Sunco SPEC-SELECT™ Designer Strip LED Lighting

Important Safety Information

Before installation and use, it is crucial to read all warnings and instructions provided. This includes precautions against electric shock, fire hazards, and personal injury. Professional installation by a qualified electrician is recommended, especially if unsure about electrical codes or procedures.

Key Safety Warnings:

• Always turn off power at the circuit breaker before wiring or performing maintenance.
• Verify correct supply voltage.
• Use UL approved wire connectors.
• Avoid direct eye exposure to the light source.
• Allow fixture to cool before handling to prevent burns.

Product Features & Adjustments

The Sunco SPEC-SELECT™ Designer Strip offers field-adjustable wattage and color temperature (CCT). Users can select from three CCT options (3500K, 4100K, 5000K) and three wattage settings via integrated slide switches on the LED driver, allowing for customized lighting configurations.

Installation Methods

This fixture supports multiple installation types:

• Surface Mount: Instructions detail attaching the baffle, opening the fixture, wiring, and securing it to the ceiling.
• Chain Suspended: Steps cover attaching V-hooks and chain to hang the luminaire, connecting wires, and reattaching the luminous part.
• Cable Suspended: Similar to chain suspension, this method involves V-hooks and cables for hanging.

An integrated sensor option is also available for fixtures, with instructions for installing an elbow connector and sensor.

General Information

The document includes a general wiring diagram illustrating connections to the LED driver and power source (120-277V). It also notes that dimming wires are for 0-10V IEC compliant control and specifies wire color changes for dimming control per NEMA standards.

Specifications are subject to change without notice.