Huion Kamvas 13 User Manual
For Windows and Macintosh OS
Model: GS1331
Precautions
- Please read this manual carefully before using, and keep it well for future reference.
- Before cleaning the display, please unplug the USB cable and wipe with a soft damp cloth; do not use any kind of detergents.
- Please do not place the display near water sources such as bathtubs, washbasins, sinks, washing machines, damp basements, or swimming pools, etc.
- Do not place the display on an unstable surface or at a height where children can easily reach it, in order to avoid danger.
- Do not place the display and digital pen close to magnetic fields.
- The grooves and holes on the back case are designed for ventilation to prevent the monitor from overheating. Please do not place the display on beds, sofas, carpets, or in embedded devices.
- Only power supplies shown on the nameplate can be used for the display. If you have questions about the power supply you are using, please consult the distributor of your display.
- To protect your display, please switch off the power when it is not in use. During blackouts or when not using for a long time, please unplug the display from the socket.
- Do not overload the socket or lengthen the power wire, which may lead to electric shocks.
- Make sure no foreign bodies get inside the monitor through the grooves and prevent liquid from splashing on the display to prevent short-circuit or fire.
- If the display has a breakdown, do not open the main case and try to repair it yourself. Please ask for service for proper repair and maintenance.
- When the following situations occur, please unplug the power adapter and you may need a service for full repair and maintenance:
- A. The power wire or plug is damaged or worn out;
- B. There is liquid splashed inside of the display;
- C. The display has fallen or the LCD is broken;
- D. When obvious abnormalities occur to the display.
- While getting components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. Unauthorized component replacement might cause fire, electric shocks, or other dangers.
Product Overview
Display Introduction
Thanks for choosing HUION® KAMVAS® 13 Pen display. This is a new generation of portable desktop-level professional drawing display, which can greatly improve your work efficiency of painting and creation, and full of fun. You can freely paint and write, depicting different lines and colors, just as the pen writes on the paper, which brings you a real shock experience.
To give you a better understanding and usage of your KAMVAS display, please read this user manual carefully. The user manual only shows the information under Windows; unless otherwise specified, this information applies to both Windows and Macintosh systems.
Product and Accessories
Product Overview
Diagram showing the layout of the Huion Kamvas 13 pen display. It includes labels for the Power Button, Press Keys (K1-K8), Function Button, Working Area, Anti-slip Mats, and Nameplate. Connection ports are indicated as 3-in-1 USB-C and USB-C to USB-C.
3-in-1 Connection Cable
Diagram illustrating the 3-in-1 connection cable with four labeled connectors: 1. USB, 2. HDMI, 3. Power (Red USB Port), 4. Type-C.
Display Stand (Optional)
The display stand is designed to adjust the angle of the KAMVAS display according to your usage habit, making painting and creating more comfortable.
Other Accessories
- Digital Pen
- Pen Holder
- Pen Nibs
- Nib Clip
- USB Extension Cable
- 3-in-1 Cable
- Stand (Optional)
- Cleaning Cloth
- Glove
- Quick Start Guide
Connecting to Computer
Connected with 3-in-1 Cable
Generally, the device can be powered on when the black USB-A cable is connected to your computer. A flashing screen of the device may indicate a low battery. In such cases, you are suggested to connect the red colored USB-A cable to another USB interface on your computer or a power adapter. The power adapter is not included in the package and requires extra cost. A power adapter for your mobile phone is also compatible.
Connected with USB-C to USB-C Cable
A USB-C to USB-C cable is not included in the package and requires extra cost. Please purchase the cable through official channels, as it is customized, and cables from unknown sources may not be usable with the device.
Driver Installation
OS Support
Windows 7 or later, macOS 10.12 or later.
Install via Download
Please download the driver from our website: www.huion.com/download.
After finishing installation, you can find the driver icon in the system tray area, which means the driver was installed successfully. When you connect the tablet to your computer, the icon will change color [color indicator], which means the driver has already recognized the tablet, and you can start using it now.
Notice:
- Before installing, you need to uninstall other drivers of similar products, including the old driver of this product.
- Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistakes.
Connecting to Android Phone/Tablet
As shown in the figure, connect your Android phone and pen display with a USB-C to USB-C USB 3.1 Gen1 cable, and connect the pen display and the power adapter or power bank with a USB-C to USB-A cable.
Note:
- USB-C to USB-C cable and USB-C to USB-A cable are not included in the package and require extra cost. Please purchase the cable through official channels, as it is customized, and cables from unknown sources may not be usable with the device.
- The power adapter is not included in the package and requires extra cost. A power adapter for your mobile phone is also compatible.
- Please make sure your smart Android phone supports Dex or PC mode.
Pen Nib Replacement
The nib will wear out after using for a long time, then you need to replace it with a new nib.
Diagram showing three steps for pen nib replacement: 1. Insert the pen nib into the hole of the pen holder and tilt it. 2. Pull out the used nib. 3. Insert the new nib into the pen.
Product Basic Operation
Using The Pen
Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the side switch easily with your thumb or forefinger. Be careful not to accidentally press the switch while drawing or positioning with the pen.
Notice: When not in use, place the pen in the pen case or on the desk. Do not place the pen on the surface of the screen, which may interfere with the use of other screen cursor positioning equipment, and may also cause your computer unable to enter sleep mode.
Position the cursor
Move the pen slightly above the active area without touching the screen surface; the cursor will move to the new position accordingly. Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or touch it to the screen with enough pressure to register a click.
Diagram illustrating cursor movement: A pen hovers over the display, and the cursor moves on the computer monitor. Another diagram shows a pen tip tapping the screen.
Click
Use the pen tip to tap on the screen once to produce a click. Tap to highlight or select an item on the screen and double-click to open it.
Move
Select the object, then slide the pen tip across the screen to move it.
Use the side buttons
The side buttons of the pen can be set to two different customizable functions. You can use the buttons whenever the pen tip is within 10mm of the display active area. You do not have to touch the pen tip to the display in order to use the switch.
Using the Display
Power Button
The power button is located on the left side of the digital screen. You need to turn on the power switch before using.
Press Keys
There are 8 press keys on the top left side of the display, which you can modify the functions according to your own habits, thus helping to improve your work efficiency.
OSD Function
Enter OSD Menu:
- Press K4 & K5 for around three seconds until the OSD menu appears and the indicator flashes green. The functions of K2, K3, K6, K7 will become OSD functions.
- In the menu, the functions of K2, K3, K6, K7 will be as follows:
- K2 AUTO: Before entering the menu, its function is auto adjustment. After entering the menu, its function is back to [Previous Menu].
- K3 MENU: Press to call up the menu. After entering the menu, its function is [Confirm].
- K7 - : After entering the menu, its function is [Down/Left/Decrease].
- K6 + : After entering the menu, its function is [Up/Right/Increase].
Exit OSD Menu:
Press K4 & K5 again for around three seconds until the OSD menu disappears. The functions of K2, K3, K6, K7 will revert to shortcut functions.
Function Setting
Device Connection Prompt
1. Device disconnected: The display hasn't connected to your computer.
2. Device connected: The display has already connected to your computer.
Diagrams showing the Huion Tablet driver interface with "Device disconnected" and "Device connected" status indicators.
Working Area Setting
Using Multiple Monitors
When the KAMVAS Display and other monitors are used in the same system, the movement of the screen cursor on the standard display depends on the system configuration. If the secondary display is a mirrored mode connection, this display and another monitor will show exactly the same image and screen cursor movement. If you are in the extended display mode, you need to set the display on the driver to map which portion of the display screen your KAMVAS will use.
Working Area Setting
Define the display area that will be mapped to the screen area.
- Full Area: the entire active area of the Display. This is the default setting.
- Same Ratio with LCD.
- Customize Area: 1. Enter coordinate values. or 2. Drag the corners of the foreground graphic to select the screen area.
Diagrams showing the Huion Tablet driver interface for "Working Area Setting", illustrating options like "Full Area", "Screen Ratio", "Custom Area" with input fields for coordinates, and monitor selection.
Rotate Working Area
By changing the direction of the display, you can adapt it to left and right-hand operation. Four directions of choice are provided.
Diagrams showing the Huion Tablet driver interface with "Rotate settings" options: 0°, 90°, 180°, 270°.
Press Keys Function Setting
Default Setting: Place the cursor on the button or click the button icon to see the default values for the press keys.
Customized press Keys: Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect.
Touch Bar: You can slide up and down to achieve zoom function.
Enable/Disable Press Key: [Checkbox] to check/uncheck "Enable Press key".
Diagram showing the Huion Tablet driver interface with options for "Enable Press Keys", "Enable Soft Keys", and "Enable Touch".
Pen Button Setting
Select the function to be achieved on the pop-up dialog box, then click APPLY or OK to take effect.
Diagram showing the Huion Tablet driver interface with options for customizing pen buttons, such as "Mouse Right Button", "Switch Brush", "Enable Windows Ink", "Game Mode".
Pressure Sensitivity Setting
The pressure sensitivity will be changed by dragging the slider up and down. The smaller the value, the more sensitive the pressure.
Diagram showing the Huion Tablet driver interface for "Pressure Sensitivity Adjustment", including a graph and slider for adjustment.
Pen Pressure Testing
You can gradually apply pressure to the stylus on the screen to test the pressure level. Click the "Clear" button to clear all the ink.
Diagram showing the Huion Tablet driver interface for "Pressure Sensitivity Adjustment" with a "Pressure Test" area and a "Clear" button.
Calibration
Screen Calibration: Click the red point of the cross center appearing on the screen to complete the calibration.
Restore Factory Settings: Click "Restore Default" to restore to the factory settings.
Cancel Calibration: Click "Cancel calibration" or press ESC on the keyboard to cancel the calibration.
Diagram showing the calibration interface with options to "Start Calibration", "Restore default", and "Cancel Calibration".
Enable the Windows Ink feature
Microsoft Windows provides extensive support for pen input. Pen features are supported in applications such as Microsoft Office, Windows Journal, Adobe Photoshop CC, SketchBook 6, and so on.
Diagram showing the Huion Tablet driver interface with an "Enable Windows Ink" option.
Data Export and Import
The driver supports exporting and importing your customized configuration data of the product, which is convenient for you to use different software and avoid the trouble of repeated settings.
Diagram showing the Huion Tablet driver interface with "Export", "Import", and "Default Setting" buttons.
Specifications
| Specification | Details |
|---|---|
| Screen | |
| Panel Size | 13.3 inch |
| Resolution | 1920 x 1080 (16:9) |
| LCD Type | IPS LCD |
| Active Area | 293.76 × 165.24 mm |
| Contrast Ratio | 1000:1 |
| Brightness | 220 cd/m² |
| Response Time | 25 ms |
| View Angle | 89°/89°(H)/89°/89°(V) (Typ.)(CR > 10) |
| Gamut | 120% sRGB |
| Display Color | 16.7 M (8bit) |
| Touch | |
| Touch Type | Passive Electromagnetic Resonance |
| Resolution | 5080 LPI |
| Pressure Level | 8192 |
| Accuracy | ±0.5 mm (Center), ±3 mm (Corner) |
| Sensing Height | 10 mm |
| Report Rate | 266 PPS |
| Pen | |
| Model | PW517 |
| Dimension | 163.7 x Φ14.3 mm |
| Buttons | Two Customized Press Key |
| Output Voltage | 5V 2A |
| Video Interface | USB-C (3-in-1 Cable) & USB-C (USB 3.1) |
| Press Key | 8 Customized Press Key |
| General | |
| Dimension | 366.5 x 217.4 x 11.8 mm |
| Net Weight | 0.98 kg (without stand) |
| Adjustable Stand | Two Levels Stand (Optional) |
| OS Support | Windows 7 or later, macOS 10.12 or later |
Trouble Shooting
Possible Breakdowns Related to DISPLAY
| Abnormal Phenomena | Possible Solutions |
|---|---|
| Power indicator does not flash | *Make sure power is on. *Check the socket and power cable. |
| No display on the screen | 1. Make sure power is on. 2. Correctly connect the 3-in-1 cable. 3. If you connect the display with a laptop, please make sure the display is on the right display mode: extend or duplicate mode. 4. Check whether the side indicator shows green; if not, it means no signal. Please reboot your computer or reconnect the cable. 5. Is the signal wire broken or bent? If so, please replace the signal wire. |
| Images are blurred | Please set the display resolution with 1920 x 1080. |
| Lack of colors | Check the pins of the signal wire are not bent or fractured. |
| There is chromatic aberration | As the regional color temperature is different, so minor chromatic aberration is a normal phenomenon. |
| Images jitter or ripple images appear | It is likely that there is electric equipment nearby that brings about electronic interference. |
Possible Breakdowns Related to FUNCTIONS
| Abnormal Phenomena | Possible Solutions |
|---|---|
| Pen doesn't work and no pressure in the graphics software | 1. If the driver is damaged or is not properly installed, please uninstall the driver and reinstall it. 2. Try restarting your computer. 3. Try re-inserting the USB cable. |
| Cursor movement is abnormal | Try re-inserting the USB cable or restarting your computer. |
| The side button of the pen doesn't work | When pressing the side button, please make sure that the nib didn't touch the glass surface and the distance between the nib and surface is within 10mm. |
| There is a deviation between the tip and the cursor | Try calibration. |
Creative Pen Displays & Tablets for Drawing - Huion
