Progress Lighting P710119 2-LT Wall Sconce Installation Guide
Thank you for selecting Progress Lighting. For questions regarding product information, assembly, or missing parts, please contact Progress Lighting customer service at 800-447-0573 or customerservice@progresslighting.com.
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Fixture | 1 |
| B | Fabric Shade | 1 |
Hardware Contents (not actual size)
- AA: Screw (#8-32) - Qty: 2
- BB: Wire Nut - Qty: 3
- CC: Round Mounting Plate - Qty: 1
- DD: Hex Nut (#8-32) - Qty: 2
- EE: Cylinder Nut (#8-32) - Qty: 2
Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
CAUTION: Read instructions carefully and turn electricity off at the main circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install, or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
Step 1: Prepare Mounting Plate
Loosely thread the screws (AA) and the hex nuts (DD) onto the round mounting plate (CC). Adjust the screw length according to the fixture canopy depth. Next, take the fixture down and tighten the hex nuts (DD) up against the round mounting plate (CC) until 3/16" [5mm] of threads are showing. This ensures the correct length for mounting.
Step 2: Attach Mounting Plate to Outlet Box
Attach the prepared mounting plate assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
Step 3: Wire the Fixture
Strip 3/8" of insulation from the electrical wire ends. Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box. Connect the BLACK fixture wire to the BLACK supply wire from the outlet box. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all wire connections carefully into the outlet box.
Wiring Diagram Description: A diagram shows the connection of wires: White fixture wire to White supply wire, Black fixture wire to Black supply wire, and ground wires connected together or to a green ground screw. UL-approved wire nuts are used for connections.
Step 4: Mount the Fixture
Lift the fixture to the mounting surface and pass the screws (AA) through the two mounting holes in the fixture canopy. While holding the fixture, thread the screws (AA) in or out of the round mounting plate (CC) until 3/16" of threads are showing. Using the cylinder nuts (EE), tighten the fixture against the mounting surface.
Step 5: Install Lamps and Shade
Thread the lamps (not included) into the fixture sockets. Use 60-watt MAX incandescent medium base lamp, SBCFL or SBLED. Attach the strap of the fabric shade (B) onto the bracket of the fixture (A).
Shade Attachment Diagram Description: A diagram shows how to attach the fabric shade (B) with its strap to the fixture bracket (A).
Warranty Information
Progress products are warranted to be free from defects in material and workmanship at time of shipment when properly installed and under normal conditions of use. All warranty claims must be asserted within one year from the date of purchase. Progress's sole liability is limited to repair or replacement of the product. Progress disclaims all other warranties, express or implied, including warranties of merchantability and fitness for a particular purpose. Progress shall not be liable for any incidental or consequential damages beyond the cost of the product.
