HUION WH1409 V2 Wireless Graphics Tablet User Manual

Precautions

1. Please read this manual carefully before using, and keep it well for future reference.
2. Before cleaning the tablet, please unplug the power cord and wipe with a soft damp cloth; do not use any kind of detergents.
3. Do not expose this product to water or other liquids. Take care to never spill liquids onto the tablet and pen. Exposing this product to water or other liquids may cause product malfunction or electrical shock.
4. Do not place the tablet on an unstable surface or at a height easily reachable by children to avoid danger. Prevent children from swallowing the pen nib or side switch. The pen nib, side switch, or other movable parts may accidentally be pulled out if children are biting on them.
5. Power off your tablet in locations where electronic devices are not allowed. Because the tablet may cause other electronic devices to malfunction in some locations where the use of electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet.
6. To protect your tablet and save power, please switch off the power when it is not in use.
7. Do not disassemble the tablet and pen. Do not disassemble or otherwise modify the tablet or pen. Such action may cause heat generation, ignition, electronic shock, or other damage, including human injury. Disassembling the product will void your warranty.
8. While getting components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. Unauthorized component replacement might cause fire, electric shocks, or other dangers.
9. Do not insert foreign material into the USB port or any other opening of this product. If a metal object or foreign material is inserted into a port or other opening, it may cause the product to malfunction or burn out, or cause electronic shock.
10. The nib of the digital pen can't be pressed when it is placing, otherwise the pen can't enter the power-saving state, which is easy to cause lithium battery over-discharge damage.

Product Overview

Tablet Introduction

Thanks for choosing the HUION® WH1409 V2 wireless graphics tablet. This is a new generation of professional battery-free drawing tablet, which can greatly improve your work efficiency in painting and creation, and is full of fun. You can freely paint and write, depicting different lines and colors, just as the pen writes on paper, bringing you a real, immersive experience.

To give you a better understanding and usage of your tablet, please read this user manual carefully. The user manual primarily shows information for Windows; unless otherwise specified, this information applies to both Windows and Macintosh systems.

Product and Accessories

Graphics Tablet

FRONT VIEW: The tablet's front surface is shown, featuring the active Working Area. Key components labeled are: Micro USB port, Power Switch, LED Indicator, and Press Keys.

REAR VIEW: The tablet's underside is shown. Key components labeled are: Anti-slip Mats, Name plate, and the slot for the Wireless Receiver.

Wireless Receiver

A small USB device with a wireless symbol and indicator lights, used to connect the tablet wirelessly to a computer.

Other Accessories

• Digital Pen: A stylus with side buttons and a replaceable nib.
• Pen Holder: A stand for storing the digital pen.
• Replacement Nibs: Spare nibs for the digital pen.
• Quick Start Guide: A brief guide to get started.
• Micro USB Cable: Used for charging the tablet and for wired connection to a computer.
• Pen Nib Clip: A tool used to help replace the pen nib.

Tablet Connection

Wired Mode Connection

Connect the tablet to your computer using the provided USB cable. A diagram illustrates a graphics tablet connected to a laptop via a USB cable.

Wireless Mode Connection

1. Insert the wireless receiver into your computer's USB port.

2. Toggle the power switch on the tablet to the left to turn it on.

3. If not used for 15 minutes, the tablet will enter sleep mode. To wake it up, toggle the switch right, then left.

A diagram illustrates inserting the wireless receiver into a computer's USB port, showing a wireless connection symbol between the receiver and the tablet.

Driver Installation

OS Support

Windows 7 or later, macOS 10.12 or later.

Install Driver

Download the driver from the official website: www.huion.com/download.

After installation, a driver icon will appear in the system tray. When the tablet is connected to the computer, the icon changes color, indicating that the driver has successfully recognized the tablet and it is ready for use.

Notice:

1. Before installing, uninstall any other drivers for similar products, including any previous drivers for this product.
2. Before installing, close all graphics software and anti-virus software to avoid potential errors.

Pen Nib Replacement

The pen nib wears out after prolonged use and needs to be replaced. Diagrams show the process: 1. Insert the pen nib into the pen nib clip. 2. Twist the pen nib to remove it. 3. Insert a new nib and twist to secure it.

Product Basic Operation

Using The Pen

Hold the pen

Hold the pen as you would a normal pen or pencil. Adjust your grip to easily toggle the side switch with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen.

Notice: When not in use, place the pen in its case or on the desk. Do not place the pen on the screen surface, as this may interfere with other screen cursor positioning equipment or prevent your computer from entering sleep mode.

Position the cursor

Move the pen slightly above the active area without touching the screen surface; the cursor will move accordingly. Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it with sufficient pressure, to register a click.

Diagrams show the pen hovering above the tablet, causing the cursor to move on the computer screen. Another diagram shows the pen tip tapping the screen, resulting in a click action.

Click

Tap the pen tip once on the screen to register a click. Tap to highlight or select an item on the screen, and double-click to open it.

Diagrams illustrate the pen tapping the screen to perform a click action on the computer display.

Move

Select an object, then slide the pen tip across the screen to move it.

Diagrams show the pen being used to drag and move an object across the computer screen.

Use the side buttons

The buttons on the pen can be set to two different customizable functions. You can use these buttons whenever the pen tip is within 10mm of the tablet's active area. You do not need to touch the pen tip to the tablet to use the switch.

Diagrams show the pen's side buttons being pressed, triggering actions on the computer display.

Using the Tablet

Power Switch

1. The power switch is located on the top left side of the tablet. Turn it on before using the tablet in wireless mode.

2. When not using the tablet for 15 minutes, or when the switch is toggled off, it will enter sleep mode.

3. LED Indicator:

• ✍️ [Pen Symbol]: Pen or press key working
• ? [Wireless Symbol]: Wireless Mode
• ⚡ [Charging Symbol]: Tablet in charge; light is off when fully charged
• ? [Low Battery Symbol]: Low voltage

Press Keys

There are 12 press keys on the left side of the tablet. You can set their functions via the driver interface according to your preferences, which will help improve your work efficiency.

Charging the Tablet

1. Before using the tablet for the first time in wireless mode, fully charge the tablet battery. Connect the USB cable between the tablet and a primary USB port on your computer, or a powered USB port.

2. The USB cable is used for charging the battery and for operating the tablet as a wired USB tablet. The battery will charge whenever the USB cable is connected and the battery is not fully charged.

3. It takes approximately 7 hours to fully charge an empty battery. The actual charge time depends on the current battery level and tablet usage while charging. The battery status indicator shows RED when charging and will be OFF when fully charged.

4. Whenever the tablet is connected to the computer with a USB cable, the wireless mode will be disabled.

A diagram shows the tablet connected via a USB cable to a laptop, illustrating the charging process and connection ports.

Function Setting

Device Connection Prompt

1. Device disconnected: The computer does not recognize the tablet.

2. Device connected: The computer has recognized the tablet.

Screenshots of the Huion driver interface display the 'Device disconnected' and 'Device connected' states, with sections for Press keys, Digital Pen, Work Area, and About.

Working Area Setting

Using Multiple Monitors

Select the 'Working Area' tab to define the relationship between pen movement on the tablet and cursor movement on the monitor screen. By default, the entire active area of the tablet maps to the entire monitor. If multiple monitors are in use and you are in extended mode, choose the related monitor on the driver interface to map to. If your monitors are in mirror mode (all display the same content), the tablet maps to the entire space on each monitor, and the screen cursor is displayed on each monitor simultaneously.

A screenshot of the Huion driver's 'Work Area' settings is shown, allowing selection of the current display (e.g., Display 1), setting the mapping to 'Full Screen Area', 'Screen Ratio', or 'Custom Area' using coordinate inputs (Left, Right, Up, Down). It also includes 'Rotate settings' options (0°, 90°, 180°, 270°).

Working Area Setting

Define the tablet area that will be mapped to the screen area. 'Full Area' uses the entire active area of the tablet, which is the default setting. 'Customized Area' allows you to enter coordinate values or drag the corners of the foreground graphic to select the screen area.

Two screenshots illustrate the 'Work Area' settings: one showing 'Full Area' selected, and another demonstrating how to select a 'Custom Area' by dragging the corners of a graphic representation.

Rotate Working Area

Change the direction of the tablet to adapt to left or right-hand operation. You can rotate the tablet by 0°, 90°, 180°, or 270°.

Screenshots show the 'Rotate settings' options within the 'Work Area' tab, allowing selection of different orientations.

Press Keys Function Setting

Default Setting: Place the cursor on a press key or click it to find its default value.

Customized Setting: Select the desired function from the pop-up dialog box, then click APPLY or OK to take effect.

Enable/Disable Press Keys: Check or uncheck the 'Enable Press Keys' option.

A screenshot of the Huion driver's 'Press keys' settings is displayed, showing the option to 'Enable Press Keys' and a list of customizable keys with example assignments like 'Ctrl+Z'.

Pen Buttons Function Setting

Select the function to be achieved from the pop-up dialog box, then click APPLY or OK to take effect.

A screenshot of the Huion driver's 'Digital Pen' settings is shown, allowing customization of pen buttons with options such as 'Mouse Right Button', 'Switch Brush', 'Enable Windows Ink', and 'Mouse Mode'.

Pressure Sensitivity Setting

Pressure sensitivity is adjusted by dragging the slider up and down. A lower value results in higher pressure sensitivity.

A screenshot displays the 'Pressure Sensitivity Adjustment' graph within the Huion driver, featuring a slider for adjusting sensitivity.

Pen Pressure Testing

Click 'start pressure test' to gradually apply pressure to the stylus on the screen to test the pressure level. Click the 'Clear' button to clear all the ink displayed.

A screenshot shows the Huion driver's 'Pen Pressure Testing' interface, including 'start pressure test' and 'Clear' buttons.

Enable the Windows Ink feature

Microsoft Windows provides extensive support for pen input. Pen features are supported in applications such as Microsoft Office, Windows Journal, Adobe Photoshop CC, and SketchBook 6.

A screenshot of the Huion driver's 'Digital Pen' settings highlights the 'Enable Windows Ink' checkbox.

Data Export and Import

The driver supports exporting and importing your custom configuration data for the product, which is convenient for using different software and avoids the trouble of repeated settings.

A screenshot shows 'Export', 'Import', and 'Default Setting' buttons within the Huion driver interface, along with company information.

Specifications

Pen Tablet

Stylus Pen

Trouble Shooting

Possible Breakdowns Related to TABLET

Possible Breakdowns Related to SYSTEM

CE and FCC Notice

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used with this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

This device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

1. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
2. The product shall only be connected to a USB interface of version USB 2.0.
3. The device complies with RF specifications when the device is used at 0mm from your body.

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: G10T (FCC ID: 2AFEJ-H16WT) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.188W/kg and when properly worn on the body is 1.342W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Body-worn Operation: This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.