Assembly Instructions

Important Note

Place all parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

Before you begin, please review the assembly instruction step by step.

Return & Warranty Policy:

• Aminalife strives to offer the highest quality products and provides positive solutions with replacements or refunds if needed.
• If the item is damaged or defective, please take photos to show the problem and email the seller.
• Please do not return products before contacting the seller.

Part Lists

Box 1: N711P244890

D (2 PCS)

E (2 PCS)

F (1 PC)

G (4 PCS)

H (1 PC)

I (2 PCS)

J (2 PCS)

K (2 PCS)

L (2 PCS)

M (2 PCS)

N (2 PCS)

O (1 PC)

Q (1 PC)

X (2 PCS)

Z (2 PCS)

W (8 PCS)

Box 2: N711P244891

A (1 PC)

B (1 PC)

C (4 PCS)

P (2 PCS)

R (4 PCS)

Hardware List: N711P244891

1: Washer (ø16*1: 94 PCS)

2: Screw (M6x20: 66 PCS)

3: Screw (M6x30: 18 PCS)

4: Screw (M6x40: 40 PCS)

5: Screw (M6x55: 2 PCS)

6: Washer (ø23*1: 8 PCS)

7: Screw (M8x40: 8 PCS)

8: Bracket (4 PCS)

9: Bracket (5 PCS)

10: Nut (2 PCS)

11: Pin (1 PC)

12: Allen Wrench (2 PCS)

Assembly Steps

Step 1:

Attach part A (1 pc) and part B (1 pc) using 2 of washer (1) and 2 of screw (4).

Step 2:

Attach 2 of part D and 2 of part E to the assembly from Step 1, using 8 of washer (1) and 8 of screw (4).

Step 3:

Attach 2 of part I to the structure, using 8 of washer (1) and 8 of screw (4).

Step 4:

Attach 1 of part H and 1 of part F to the structure, using 6 of washer (1) and 6 of screw (4).

Step 5:

Attach 4 of part G. Use 8 of washer (1), 4 of screw (2), 2 of screw (4), 2 of screw (5), and 2 of nut (10), and 1 of pin (11).

Step 6:

Attach 8 of part W. Use 16 of washer (1), 8 of screw (2), and 8 of screw (4).

Step 7:

Attach 18 of part 3, 4 of part 8, and 5 of part 9.

Step 8:

Attach 2 of part C to the structure, using 8 of screw (2).

Step 9:

Attach 2 of part R, 4 of washer (6), and 4 of screw (7).

Step 10:

Attach 2 of part C and 2 of part R, using 8 of screw (2), 4 of washer (6), and 4 of screw (7).

Step 11:

Assemble the frame components: 2 of K, 2 of L, 2 of M, 2 of J. Use 18 of screw (1) and 18 of screw (2).

Step 12:

Attach the frame: J+K*2, Z+X*2. Use 8 of screw (1) and 8 of screw (4).

Step 13:

Attach the frame: L+M*2. Use 8 of screw (1) and 8 of screw (2).

Step 14:

Attach 2 of part N. Use 8 of screw (1) and 8 of screw (2).

Step 15:

Attach 1 of part Q. Use 4 of screw (1) and 4 of screw (2).

Step 16:

Continue assembly as per diagram.

Step 17:

Attach 2 of part P.

Step 18:

Attach 1 of part O.