Danfoss Standard JIP™ Ball Valves
Datasheet
Product Description
Danfoss Standard JIP™ ball valves are a series of shut-off valves with reduced flow, designed for district heating and cooling systems with circulating media. They are a series of steel ball valves with a fully welded body. Due to their construction, these valves are ideal for building installations.
Energy saving: With optimal flow design, these valves have the highest Kv value on the market, and therefore the lowest energy consumption for pumping.
Durability: Long service life and optimal sealing due to the construction and material chosen for the ball valve seal (carbon-reinforced PTFE) and spindle seal (graphite).
The valves are maintenance-free. In addition to shut-off valves in the main distribution network, Danfoss offers a range of additional valves, such as hot tap valves, zone valves, and drain valves.
Technical Data
- DN 15-600
- Kvs: 8-26300 m³/h
- PN: 16/25/40
- Leakage A (according to EN12266-1): both directions
- Temperature: 0 to 180 °C
- Medium: Circulating water / glycol water up to 50%
- Min. storage and transport temperature: -40 °C
Approvals and Standards
- 100% final quality control. Leak and shell testing, as well as dimension and function testing, are performed on each valve in accordance with applicable standards (EN 12266 Part 1 P10-P11-P12 and Part 2 F20).
- Pressure Equipment Directive 2014/68/EU module H1.
- Danfoss A/S is certified according to ISO 9001.
- Further certifications according to ISO 14001 and ISO 45001.
Ordering Information
Detailed ordering information, including product codes for various connection types (weld, flange, threaded) and configurations (with or without gearbox, handle types), is provided in tables across the document.
Dimensions
Dimensional drawings and tables with specific measurements (ØA, ØB, ØD, L, H, etc.) and weights are provided for different valve types and pressure ratings.
Construction and Material
The document details the construction and materials used for the ball valves, including:
- End connections (weld, flange)
- Body
- Ball
- Seals (ball seat, spindle)
- Spindle
- Other components
Materials include steel, stainless steel, PTFE, and graphite.
Performance Charts
Pressure loss/velocity and pressure loss/flow rate charts are included to help in selecting the appropriate valve size and operating conditions.
Pressure/Temperature Ratings
Pressure/temperature diagrams are provided for different valve series (JIP-WW, II, IW and JIP-FF, FW) and pressure ratings (PN16, PN25, PN40), indicating the normal operating area and steam area.
Accessories
Information on available accessories such as external hex drive, counter flanges, and insulation covers is presented with their respective order codes.
