Philips H7 CANbus H7-LED Installation Guide

Before Installation

Ensure vehicle lights are turned OFF. ⚙️ (OFF)

Illustration shows a car light switch symbol with a warning triangle and two rotary dials labeled "OFF".

Step 1: Prepare the Adapter Housing

Open or close the adapter housing by rotating it. ↺

Illustration shows a circular component with a rotational arrow.

Step 2: Modify the Cover

For Hard Covers: Drill a Ø26mm hole.

Illustration shows a drill bit (Ø26mm) and a drill.

For Soft Covers (e.g., rubber grommets):

Draw a 25mm circle on the cover. ✏️
Cut a cross shape inside the circle with a knife. ?
Cut out the 25mm circle using scissors. ✂️

Illustrations show drawing a circle, cutting a cross, and cutting out a circle from a soft cover.

Step 3: Connect the Adapter

Connect the adapter cable to the LED bulb connector. ↑

Connect the CANbus adapter to its cable. ↑

Illustration shows cables being connected between the adapter, a component (likely LED bulb), and the CANbus adapter unit.

Step 4: Install the Adapter

Insert the adapter into the housing. →

Secure the adapter, possibly by rotating a locking mechanism. ↻

Illustrations show the adapter being placed into a housing and then secured.

Step 5: Route and Secure Cables

Route cable 'a' (wire) and cable 'b' (adapter cable) as shown.

Secure the cables to a suitable surface.

Illustration shows routing two cables and securing them to a vehicle component.

Safety Precautions:

Wear eye protection. ?
Beware of hot surfaces. ?
Wear protective gloves. ?
Observe prohibited areas/actions. ?

Step 6: Final Check

Ensure the adapter is properly connected and secured. The rotary dials should indicate "ON". ⚙️ (ON)

Illustration shows rotary dials labeled "ON" and settings like "0 1000".

This adapter is designed to prevent dashboard warning lights (e.g., bulb failure) when installing LED bulbs. ?

Illustration shows a steering wheel symbol with a crossed-out light bulb and warning triangle, followed by a thumbs-up symbol.

Warranty and Trademarks

Lumileds is the warrantor of this product.

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.

	Philips CANbus Adapters for LED Upgrade: Enhanced Safety and Performance Discover Philips CANbus Adapters (18960X2) for a seamless LED headlight upgrade. Prevent dashboard errors, flickering, and dimming with this 3-in-1 solution, ensuring reliable performance and easy installation.
	Philips LED Upgrade Car Compatibility List A comprehensive guide to Philips LED upgrade bulbs, detailing compatibility across various car models and providing technical specifications for Ultinon Pro9000, Ultinon Pro5000, and Ultinon Essential ranges.
	Philips CANbus-adaptere: Løsning til LED-opgradering i biler Opdag Philips CANbus-adaptere, designet til problemfri LED-opgradering i biler. Undgå falske advarsler, flimmer og lysfejl med denne 3-i-1-løsning for pålidelig ydeevne og nem installation.
	Philips CANbus Adapters for LED Upgrade Discover Philips CANbus Adapters, a 3-in-1 solution for automotive LED headlight upgrades. Prevent dashboard errors, flickering, and dimming with easy-to-install, reliable, and EMC-compliant adapters.
	Philips Adapter K for H7-LED Headlights Installation Guide A comprehensive guide detailing the installation process for the Philips Adapter K, a component designed to facilitate the upgrade of vehicle headlights to H7-LED technology. Includes safety precautions and step-by-step instructions.
	Philips H7-LED Adapter Ring L Installation Guide Step-by-step instructions and safety information for installing the Philips H7-LED Adapter Ring L, designed for automotive headlight upgrades.
	Philips H7-LED Adapter Ring P/E Installation Guide Comprehensive installation guide for Philips H7-LED Adapter Rings (Type P/E), detailing safety precautions, step-by-step assembly, and compatibility information for automotive use.
	Philips Ultinon Access H7/H18 LED Bulbs: Quick Installation, Enhanced Lighting Discover Philips Ultinon Access LED bulbs for your vehicle. Offering quick plug-and-play installation, superior beam performance, and long-lasting durability for improved visibility and a modern look. Upgrade your headlights with advanced LED technology.