Triton TWX7 Workcentre
Schematic Overview
The document features a detailed schematic diagram presenting an exploded view of the Triton TWX7 Workcentre. This diagram visually represents the assembly of the unit, with various components clearly labeled with numerical identifiers corresponding to the parts list.
Parts List
| Part No. | Description | Qty |
|---|---|---|
| 4 | Leg (Front) | 1 |
| 5 | Foot | 4 |
| 6 | Long Shoulder Cap Screw | 1 |
| 7 | Leg cap | 4 |
| 8 | Carriage Bolt(Zinc) | 4 |
| 9 | Nylon Nut | 30 |
| 10 | Hexagon Socket Head Cap Screw | 24 |
| 11 | Leg Bracket, RH, Front | 1 |
| 12 | Knee Bumper | 4 |
| 13 | Flat head screw cross(Zinc) | 8 |
| 14 | Hex Nut | 4 |
| 15 | Knob | 1 |
| 16 | Leg Packer/Disc | 8 |
| 17 | Short extrusion (INFEED) | 1 |
| 18 | Scale pointer, Front | 1 |
| 19 | Truss Head Phillips Tapping Screws | 4 |
| 20 | Side Support Bracket, Front | 1 |
| 21 | Press Plate, Side Support Bracket | 2 |
| 22 | Flat washer | 12 |
| 23 | Triton small knob + Screw(Zinc) | 1 |
| 24 | Hexagon Socket Head Cap Screw | 2 |
| 25 | Hexagon Socket Head Cap Screw | 1 |
| 26 | Leg Bracket, LH, Front | 2 |
| 27 | Nylon Nut | 2 |
| 28 | Short extrusion (LH, LONG) | 4 |
| 29 | Table Corner | 1 |
| 30 | Flat head screw cross(Zinc) pulley | 8 |
| 31 | levelling block | 1 |
| 32 | Flat washer | 4 |
| 33 | Round Head Phillips Screw | 3 |
| 34 | Nylon Nut | 3 |
| 35 | WorkCentre Top | 12 |
| 36 | Hexagon Socket Head Cap Screw | 3 |
| 37 | Flat washer | 9 |
| 38 | Flat head screw cross(Zinc) | 1 |
| 39 | table insert slot, front | 1 |
| 40 | Press Levellers | 7 |
| 41 | Compression Spring | 8 |
| 42 | Slide Plate for Latch | 4 |
| 43 | Latch | 2 |
| 44 | Truss Head Hex Socket Shoulder Bolt | 8 |
| 45 | Hexagon Socket Head Cap Screw | 4 |
| 46 | Short extrusion (RH LONG) | 1 |
| 47 | Reposition Wheel | 2 |
| 48 | Flat washer | 2 |
| 49 | Nylon Nut | 2 |
| 50 | Round Head Phillips Screw | 1 |
| 51 | Leg lock lever knob | 1 |
| 52 | Truss Head Phillips Shoulder Screw | 2 |
| 53 | Sprung Leg Latch | 1 |
| 54 | Extension Spring | 1 |
| 55 | Screw for Extension Spring | 1 |
| 56 | Leg (Rear) | 1 |
| 57 | T-track, RH | 1 |
| 58 | Flat head screw cross(Zinc) | 6 |
| 60 | table insert slot, rear | 1 |
| 61 | T-track Extrusion, LH | 1 |
| 62 | Leg Bracket, LH, Rear | 1 |
| 63 | Outfeed Support Bracket | 1 |
| 64 | Press Plate, Outfeed Support Bracket | 2 |
| 65 | Triton small knob | 2 |
| 66 | Short extrusion (OUTFEED) | 1 |
| 67 | Right Bracket, LH, Rear | 1 |
| 68 | Name label | 1 |
| 69 | Axel Cap, Rugged Wheel | 2 |
| 70 | Flat washer | 4 |
| 71 | Scale pointer, Rear | 1 |
| 72 | Rugged Handle Bracket | 1 |
| 73 | Hangers | 20 |
| 74 | Allen Key with Ball Head | 1 |
| 100 | Fence Clamp | 4 |
| 300 | Switchbox Assy | 1 |
| 400 | Clamping Module | 1 |
