User Manual

Precautions

• Please read this manual carefully before using, and keep it well for future reference.
• Before cleaning the tablet please unplug the power cord and wipe with a soft damp cloth, do not use any kind of detergents.
• Do not expose this product to water or other liquids. Take care to never spill liquids onto the tablet and pen. Exposing this product to water or other liquids may cause product malfunction or electrical shock.
• Do not place the tablet on where is unstable or a height for children reaching easily in order to avoid danger. Prevent children from swallowing the pen nib or side switch. The pen nib, side switch, or other movable parts may accidentally be pulled out if children are biting on them.
• Power off your tablet in locations where/when electronic devices is not allowed. Because the tablet may cause other electronic devices to malfunction in some locations where/when the use of electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet.
• Do not disassemble the tablet and pen. Do not disassemble or otherwise modify the tablet or pen. Such action may cause heat generation, ignition, electronic shock, or other damage, including human injury. Disassembling the product will void your warranty.
• While getting the components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. Unauthorized component replacement might cause fire, electric shocks or other dangers.
• Do not insert foreign material into the USB port or any other opening of this product. If a metal object or foreign material is inserted into a port or other opening of this product it may cause the product to malfunction or burn out, or cause electronic shock.

Contents

1. Product Overview........................................................................................................................... 3
2. Tablet Introduction................................................................................................................3
3. Product and Accessories....................................................................................................... 3
4. Connecting to Computer.......................................................................................................4
5. Connecting to Android Phone...............................................................................................5
6. Driver Installation.................................................................................................................. 5
7. Pen Nib Replacement............................................................................................................ 6
8. Product Basic Operation.................................................................................................................7
9. Using The Pen........................................................................................................................ 7
10. Driver Setting.................................................................................................................................. 9
11. Device Connection Prompt................................................................................................... 9
12. Working Area Setting............................................................................................................ 9
13. Press Keys Function Setting.................................................................................................11
14. Pen Buttons Function Setting..............................................................................................11
15. Pressure Sensitivity Setting................................................................................................. 12
16. Pen Pressure Testing............................................................................................................12
17. Enable the Windows Ink feature.........................................................................................13
18. Data Export and Import.......................................................................................................13
19. Specifications................................................................................................................................ 14
20. Trouble Shooting...........................................................................................................................15
21. Possible Breakdowns Related to TABLET............................................................................ 15
22. Possible Breakdowns Related to SYSTEM........................................................................... 15
23. After-service Contact....................................................................................................................15

1. Product Overview

1.1 Tablet Introduction

Thanks for choosing HUION® HS611 creative pen tablet. This is a new generation of professional battery-free drawing tablet, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely painting and writing, depicting different lines and colors, just as the pen writes on the paper, which brings you a real shock experience.

To give you a better understanding and using of your tablet, please read this user manual carefully. The user manual only shows the information under Windows, unless otherwise specified, this information applies to both Windows and Macintosh systems.

1.2 Product and Accessories

1.2.1 Graphics Tablet

A drawing tablet with labeled parts: Touch Bar, Press Keys (K1-K10), LED Indicator, Working Area (258.4 x 161.5mm), Anti-slip Mats, Nameplate, and a USB-C port. The Touch Bar includes controls for Silence, Volume Down, Volume Up, Previous, Pause/Play, Next, Program Switch, and Desktop.

1.2.2 Packing List

• Digital Pen
• Replacement Nibs (located inside the pen holder)
• Pen Holder
• USB-C Cable
• Quick Start Guide
• Warranty Card

1.3 Connecting to Computer

1.3.1 Wire Access Mode

Connect the tablet to your computer with USB cable.

A laptop computer is shown connected to the HUION HS611 drawing tablet via a USB-C cable.

1.4 Connecting to Android Phone

1. Please make sure your phone/tablet OS is as following: Android OS 6.0 or later
2. For some models, you need to go phone/tablet "Settings" then enable "OTG" function.
3. Choose the right OTG Adapter from package, which depends on USB port type of your phone/tablet, insert the wireless receiver into the OTG adapter, and then insert the OTG adapter into the mobile phone interface. At this time, turn on the tablet switch to communicate with the mobile phone through 2.4G wireless.

A smartphone is shown connected to the HUION HS611 drawing tablet using a USB-C cable and an OTG adapter. The tablet's press keys (K1-K10) are visible.

Notes:

• The phone will reverse charge the tablet when they are wired connected and will quickly drain the phone battery, so it can only be used by wireless connecting to the phone.
• The pen tablet can works without installing any driver into your phone/tablet.
• Once connected, the tablet will automatically enter phone mode, in which the pen can only work in the left gray area(166.7x104.2mm).
• Please note that the press keys of pen tablet and digital pen are not supported in phone mode.

1.5 Driver Installation

1.5.1 OS Support

Windows 7 or later, macOS 10.12 or later

1.5.2 Install Driver

Please download the driver from our website: www.huion.com/download

After finishing installation, you can find the driver icon in the system tray area, which means the driver was installed successfully; when you connect the tablet to computer, the icon will change to a colored state, which means the driver has already recognized the tablet and you can start using it now.

Notice:

• Before installing, you need to uninstall other driver of similar products, including the old driver of this product.
• Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistake.

1.6 Pen Nib Replacement

The nib will be wear off after using for a long time, then you need to replace a new nib.

Diagram 1: A pen holder with a cap being unscrewed counter-clockwise to access replacement nibs.

Diagram 2: A pen nib being inserted into the bottom hole of the pen holder and tilted to pull out the old nib.

Diagram 3: A new pen nib being inserted straight into the pen tip until it stops.

2. Product Basic Operation

2.1 Using The Pen

2.1.1 Hold the pen

Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen.

A hand is shown holding a stylus pen like a normal pen or pencil, with the thumb positioned near the side switch.

Notice: When not in use, place the pen in the pen case or on the desk. Do not place the pen on the surface of screen, which may interfere with the use of other screen cursor positioning equipment, may also cause your computer can not enter the sleep mode.

2.1.2 Position the cursor

Move the pen slightly above the active area without touching the screen surface, the cursor will move to the new position accordingly.

Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.

Diagram: A stylus hovering slightly above the tablet surface, showing the cursor moving on a computer screen. A second diagram shows the pen tip tapping the tablet surface to make a selection.

2.1.3 Click

Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item on the screen and double-click to open it.

Diagram: Similar to the cursor positioning diagram, showing a tap action on the tablet surface and the resulting click on the computer screen.

2.1.4 Move

Select the object, then slide the pen tip across the screen to move it.

Diagram: A stylus selecting an object on the tablet and dragging it across the screen, showing the object moving on the computer display.

2.1.5 Use the side buttons

The buttons on the pen can be set to two different customized functions. You can use the buttons whenever the pen tip is within 10mm of the tablet active area. You do not have to touch the pen tip to the tablet in order to use the switch.

Diagram: A stylus with its side buttons highlighted, showing the pen tip near the tablet surface, indicating button activation.

3. Driver Setting

3.1 Device Connection Prompt

1. Device disconnected: The computer does not recognize the tablet.

2. Device connected: The computer has recognized the tablet.

Diagrams show the driver interface indicating "Device disconnect" and "Device connected" states.

3.2 Working Area Setting

3.2.1 Using Multiple Monitors

Select the Working Area tab to define the relationship between pen movement on the tablet and cursor movement on the monitor screen. By default the entire active area of tablet maps to the entire monitor. If more than one monitor is in use and you are in extended mode, you need to choose the related monitor on the driver interface which you are going to map to. If your monitors are in mirror mode (All monitors display the same content), the tablet maps to the entire space on each monitor and the screen cursor is displayed on each monitor simultaneously.

The driver interface shows display selection options (Display 1, Display 2, All Display) and area mapping options (Full Screen Area, Full Area, Screen Ratio, Custom Area).

3.2.2 Working Area Setting

Define the tablet area that will be mapped to the screen area. 1. Full Area: the entire active area of the tablet. This is the default setting. 2. Customized Area: 1.> Enter coordinate values. or 2>. Drag the corners of the foreground graphic to select the screen area.

The "Working Area Setting" interface displays options for "Full Area" and "Custom Area" with coordinate inputs.

3.2.3 Rotate Working Area

By changing the direction of the tablet to adapt to the left and right hand operation. You can rotate the tablet by 0°, 90°, 180° or 270°.

The "Working Area Setting" interface shows rotation options (0°, 90°, 180°, 270°).

3.3 Press Keys Function Setting

Default Setting: Place the cursor on the press key or click the press key to find the default values. Customized Setting: Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect. Enable/Disable Press Keys: Check/Uncheck "Enable Press Keys". Enable/Disable Touch: Check/Uncheck "Enable Touch".

The driver interface shows "Press keys" settings, with checkboxes for "Enable Press Keys" and "Enable Touch".

3.4 Pen Buttons Function Setting

Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect.

The driver interface shows "Digital Pen" settings, with options like "Mouse Right Button", "Enable Windows Ink", "Mouse mode", "Game Mode".

3.5 Pressure Sensitivity Setting

The pressure sensitivity will be changed by dragging the slider up and down, the smaller the value, the more pressure sensitive.

The driver interface shows "Pressure Sensitivity Adjustment" with a graph and a slider.

3.6 Pen Pressure Testing

Click "start pressure test", you can gradually apply pressure to the stylus on the screen to test the pressure level. Click "Clear" button to clear all the ink.

The driver interface shows "Pressure Test" with a "Start Pressure Test" button and a "Clear" button.

3.7 Enable the Windows Ink feature

Microsoft Windows provides extensive support for pen input. Pen features are supported in such as Microsoft Office, Windows Journal, Adobe Photoshop CC, SketchBook 6 and so on.

The driver interface shows a checkbox for "Enable Windows Ink".

3.8 Data Export and Import

The driver supports exporting and importing your custom configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings.

The driver interface shows "Export", "Import", and "Default Setting" buttons, with a background image promoting creativity.

4. Specifications

Creative Tablet

Digital Pen

5. Trouble Shooting

5.1 Possible Breakdowns Related to TABLET

5.2 Possible Breakdowns Related to SYSTEM

6. After-service Contact

Information in this manual is subject to change without further notice. For more information, please contact HUION with their email: service@huion.com Or go to their website (www.huion.com) to get the latest driver and user manual.