Overview
Features
- 7-inch HD IPS Screen
- 180° Image Rotation
- Split Screen View (Only for Dual/Triple Lens models)
- LED Camera Lights & LED flashlight
- Detachable Probe Design
- Supports WiFi Connection
- PD Fast Charging
Applications
- Automotive or diesel repair and maintenance
- Inspection of hard-to-reach or hard-to-see areas or equipment
- Plumbing, construction & restoration applications
- Scientific education
- Outdoor exploration
- Rescue security
Safety
⚠️ WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire, or serious injury.
- Keep the tool dry, clean, and free from oil, water, gas, or other materials that may cause corrosion.
- This appliance is not intended for use by people with limited physical, sensory, or mental capabilities.
- This appliance is not intended for medical use. Keep bystanders or children away while operating the tool.
Maintenance
- Keep the camera lens clean.
- Keep the working area clean.
- Charge the device at least once every 3 months if it is left unused for a long time to prevent damage to the battery.
Specifications
Monitor
| Screen Type | 7-inch HD IPS Screen |
|---|---|
| Image Rotation | 180° |
| Monitor Resolution | 1280 x 720 |
| Port | Type-C USB, TF Card Slot, HDMI Port |
Camera
| Cable Length | 1M/3M/5M |
|---|---|
| View Angle | 78° |
| Split Screen | Yes (Only for Dual/Triple Lens models) |
| Video Resolution | Max to 1920x1080 |
| Image Resolution | Max to 1920x1080 |
| Waterproof | Camera & Cable IP67 |
| Light Source | Adjustable LED camera lights, LED flashlights on the back of the device |
Others
| Operating Temperature | -4°F to 140°F (-20℃ to 60℃) |
|---|---|
| Power Source | 6000mAh Lithium Polymer Battery |
| Runtime | About 4h |
| Charging Time | About 3.5h |
| Input | 5V = 1.5A / 9V = 1.5A / 12V = 1.2A, Supports PD Fast Charging |
| Work Voltage | 3.7V |
For more probe/cable options, please visit the official Teslong website and store: Teslong.com.
⚠️ NOTICE: Should you need replacement(s) of any other components, please contact Teslong customer service for help.
Functions
The device features various buttons and ports for operation:
- ① Cable Port: Connection point for the camera probe.
- ② Camera light button: Adjusts the camera LED's brightness.
- ③ Snap Button: Press to take a photo or start/end video recording. Hold to switch the camera view.
- ④ Mode button: Switches between photo taking, video recording, and album modes.
- ⑤ UP button: Navigates menus upwards.
- ⑥ Setting Button: Press to enter/exit the setting menu. Hold to turn On/Off WiFi signal.
- ⑦ OK button: Confirms selection or freezes the screen.
- ⑧ Down/Rotate button: Navigates menus downwards or rotates the image.
- ⑨ Power button: Long press to turn the device on or off.
- ⑩ Type-C Charging Port: For charging the device.
- ⑪ TF card slot (micro-SD): For inserting a memory card.
Additional components include:
- ⑫ Speaker: For audio output.
- ⑬ LED flashlight: Provides illumination.
- ⑭ 1/4" Screw hole for metal stand: For mounting the device.
- ⑮ LED flashlight button: Controls the LED flashlight.
- ⑯ HDMI Port: For connecting to an external display.
- ⑰ Reset button: Used to restore the device in case of crashes.
- ⑱ Microphone: For audio recording.
- ⑲ Metal stand: A stand for positioning the device.
A line drawing illustrates the front and rear/side views of the inspection camera, highlighting these components.
Using Your Inspection Camera
Initial Setup
Step 1: A diagram shows the front of the device. Text indicates: Remove the plastic screen cover before using this device.
Step 2: A diagram shows the probe cable connector being plugged into the monitor. Text indicates: Connect the cable to the monitor (make sure the camera is connected firmly to get the best image on the screen).
Power ON/OFF
A diagram shows the device with the power button highlighted. Text explains: Press and hold the Power Button to turn on the device.
TF Card Insertion
A diagram shows a TF card being inserted into a slot. Text states: The device is equipped with a TF memory card (inserted). Please make sure it's installed before use.
How to insert a TF card:
- Power on the device first before inserting the TF card.
- Make sure the orientation of the TF card is correct when inserting into the slot.
- Do not use excessive pressure when inserting or removing the TF card from the slot.
- Only take photos or record videos when a TF card is inserted.
- This device requires a Class 10 high-speed TF card; it will not work properly with a Class 4 low-speed card.
Power Button Lighting Details
- ? Device Running: Blue LED stays on.
- ?? Charging (Device on): Red/Blue LEDs flash.
- ? Charging (Device off): Red LED stays on.
Modes & Setting
Mode Selection: Press the Ⓜ button to switch between three modes: Photo Taking (?), Video Recording (?), or Album.
TF Card Status: Indicates whether a TF card is inserted or not.
Date and Time: The display shows "2023-01-01 08:00". This can be modified in the Settings menu.
Switch Take Photos and Video Recording
Take Photo: Press the Ⓜ button to switch to "take photo" mode, and press the ? button to take a photo.
Video Recording: Press the Ⓜ button to switch to "video recording" mode, and press the ▶️ button to start recording.
To enter the system settings menu, press the ⚙️ button twice in any mode. Use the ⬆️/⬇️ buttons to select and the ✅ button to save changes.
The default language is English. The system supports English, Chinese, German, French, Spanish, Italian, Russian, and Japanese.
How to Switch the View of Camera (Only for Dual/Triple Lens)
Hold the photo button (?) to switch the view between the Front Camera and Side Camera. Diagrams labeled A, B, C, AB, AC illustrate the available view combinations.
WiFi Connecting: How to Display the Image on Your Phone/Pad/Tablet
A flowchart illustrates the process:
- Use your phone to scan the QR code and download the "Smart Endoscope" app.
- Enable the device's WiFi in the settings menu.
- Connect to the device's WiFi network on your phone. At this time, the host's WiFi indicator blinks.
- Start displaying the image on your phone/pad/tablet.
- Click the ➕ button in the app to set up the device and start using it with your smartphone.
- Run the app.
⚠️ Please note: Photo Taking/Video Recording is ONLY supported by your Phone/PAD/Tablet (not available for the endoscope device itself) when in WiFi mode.
Scan the QR code or enter the activation code printed on the card to remove ads in the app.
Transfer Photo/Video Files to Your Computer
You can transfer files using two methods:
- Use a TF card reader to transfer data directly.
- Connect your computer with a Type-C USB cable to transfer files.
⚠️ Pull out the probe camera first before using the USB cable.
Charging the Device
Please use a USB wall charger that supports PD fast charging and the appropriate cable to charge your device.
Resetting the Device
If the device crashes, please press the reset button (⚙️) to restore it.
EU Environmental Protection
Do not dispose of old electrical products with your household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Customer Service
Please contact Teslong if you have any questions about their products.
- ?️ 12-month Limited Warranty
- ? Lifetime Technical Support
- ? Email: support@teslong.com | info@teslong.com
- ? Phone: 1-877-899-8809 (US) (Monday-Friday 9:00 AM–5:00 PM PST)
Regulatory compliance logos are displayed: FCC, CE, UKCA, RoHS.
Product Information: TESLONG NTS700 C0316V1.1 3.06.04.000901
