performing cleaning and maintenance tasks on Robot, turn the robot OFF and unplug the Docking Station.
[Illustration of mopping system maintenance steps 1-8]
3.2 Dust Bin and Filters
Dust Bin
[Illustration of dust bin cleaning steps 1-8]
Note: 1. Please rinse the filter with water as shown above. 2. Do not use finger or brush to clean the filter. 3. Be sure to dry out the filter for at least 24 hours after washing.
3.3 Main Brush, Edge Brush and Mapping Sensor
Note: A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.
Main Brush
[Illustration of main brush maintenance steps 1-3]
Edge Brush
[Illustration of edge brush maintenance]
Mapping Sensor
[Illustration of mapping sensor maintenance]
3.4 Other Components
[Illustration of other component cleaning steps]
Note: Before cleaning the robot's Charging Contacts and Docking Station Pins, turn the robot OFF and unplug the Docking Station.
3.5 Regular Maintenance
To keep Robot running at peak performance, perform maintenance tasks and replace parts with the following frequencies:
| Robot Part | Maintenance Frequency | Replacement Frequency |
|---|---|---|
| Washable Mopping Pad | After each use | Every 50 washings |
| Reservoir/Mopping Pad Plate | After each use | / |
| Edge Brush | Once every 2 weeks | Every 3-6 months |
| Main Brush | Once per week | Every 6-12 months |
| Sponge Filter/ High Efficiency Filter | Once per week | Every 3-6 months |
| Universal Wheel, Anti-Drop Sensors Bumper, Mapping Sensor, Charging Contacts, Docking Station Pins | Once per week | / |
A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.
Note: yeedi manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.
4. Indicator Light
Robot
Robot will tell you something is wrong with an indicator light and voice report. More detailed support is available through the yeedi app and online website.
| Indicator Light | Scenario |
|---|---|
| AUTO Mode Button glows a solid WHITE. | The robot is cleaning. |
| AUTO Mode Button flashes WHITE. | The robot is paused while cleaning. |
| The robot is charging. | |
| The robot is starting. | |
| The robot is relocating. | |
| AUTO Mode Button glows a solid RED. | The robot has low battery. |
| AUTO Mode Button flashes RED. | The robot has a problem. |
5. Troubleshooting
5.1 Troubleshooting
| No. | Malfunction | Possible Causes | Solutions |
|---|---|---|---|
| 1 | Robot is not able to connect to the home Wi-Fi network. | Incorrect home Wi-Fi username or password entered. Robot is not within range of your home Wi-Fi signal. Network setup started before Robot was ready. Robot is not switched ON. |
Enter the correct home Wi-Fi username and password. Make sure Robot is within range of your home Wi-Fi signal. Turn ON Power Switch. Press the RESET Button for 3 seconds. Robot is ready for network setup when it plays a musical tune and its Wi-Fi Indicator light flashes slowly. Switch ON Robot. |
| 2 | Robot is not charging. | Robot has not connected to the Docking Station. The Power Cord is not connected to the Docking Station. The battery is completely discharged. Make sure the Docking Station is connected to the power supply. |
Be sure that the robot's Charging Contacts have connected to the Docking Station Pins. Make sure the Power Cord is firmly connected to the Docking Station. Re-activate the battery. Switch ON. Place Robot on the Docking Station by hand, remove after charging for 3 minutes, repeat 3 times; then charge normally. The Docking Station is not connected to the power supply. |
| 3 | Robot cannot return to the Docking Station. | The Docking Station is not correctly placed. The Docking Station is disconnected or moved. Robot is working in a dark environment. Robot is paused for more than 60 minutes. |
Refer to section 2.2 to correctly place the Docking Station. Please check if the Docking Station is connected to power. Do not move the Docking Station manually. Make sure to use Robot in a well illuminated environment. Avoid pausing Robot for over 60 minutes. |
| 4 | Robot returns to the Docking Station before it has finished cleaning. | Robot did not start cleaning from the Docking Station. Robot is working in a dark environment. When the battery gets low, Robot automatically switches to Return to Charger Mode and returns to the Docking Station to recharge itself. Working time varies according to floor surface, room complexity and the Cleaning Mode selected. |
Make sure Robot starts cleaning from the Docking Station. Make sure to use Robot in a well illuminated environment. This is normal. No solution necessary. This is normal. No solution necessary. |
| 5 | Robot gets stuck while working and stops. | Robot is tangled with something on the floor (electrical wires, curtains, Carpet fringing, etc.). | Remove small objects from the floor and tidy up the cleaning area before Robot starts cleaning. Robot will try various ways to free itself. If it is unsuccessful, manually remove the obstacles and restart. |
| 6 | Robot makes much noise when cleaning. | The brushes are tangled, or the dust bin is stuck. | Clear the debris stuck regularly. |
| 7 | The water is not coming out of the Reservoir when Robot is mopping. | The water inlet filter on the bottom of Reservoir is clogged. The Reservoir runs out of water. The water outlets on the bottom of Robot are clogged. |
Unscrew the water inlet on the bottom of Reservoir and clean the filter. Add water into the Reservoir. Check the water outlets on the bottom and clean. |
| 8 | The reservoir drops out of place during cleaning. | The reservoir is not properly installed. | The reservoir is properly installed when it clicks into place. |
5.2 Wi-Fi Connection
Before Wi-Fi setup, make sure Robot, mobile phone, and Wi-Fi network meet the following requirements.
Robot and Mobile Phone Requirements
- Robot is fully charged and the power switch of Robot is turned on.
- Wi-Fi status light slowly flashes.
- Turn off mobile phone's cellular data (you can turn it back on after setup).
Wi-Fi Network Requirements
- You are using a 2.4GHz or 2.4/5 GHz mixed network.
- Your router supports 802.11b/g/n and IPv4 protocol.
- Do not use a VPN (Virtual Private Network) or Proxy Server.
- Do not use a hidden network.
- WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
- WEP EAP (Enterprise Authentication Protocol) is not supported.
- Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).
- If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.
6. Product Specifications
| Model | DVX34 | |||
|---|---|---|---|---|
| 20V ⎓ 1A | ||||
| Docking Station Model | CH1822 | CH1918* | ||
| Rated Input | Rated Output | Rated Input | Rated Output (Charging) | |
| 100-240V ~ 50-60Hz 0.5A | 20V ⎓ 1A | 120V ~ 50-60Hz 8A | 20V ⎓ 1A | |
Note: Technical and design specifications may be changed for continuous product improvement.
* CH1918 is an Self-empty Station sold separately that automatically empties your Robot's dustbin.
Explore more accessories at https://www.yeedi.com.
File Info : application/pdf, 16 Pages, 5.30MB
DocumentDocumentRelated Documents
 |
Yeedi Vac Station Instruction Manual: Setup, Operation, and Maintenance Guide Comprehensive instruction manual for the Yeedi Vac Station robot vacuum cleaner. Covers setup, operation, maintenance, safety guidelines, troubleshooting, and product specifications for model DVX34. |
 |
Yeedi Vac Max Robot Vacuum Cleaner Instruction Manual This manual provides comprehensive instructions for the Yeedi Vac Max robot vacuum cleaner, covering setup, operation, maintenance, troubleshooting, and product specifications. Learn how to use your Yeedi robot for optimal cleaning performance. |
 |
yeedi DVX34 Robot Vacuum Cleaner: Setup, Operation, and Maintenance Guide Comprehensive guide for the yeedi DVX34 automatic battery-powered vacuum cleaner, covering setup, app usage, operation, maintenance, and indicator lights. Learn how to assemble, charge, clean, and troubleshoot your yeedi robot vacuum. |
 |
Yeedi 2 Hybrid Robot Vacuum Cleaner Instruction Manual Comprehensive instruction manual for the Yeedi 2 Hybrid robot vacuum cleaner, covering setup, operation, maintenance, troubleshooting, and specifications. Learn how to use your yeedi robot for optimal cleaning performance. |
 |
Yeedi Docking Station CH1822 Instruction Manual Comprehensive instruction manual for the Yeedi Docking Station CH1822, covering safety instructions, product details, usage, maintenance, and troubleshooting. |
 |
Yeedi Vac Hybrid Robot Vacuum Cleaner Instruction Manual Comprehensive instruction manual for the Yeedi Vac Hybrid robot vacuum cleaner, covering setup, operation, maintenance, troubleshooting, and product specifications. Learn how to use your Yeedi Vac Hybrid for optimal cleaning performance. |
 |
Yeedi K700 Robot Vacuum Cleaner Instruction Manual Comprehensive user manual for the Yeedi K700 robot vacuum cleaner, covering setup, operation, maintenance, safety guidelines, and troubleshooting. Available in English, French, and Spanish. |
 |
Yeedi K652G Robot Vacuum Cleaner Instruction Manual Comprehensive instruction manual for the Yeedi K652G robot vacuum cleaner, covering setup, operation, maintenance, and troubleshooting. Learn how to use your Yeedi robot vacuum for efficient home cleaning. |