Logitech Z207 Bluetooth Computer Speakers
Complete Setup Guide
Know Your Product
The Logitech Z207 system includes two speakers and necessary accessories for setup and operation.
Left Speaker:
- Features two circular speaker drivers stacked vertically.
Right Speaker:
- Features two circular speaker drivers stacked vertically.
- Includes indicator lights (LED) [LED indicator].
- Equipped with a Bluetooth pairing button [Bluetooth button].
- Has integrated power and volume controls [volume knob].
- Provides a headphone jack [headphone jack] on the front.
Accessories:
- An AC power adapter with an attached DC power plug.
- A 3.5 mm auxiliary cable, featuring dual 3.5mm jack connectors at one end and a single 3.5mm jack connector at the other.
Connect the Speakers
- Connect the DC power plug to the rear of the right speaker and plug the AC adapter into an electrical outlet.
- Connect your source device to the 3.5 mm audio jack using the auxiliary input located on the back of the right speaker.
- (Optional) Connect your headphones to the headphone jack on the front of the right speaker.
- Turn the speaker on by using the power knob.
- To pair your devices via Bluetooth: Press the Bluetooth pairing button for approximately 3 seconds until the LED indicator begins to blink. Enable Bluetooth on your device and select "Logi Z207" to establish the connection. The LED indicator will then display a solid blue light after successful pairing.
Adjust the Volume
To increase or decrease the speaker volume, rotate the volume control knob located on the right speaker. Turn clockwise to increase volume and counter-clockwise to decrease volume.