VÅGDAL Connection Cord

Important Safety Instructions

? For indoor use only.

? Electrical Safety:

• Use only IKEA LED drivers suited for this product.
• The total wattage of the lamps connected to one LED driver must not exceed the maximum power stated on that LED driver.
• The total wattage must never exceed 30W.

⚠️ WARNING – Strangulation Hazard.

• NEVER place cord within reach of a child in a cot or playpen.
• ALWAYS secure cord to wall or cabinet.
• Check regularly that the cord is securely fastened.
• Pull the cord to remove any slack between fasteners.
• Tie up any remaining slack cord between driver and socket.

? General Safety:

• Regularly check the cord, transformer, and all other parts for damage. If any part is damaged, the product should not be used.
• Keep these instructions for future use.

Assembly Instructions

Components:

• 2x Connectors
• 1x Long track
• 1x Short track

1. Step 1: Mount Brackets. Attach one mounting bracket to the desired location (e.g., underside of a cabinet). A click sound [Click sound] indicates secure attachment.
2. Step 2: Mount Second Bracket and Connect Power. Attach the second mounting bracket similarly. Connect the power cord to the LED driver.
3. Step 3: Install Light Bar. Insert the VÅGDAL light bar into the mounted brackets. A protective sleeve may need to be cut and discarded.
4. Step 4: Prepare for Mounting. Peel off the adhesive backing from the light bar's mounting strip.
5. Step 5: Secure Light Bar. Align and press the light bar into the brackets.
6. Step 6: Final Check. Ensure the light bar clicks securely into place [Click sound]. ? Check the cable connection to ensure it is secure.