Philips Adapter K for H7-LED Headlights

Safety Precautions

Adherence to safety guidelines is paramount during the installation process:

• ⚠️ Ensure the vehicle's ignition and all electrical systems are turned OFF before commencing work. [power-off-indicator]
• [hot-surface-warning] Allow the headlight assembly and surrounding components to cool down completely before touching them, as they may be hot from recent operation.
• [eye-protection-recommended] Always wear protective eyewear to safeguard your eyes from dust or debris.
• [gloves-recommended] Wearing protective gloves is advised to prevent contact with hot surfaces or sharp edges.

Installation Procedure

Follow these detailed steps for a successful installation:

1. Step 1: Preparation Confirm that the vehicle's lighting system is powered down.
2. Step 2: Access Headlight Housing Remove any protective covers or dust caps from the headlight housing to gain access to the bulb.
3. Step 3: Disconnect Old Bulb Wiring Carefully disconnect the electrical connector from the existing halogen bulb.
4. Step 4: Remove Old Bulb Detach the old bulb from its socket.
5. Step 5: Attach Adapter to LED Bulb Connect the Philips Adapter K to the base of the H7-LED bulb. Ensure it is securely fitted, often with a click or locking mechanism.
6. Step 6: Insert LED Bulb Assembly Position the H7-LED bulb, now fitted with the Adapter K, into the headlight housing socket.
7. Step 7: Secure LED Bulb Assembly Lock the LED bulb and adapter into the housing. This typically involves a twisting motion or engaging retaining clips.
8. Step 8: Reconnect Wiring Connect the electrical connector of the H7-LED bulb to the vehicle's wiring harness.
9. Step 9: Install Housing Seal/Cap Reinstall any protective seals or caps onto the headlight housing to ensure it is properly sealed against moisture and dust.
10. Step 10: Final System Check Turn the vehicle's ignition and headlights ON. Verify that the new H7-LED bulbs are functioning correctly. Check the dashboard for any warning indicators ⚠️, information ℹ️, or confirmation ?.

Additional Information and Legal Compliance

For detailed information regarding the street legality and specific vehicle compatibility of Philips LED automotive lighting, please consult the following resource:

https://www.philips.de/LED-Strassenzulassung

This website provides crucial details for ensuring compliance with local regulations.

Legal and Warranty Information

Lumileds serves as the warrantor for this product. The Philips brand name and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V., utilized under license. © 2021 Lumileds Holding B.V. All rights reserved.

Lumileds ist der Garantiegeber für dieses Produkt. Philips und das Philips Wappen sind eingetragene Marken von Koninklijke Philips N.V. und werden unter Lizenz verwendet. © 2021 Lumileds Holding B.V. Alle Rechte vorbehalten.